Nails, Screws & Bolts
-
Advanced Timber & Hardware 10.4mm Galvanised Hex Nut (Box 100)
Heavy-duty 10.4mm galvanised hex nuts designed for reliable fastening in structural and general construction applications. The hot-dip galvanised finish offers excellent corrosion resistance for outdoor and coastal environments. Precision-threaded for smooth installation and strong clamping force with matching bolts or threaded rod. Ideal for framing, brackets, and hardware assembly on-site. Supplied in a contractor-friendly box of 100 for efficient inventory and project use.
-
Ark Building Supplies 10.4mm Galvanised Hex Nuts – Box of 100
Heavy-duty 10.4mm galvanised hex nuts designed for reliable fastening in structural and general construction applications. The hot-dip galvanised finish offers excellent corrosion resistance for outdoor and coastal environments. Precision-threaded for smooth installation and strong clamping force with matching bolts or threaded rod. Ideal for framing, brackets, and hardware assembly on-site. Supplied in a contractor-friendly box of 100 for efficient inventory and project use.
-
Sydney Timber & Hardware 10.4mm Galvanised Steel Hex Nuts – Heavy Duty – Box of 100 for Bolts & Fastening
10.4mm Galvanised Hex Nuts – Box of 100. Robust, corrosion-resistant nuts for outdoor and general building applications. The galvanised coating provides improved protection in exposed or damp conditions, supporting long-term, reliable joints. Ideal for use with compatible bolts and threaded rods in steel framing, brackets, and hardware assemblies. Supplied in a contractor-friendly pack of 100 to minimise downtime and ensure you have stock on hand for site work and maintenance tasks.
-
Reo Build 100mm Hex Head Self-Drilling Screws - Box of 500
Install long‑reach fixings into light‑gauge steel with these 100mm hex head self‑drilling screws. The integrated drill point reduces the need for pre‑drilling, improving productivity when attaching brackets, channels and cladding. A hex head provides strong drive engagement and confident seating with a nutsetter. Suitable for general fabrication and framing to steel. Supplied in a trade pack of 500 for efficiency on site. Use appropriate driver settings and PPE for controlled, accurate fastening.
$118.30
-
Advanced Timber & Hardware 10G - 10x100mm Chipboard Screws ZINC Plated - 50
High-grip 10G x 100mm chipboard screws with zinc-plated finish for clean, strong fixing into particleboard, MDF, and softwoods. Sharp thread for fast start and consistent drive with reduced splitting. Zinc plating offers corrosion protection for indoor and sheltered use. Ideal for cabinetry, flooring, and general carpentry. Packaged in a convenient box of 50 for small to medium jobs.
-
Advanced Timber & Hardware 10G - 10x100mm Chipboard Screws ZINC Plated - 500
Trade-pack 10G x 100mm chipboard screws with zinc plating for reliable fixing in particleboard, MDF, and softwoods. Engineered for rapid bite and stable driving, minimising cam-out and surface damage. Zinc finish suits interior and sheltered applications. Ideal for flooring, cabinetry, and general assembly. Supplied in a box of 500 to support large projects and efficient site usage.
-
Advanced Timber & Hardware 10G - 10x65mm Chipboard Screws ZINC Plated - 300
Reliable 10G x 65mm zinc-plated chipboard screws for secure fastening into particleboard, MDF, and softwoods. Designed for quick starting and strong holding power with clean, flush finishes. Suited to cabinetry, framing, and general interior assembly. Corrosion protection suitable for indoor and sheltered areas. Bulk box of 300 for efficient workflow and reduced downtime.
-
Advanced Timber & Hardware 10G - 10x65mm Chipboard Screws ZINC Plated - 50
Quality 10G x 65mm zinc-plated chipboard screws designed for fast, clean fixing in particleboard, MDF, and softwoods. Sharp threads deliver strong holding power and reduced splitting. Ideal for furniture assembly, light framing, and interior carpentry. Zinc plating offers basic corrosion resistance for indoor applications. Supplied in a handy box of 50 for smaller tasks and service work.
