GAL ANGLE
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Angle – 900mm Length
Heavy-duty equal angle 100×100×8 mm supplied in a 900 mm length, ideal for brackets, lintels, frames and general fabrication. Hot rolled for strength and toughness, then hot-dip galvanised to resist rust in coastal and outdoor environments. Straight, clean edges allow accurate cutting, drilling and welding on site. Use for structural supports, fencing, trailers and farm repairs where durable, corrosion-resistant steel is required. Trade-ready and easy to handle for workshop or site installation.Equal angle 100×100×8 mm for structural and fabrication use,Hot-dip galvanised for superior corrosion resistance outdoors
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 1200mm
A 1200mm 100 x 100 x 8mm hot rolled galvanised equal angle for structural tasks, bracing and lintel work. The 8mm thickness provides excellent rigidity, while the hot‑dip galvanised finish enhances durability in outdoor or coastal environments. Suitable for fabrication, repairs and general construction where a heavy-duty angle is required. Easy to process with standard cutting and drilling tools.Robust 8mm equal angle section,Galvanised coating for corrosion protection
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 1500mm
A 1500mm hot rolled 100 x 100 x 8mm galvanised equal angle for structural framing, bracing and lintel use. The thicker 8mm section offers greater stiffness and load capability, while the hot‑dip galvanised finish delivers long‑term corrosion resistance in exposed environments. Straight, consistent and easy to drill or cut, it’s suitable for residential and light commercial fabrication and support work.Heavy 8mm gauge for increased load capacity,Hot‑dip galvanised for exterior applications
$100.95
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 1800mm
A 1800mm hot rolled 100 x 100 x 8mm galvanised equal angle suited to heavy-duty framing, lintels and general structural use. The 8mm gauge increases load capacity and stiffness, while the galvanised coating guards against corrosion in exposed applications. Straight, consistent and easy to work, it’s ideal for residential and light commercial fabrication requiring robust angle sections.Thick-gauge equal angle for demanding spans,Hot‑dip galvanised for long service life
$121.17
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 2100mm
A 2100mm 100 x 100 x 8mm hot rolled galvanised equal angle for structural support, lintels and bracing. Offers excellent stiffness and durability for larger spans and exposed conditions. The hot‑dip galvanised coating protects against corrosion, extending service life in outdoor applications. Suitable for fabrication, site cutting and drilling with standard tools.High-strength 8mm equal angle,Galvanised finish for external use
$141.35
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 2400mm
A 2400mm hot rolled 100 x 100 x 8mm galvanised equal angle for demanding structural applications, including large openings and robust bracing. The 8mm thickness ensures high stiffness and load capacity, while the galvanised finish provides long-term protection in exposed environments. Simple to fabricate and install using common site equipment.Heavy 8mm section for larger spans,Hot‑dip galvanised for corrosion resistance
$161.54
-
Vincent Buda & Company 100 x 100 x 8mm Hot Rolled Galvanised Equal Angle – 2700mm
A 2700mm 100 x 100 x 8mm hot rolled galvanised equal angle for wide spans and heavy-duty bracing or lintel applications. The thicker section provides increased rigidity, with hot‑dip galvanising ensuring strong protection against corrosion. Suitable for residential and light commercial projects requiring durable, long-span angle sections.High-capacity 8mm equal angle section,Galvanised coating for harsh environments
$181.73
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 1800mm Length
Unequal angle 150 x 100 x 10mm in a 1800mm length, hot rolled and hot dip galvanised for strong corrosion resistance. Ideal for brackets, frames, lintels, plant platforms, and structural bracing where unequal legs provide fixing flexibility. Supplied ready for drilling, welding, and bolting on site. A reliable trade section for refurbishment and new build works in outdoor or coastal environments.Hot rolled steel, hot dip galvanised,Unequal leg 150 x 100 x 10mm,1.8m length for bracing and frames
$282.22
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 2100mm Length
Hot rolled unequal angle 150 x 100 x 10mm in a 2100mm length, hot dip galvanised for long-term corrosion protection. Ideal for structural trims, lintels, and fabrication where unequal legs provide flexible connections. Easy to process on site—cut, drill, weld, and bolt. A practical stock length for general building, maintenance, and engineering works.Galvanised finish for outdoor use,Unequal 150 x 100 x 10mm profile,2.1m length suits cut-to-size tasks
$329.30
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 2400mm Length