-
Advanced Timber & Hardware 10G - 10x65mm Chipboard Screws ZINC Plated - 500
Bulk 10G x 65mm chipboard screws with zinc plating for dependable fastening into particleboard, MDF, and softwoods. Optimised thread for fast penetration and secure hold with clean countersinking. Ideal for cabinetry, flooring underlays, and general carpentry. Pack of 500 supports high-volume installation and site efficiency.
-
Advanced Timber & Hardware 10G - 10x75mm Chipboard Screws ZINC Plated - 300
Trade-quality 10G x 75mm zinc-plated chipboard screws for strong, reliable fastening in particleboard, MDF, and softwoods. Designed for quick bite and smooth driving with reduced splitting. Suitable for interior framing, cabinetry, and general construction. Zinc plating offers corrosion protection for indoor and sheltered conditions. Box of 300 ensures productivity on site.
-
Advanced Timber & Hardware 10G - 10x75mm Chipboard Screws ZINC Plated - 50
Durable 10G x 75mm chipboard screws with zinc-plated finish for secure fixing into particleboard, MDF, and softwoods. Aggressive thread provides fast start and strong holding power. Ideal for cabinetry, shelving, and general interior carpentry. Packaged in a box of 50 for maintenance and small installations.
-
Sydney Timber & Hardware 10G x 100mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 100mm zinc-plated chipboard screws designed for strong fixing into particleboard, MDF and softwood. The coarse thread provides fast bite and excellent holding power, while the countersunk head delivers a flush finish that’s easy to fill or conceal. Zinc plating offers clean appearance and light corrosion protection for interior applications. Ideal for cabinetry, shelving, subflooring and general carpentry. Supplied in a box of 100 to keep projects moving. Compatible with common driver bits for efficient, reliable installation.
-
Ark Building Supplies 10G x 100mm Chipboard Screws – Zinc Plated, Box of 50
High-grip 10G x 100mm chipboard screws with zinc-plated finish for clean, strong fixing into particleboard, MDF, and softwoods. Sharp thread for fast start and consistent drive with reduced splitting. Zinc plating offers corrosion protection for indoor and sheltered use. Ideal for cabinetry, flooring, and general carpentry. Packaged in a convenient box of 50 for small to medium jobs.
-
Ark Building Supplies 10G x 100mm Chipboard Screws – Zinc Plated, Box of 500
Trade-pack 10G x 100mm chipboard screws with zinc plating for reliable fixing in particleboard, MDF, and softwoods. Engineered for rapid bite and stable driving, minimising cam-out and surface damage. Zinc finish suits interior and sheltered applications. Ideal for flooring, cabinetry, and general assembly. Supplied in a box of 500 to support large projects and efficient site usage.
-
Sydney Timber & Hardware 10G x 65mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 65mm zinc-plated chipboard screws engineered for strong, reliable fixing in particleboard, MDF and softwood. Coarse threads drive quickly and grip firmly, while countersunk heads provide a neat, flush finish. Zinc plating offers light corrosion protection for interior environments. Ideal for cabinet carcasses, benchtop supports, shelving and general joinery. Supplied in a box of 100 for continuous productivity on site or in the workshop. Compatible with common driver bits for smooth, repeatable installation and professional outcomes.
-
Ark Building Supplies 10G x 65mm Chipboard Screws – Zinc Plated, Box of 300
Reliable 10G x 65mm zinc-plated chipboard screws for secure fastening into particleboard, MDF, and softwoods. Designed for quick starting and strong holding power with clean, flush finishes. Suited to cabinetry, framing, and general interior assembly. Corrosion protection suitable for indoor and sheltered areas. Bulk box of 300 for efficient workflow and reduced downtime.
-
Ark Building Supplies 10G x 65mm Chipboard Screws – Zinc Plated, Box of 50
Quality 10G x 65mm zinc-plated chipboard screws designed for fast, clean fixing in particleboard, MDF, and softwoods. Sharp threads deliver strong holding power and reduced splitting. Ideal for furniture assembly, light framing, and interior carpentry. Zinc plating offers basic corrosion resistance for indoor applications. Supplied in a handy box of 50 for smaller tasks and service work.
-
Ark Building Supplies 10G x 65mm Chipboard Screws – Zinc Plated, Box of 500
Bulk 10G x 65mm chipboard screws with zinc plating for dependable fastening into particleboard, MDF, and softwoods. Optimised thread for fast penetration and secure hold with clean countersinking. Ideal for cabinetry, flooring underlays, and general carpentry. Pack of 500 supports high-volume installation and site efficiency.
-
Sydney Timber & Hardware 10G x 75mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 75mm zinc-plated chipboard screws for secure fixing into particleboard, MDF and softwood in interior projects. A coarse thread ensures fast driving and high pull-out strength, while the countersunk head seats flush for a clean finish ready for filling or painting. Zinc plating provides light corrosion resistance and a tidy look indoors. Ideal for cabinetry, furniture assembly, shelving and general carpentry. Box of 100 supports ongoing work with fewer interruptions. Suits standard driver bits for consistent results.
-
Ark Building Supplies 10G x 75mm Chipboard Screws – Zinc Plated, Box of 300
Trade-quality 10G x 75mm zinc-plated chipboard screws for strong, reliable fastening in particleboard, MDF, and softwoods. Designed for quick bite and smooth driving with reduced splitting. Suitable for interior framing, cabinetry, and general construction. Zinc plating offers corrosion protection for indoor and sheltered conditions. Box of 300 ensures productivity on site.
-
Ark Building Supplies 10G x 75mm Chipboard Screws – Zinc Plated, Box of 50
Durable 10G x 75mm chipboard screws with zinc-plated finish for secure fixing into particleboard, MDF, and softwoods. Aggressive thread provides fast start and strong holding power. Ideal for cabinetry, shelving, and general interior carpentry. Packaged in a box of 50 for maintenance and small installations.
-
Network Building Supplies 10g x 16mm Flat Top D/point Screw Zinc pk1000
Self-drilling flat top screws designed for fast metal-to-metal fixing without pre-drilling. 10g x 16mm size with zinc plating for corrosion resistance in interior applications. Sharp drill point bites quickly, reducing installation time and tool wear. Ideal for fixing channels, angles, and light gauge steel components. Supplied in a bulk pack of 1000 for productivity on site and consistent, reliable fastening performance.
-
Ark Building Supplies 10mm ID x 24mm OD x 2mm Galvanised Flat Washers – Box of 100
Galvanised flat washers sized 10mm internal diameter, 24mm outer diameter, and 2mm thickness for spreading load and protecting surfaces under bolt heads and nuts. Corrosion-resistant zinc coating suits outdoor and general construction environments. Ideal for timber framing, steelwork, and fencing. Supplied in a box of 100 for efficient site use and inventory control.
-
Sydney Timber & Hardware 10mm x 24mm x 2mm Galvanised Flat Washers – Box of 100 for Bolts & Anchors
Box of 100 galvanised flat washers featuring 10mm internal diameter, 24mm outside diameter, and 2mm thickness. Designed to spread clamping loads, minimise surface damage, and improve joint reliability with bolts and screws. The galvanised finish offers strong corrosion resistance for outdoor and coastal use. Suitable for fencing, framing, bracket assembly, equipment mounting, and general construction. Pair with galvanised fasteners to maintain a consistent protective system and enhance the long-term performance of your connections.
-
Advanced Timber & Hardware 10mm x 24mm x 2mm Galvanised Washers (Box 100)
Galvanised flat washers sized 10mm internal diameter, 24mm outer diameter, and 2mm thickness for spreading load and protecting surfaces under bolt heads and nuts. Corrosion-resistant zinc coating suits outdoor and general construction environments. Ideal for timber framing, steelwork, and fencing. Supplied in a box of 100 for efficient site use and inventory control.