A 2400mm length of 150 x 100 x 10mm unequal angle, hot rolled and galvanised for durability in exposed settings. Suitable for lintels, frames, edge protection, and heavy-duty brackets. Ready for site fabrication—drill, weld, and bolt as required. The galvanised coating helps extend service life in exterior and marine-adjacent applications. A versatile angle for structural and general fabrication tasks.Hot dip galvanised for corrosion resistance,150 x 100 x 10mm structural section,2.4m length for lintels and frames
$376.32
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 2700mm Length
This 2700mm hot rolled unequal angle (150 x 100 x 10mm) is hot dip galvanised for reliable performance in external environments. Use for frames, lintels, bracing, edge protection, and plant supports. Suitable for site fabrication with standard cutting, drilling, welding, and bolting methods. A versatile, trade-grade angle for construction and maintenance projects.Durable hot dip galvanised coating,150 x 100 x 10mm section for framing,2.7m length for structural bracing
$423.36
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 3000mm Length
A 3000mm unequal angle in 150 x 100 x 10mm, hot dip galvanised for corrosion resistance. Commonly used for lintels, raking beams, platforms, and frames where unequal legs offer practical fixing options. Straightforward to fabricate—cut, drill, weld, and bolt as needed. Reliable for use in outdoor or coastal projects.Hot dip galvanised for long service life,Unequal 150 x 100 x 10mm legs,3m length suits beams and lintels
$470.42
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 3300mm Length
This 3300mm 150 x 100 x 10mm unequal angle is hot rolled and galvanised for service in demanding environments. Suitable for lintels, support frames, and general fabrication where unequal legs assist with offset connections. Easy to cut, drill, weld, and bolt. A versatile structural section for trade applications.Hot dip galvanised for outdoor performance,Unequal legs 150 x 100 x 10mm,3.3m length for structural works
$517.45
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 3600mm Length
Hot rolled unequal angle 150 x 100 x 10mm in a 3600mm length, hot dip galvanised for durability in exposed conditions. Ideal for frames, lintels, plant skids, and perimeter bracing. Accepts standard fabrication processes and fixings. A dependable stock section for builders, fabricators, and maintenance crews working on external structures.Corrosion-resistant galvanised steel,150 x 100 x 10mm structural angle,3.6m length for longer spans
$564.51
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 4000mm Length
Unequal angle 150 x 100 x 10mm supplied in a 4000mm length, hot rolled and hot dip galvanised for longevity in external environments. Ideal for frames, lintels, and bracing requiring longer spans. Fabricator-friendly for cutting, drilling, welding, and bolting. A strong and versatile section for construction and maintenance projects.Galvanised finish resists corrosion,150 x 100 x 10mm unequal profile,4.0m length for extended spans
$627.23
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 4500mm Length
This 4500mm 150 x 100 x 10mm unequal angle is hot dip galvanised for reliable external use. Commonly used for structural frames, lintels, platforms, and heavy-duty brackets. Ready for cutting, drilling, welding, and bolting with standard fabrication equipment. A versatile section for trade and construction projects.Corrosion-resistant galvanised coating,Strong 150 x 100 x 10mm profile,4.5m stock length for framing
$705.62
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 5000mm Length
A 5000mm hot rolled unequal angle at 150 x 100 x 10mm with a galvanised finish for outdoor and coastal environments. Suitable for framing, lintels, and bracing where unequal legs allow offset fixings. Easy to process—cut, drill, weld, and bolt. A reliable section for heavy-duty construction and maintenance applications.Hot dip galvanised for long-term protection,150 x 100 x 10mm unequal legs,5.0m length suits extended runs
$784.02
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 5500mm Length
A 5500mm length of 150 x 100 x 10mm unequal angle, hot rolled and galvanised for durable outdoor use. Perfect for longer lintels, frames, and perimeter beams where fewer joins are preferred. Fabricates easily with standard shop and site tools. Dependable performance for building and infrastructure works.Hot dip galvanised structural angle,Unequal legs 150 x 100 x 10mm,5.5m length reduces splice joints
$862.43
-
Vincent Buda & Company 150 x 100 x 10mm Hot Rolled Galvanised Steel Unequal Angle – 6000mm Length
This 6000mm 150 x 100 x 10mm unequal angle is hot dip galvanised for superior corrosion resistance in harsh environments. Ideal for longer lintels, beams, frames, and bracing with minimal splice points. Suitable for standard fabrication methods—cutting, drilling, welding, and bolting. A trade-grade section for new builds and maintenance projects.Galvanised for external durability,Structural 150 x 100 x 10mm angle,6.0m merchant length for fewer joints
$940.81
App now.