-
Swadlings Timber & Hardware 12 x 100mm Hex Nut Sleeve Anchor – Galvanised – Box of 20
These 12 x 100mm galvanised hex nut sleeve anchors provide reliable medium‑duty fixings into solid concrete and masonry. The expanding sleeve delivers strong grip, while the galvanised finish enhances corrosion resistance for outdoor or damp environments. Ideal for securing brackets, base plates, racking and structural attachments. Install in a properly sized drilled hole, clean out dust, then torque the hex nut to set. Supplied in a box of 20 for trade efficiency. Always follow load charts and embedment guidelines.
-
Swadlings Timber & Hardware 12 x 100mm Hex Nut Sleeve Anchor – Zinc Plated – Box of 20
12 x 100mm zinc plated hex nut sleeve anchors for medium‑duty anchoring in concrete and solid masonry. The expansion sleeve provides secure holding for brackets, handrails, equipment and base plates. Zinc plating offers corrosion protection for indoor and low‑exposure environments. Drill the correct hole size, clear dust, insert anchor and tighten the hex nut to set. Supplied in a 20‑pack for efficient installation across multiple fixings. Use according to manufacturer guidance on edge distances, embedment depth and load capacity.
-
Swadlings Timber & Hardware 12 x 125mm Hex Nut Sleeve Anchor – Zinc Plated – Box of 20
These 12 x 125mm zinc plated hex nut sleeve anchors offer extra embedment length for secure fixing in concrete and masonry. Ideal for mounting heavy brackets, channels, base plates and services in interior or low‑corrosion environments. The expansion sleeve delivers dependable pull‑out resistance when installed to specification. Drill the correct diameter, remove dust, insert and torque the hex nut to set. Supplied in a box of 20 for trade productivity. Observe edge spacing, minimum embedment and load recommendations for safe performance.
-
Swadlings Timber & Hardware 12 x 130mm Hex Nut Sleeve Anchor – Galvanised – Box of 20
12 x 130mm galvanised hex nut sleeve anchors provide increased embedment for robust fixings into concrete and masonry in external or damp conditions. The galvanised coating resists corrosion, while the expansion sleeve secures base plates, posts, brackets and racking. Drill the specified hole, clean dust, seat the anchor and tighten the hex nut to set. Supplied in a 20‑pack for efficient site work. Follow recommended edge distances, embedment depths and torque settings to achieve rated performance.
-
Swadlings Timber & Hardware 12 x 60mm Hex Nut Sleeve Anchor – Galvanised – Box of 25
These 12 x 60mm galvanised hex nut sleeve anchors are suited to medium‑duty fixings in concrete and masonry where shorter embedment is sufficient. Ideal for brackets, fixtures and light base plates in exterior or damp environments. Galvanised coating enhances corrosion resistance. Drill the correct hole size, remove debris, insert and tighten the hex nut to expand the sleeve and lock in place. Supplied in a box of 25 for trade value. Observe installation guidance for safe, reliable anchoring.
-
Swadlings Timber & Hardware 12 x 60mm Hex Nut Sleeve Anchor – Zinc Plated – Box of 25
12 x 60mm zinc plated hex nut sleeve anchors for efficient anchoring of brackets, channels and fixtures into concrete and solid masonry. Best suited to indoor or low‑corrosion environments, the zinc plated finish provides basic protection. The expanding sleeve grips securely when torqued. Drill the specified diameter, clear dust, insert and tighten to set. Supplied in a 25‑pack for productivity. Follow guidance for edge distance, embedment and loading to ensure safe, consistent performance across installations.
-
Swadlings Timber & Hardware 12 x 70mm Hex Nut Sleeve Anchor – Zinc Plated – Box of 25
These 12 x 70mm zinc plated hex nut sleeve anchors provide reliable anchoring in concrete and masonry for indoor services, brackets and base plates. The extra length allows slightly deeper embedment for improved holding. Install by drilling the correct hole, clearing dust, then tightening the hex nut to expand the sleeve. Supplied in a 25‑pack for trade efficiency. Suitable for low‑exposure environments; choose galvanised for exterior conditions. Adhere to recommended embedment depths, spacing and torque values for rated loads.
-
Swadlings Timber & Hardware 12 x 75mm Hex Nut Sleeve Anchor – Galvanised – Box of 25
12 x 75mm galvanised hex nut sleeve anchors deliver dependable fixings in concrete and masonry for outdoor or damp environments. The galvanised coating enhances corrosion resistance, while the expansion sleeve ensures a tight hold on brackets, posts and base plates. Drill the specified diameter, remove dust, insert and torque the hex nut to set. Supplied in a 25‑pack for productivity. Observe edge distances, embedment and torque recommendations for consistent performance and rated load capacity.
-
Advanced Timber & Hardware 12.4mm Galvanised Hex Nut (Box 100)
Durable 12.4mm galvanised hex nuts for secure fastening in structural and general-purpose applications. The corrosion-resistant coating ensures longevity in outdoor and exposed environments. Precision threads provide smooth engagement and strong clamping with bolts and threaded rod. Suitable for framing, brackets, and metalwork. Packaged in a box of 100 for trade efficiency and site convenience.
-
Ark Building Supplies 12.4mm Galvanised Hex Nuts – Box of 100
Durable 12.4mm galvanised hex nuts for secure fastening in structural and general-purpose applications. The corrosion-resistant coating ensures longevity in outdoor and exposed environments. Precision threads provide smooth engagement and strong clamping with bolts and threaded rod. Suitable for framing, brackets, and metalwork. Packaged in a box of 100 for trade efficiency and site convenience.
-
Sydney Timber & Hardware 12.4mm Galvanised Steel Hex Nuts – Box of 100 for Bolts & General Fastening
12.4mm Galvanised Hex Nuts – Box of 100. Heavy-duty corrosion-resistant nuts for general construction, outdoor structures, and coastal or high-moisture environments. The hot-dip galvanised finish enhances durability and service life, ensuring reliable clamping with compatible bolts and threaded rods. Suitable for fastening steelwork, framing, brackets, and fixtures. Supplied in a trade pack of 100 for efficient on-site use and replenishment. Match thread size to corresponding bolts or anchor studs for secure assemblies.
-
Ark Building Supplies 12mm ID x 28mm OD x 2mm Galvanised Flat Washers – Box of 100
Trade-grade galvanised flat washers, 12mm internal diameter, 28mm outer diameter, 2mm thick, designed to distribute load and protect surfaces under nuts and bolt heads. The galvanised finish resists corrosion for outdoor and general construction use. Ideal for timber and steel connections, fencing, and hardware assembly. Supplied in a box of 100 for site efficiency.
-
Sydney Timber & Hardware 12mm x 28mm x 2mm Galvanised Flat Washers – Box of 100 for Bolts & Anchors
Box of 100 galvanised flat washers with 12mm internal diameter, 28mm outside diameter, and 2mm thickness. Provide a broad bearing surface to distribute load, reduce pull-through, and protect timber or metal substrates. Galvanised coating delivers dependable corrosion resistance in exterior and coastal environments. Ideal for use with bolts and threaded fasteners in fencing, framing, brackets, and general construction. Consistent sizing ensures a reliable fit. Use with matching galvanised bolts and nuts to maintain system-wide corrosion protection.
-
Advanced Timber & Hardware 12mm x 28mm x 2mm Galvanised Washers (Box 100)
Trade-grade galvanised flat washers, 12mm internal diameter, 28mm outer diameter, 2mm thick, designed to distribute load and protect surfaces under nuts and bolt heads. The galvanised finish resists corrosion for outdoor and general construction use. Ideal for timber and steel connections, fencing, and hardware assembly. Supplied in a box of 100 for site efficiency.
-
Advanced Timber & Hardware 14G - 10x100mm Bugle Batten Screws Galvanised (Box 100)
Trade-grade 14G x 100mm bugle batten screws with galvanised coating for superior corrosion resistance in treated timbers. Bugle head seats cleanly without crushing fibres, while the coarse thread delivers high pull-out strength in softwood and LVL. Hex drive (10mm) for positive engagement and faster installation. Ideal for battens, deck framing and landscaping. Pack: 100.
-
Advanced Timber & Hardware 14G - 10x100mm Bugle Batten Screws Galvanised (Box 25)
14G x 100mm galvanised bugle batten screws for strong, neat timber fastening. The bugle head reduces timber splitting and the coarse thread provides excellent holding power in softwood, LVL and treated pine. Hex drive (10mm) ensures secure bit engagement and efficient driving. Suited to battens, decking subframes and general construction. Pack: 25.
-
Advanced Timber & Hardware 14G - 10x125mm Bugle Batten Screws Galvanised (Box 50)
Long 14G x 125mm galvanised bugle batten screws designed for deeper penetration and high clamp loads in structural timber assemblies. Bugle head maintains a flush finish; coarse thread maximises grip in treated pine, LVL and softwoods. Hex drive (10mm) for controlled installation. Ideal for thick battens, ledger fixings and heavy duty framing. Pack: 50.
-
Advanced Timber & Hardware 14G - 10x150mm Bugle Batten Screws Galvanised (Box 50)
Extra-long 14G x 150mm galvanised bugle batten screws for high-strength timber connections requiring maximum embedment. The bugle head seats neatly; coarse threads deliver serious holding power in LVL, treated pine and softwood framing. Hex drive (10mm) ensures positive drive and reduced cam-out. Ideal for ledger boards, heavy battens and structural fixings. Pack: 50.
-
Advanced Timber & Hardware 14G - 10x50mm Bugle Batten Screws Galvanised (Box 100)
Compact 14G x 50mm galvanised bugle batten screws for quick, clean fastening of battens and fittings to timber framing. Bugle head minimises timber damage; coarse thread provides secure bite in treated pine and softwoods. Hex drive (10mm) for confident installation with fewer slip-outs. Ideal for light framing, cladding battens and general fix-offs. Pack: 100.
-
Advanced Timber & Hardware 14G - 10x65mm Bugle Batten Screws Galvanised (Box 100)
Versatile 14G x 65mm galvanised bugle batten screws for secure timber-to-timber connections. The bugle head produces a flush finish; coarse thread increases pull-out resistance in softwood, LVL and H3/H4 treated pine. Hex drive (10mm) improves control and speed. Suitable for battens, decking substructures and general construction. Pack: 100.
-
Advanced Timber & Hardware 14G - 10x65mm Bugle Batten Screws Galvanised (Box 25)
Trade-quality 14G x 65mm galvanised bugle batten screws for neat, strong fastening into timber. Bugle head spreads load without crushing fibres; coarse thread delivers excellent grip in treated pine, LVL and softwood. Hex drive (10mm) for positive engagement and fast driving. Perfect for battens, light framing and exterior fixings. Pack: 25.
-
Advanced Timber & Hardware 14G - 10x75mm Bugle Batten Screws Galvanised (Box 100)
Durable 14G x 75mm galvanised bugle batten screws designed for strong, clean timber assemblies. Bugle head finishes flush; coarse thread offers high holding strength in LVL, treated pine and softwood. Hex drive (10mm) reduces cam-out and speeds installation. Ideal for battens, deck framing and general construction. Pack: 100.
-
Advanced Timber & Hardware 14G - 10x75mm Bugle Batten Screws Galvanised (Box 25)
14G x 75mm galvanised bugle batten screws provide robust timber fastening with a neat, flush finish. The coarse thread ensures excellent pull-out resistance in softwood and treated timbers, while the 10mm hex drive improves control and drive speed. Great for deck substructures, battens and framing. Pack: 25.
You have seen 48 out of 1489 products
