Wall Systems
-
Swadlings Timber & Hardware 110mm Permanent Polymer Structural Wall Formwork – 1350mm Length – Dincel
Build faster with this Dincel 110mm permanent polymer wall formwork profile. The 1350mm length is easy to handle on tight sites and around openings, while interlocking panels form a robust, stay-in-place mould for steel‑reinforced concrete. Once poured, it delivers a smooth, low‑maintenance surface ready for coating or lining. Lightweight components reduce lifting requirements and speed installation. Ideal for basements, retaining walls, cores and shafts. Compatible with Dincel corners, caps, guides and reo clips for consistent cover and clean detailing.
-
Swadlings Timber & Hardware 110mm Permanent Polymer Structural Wall Formwork – 1500mm Length – Dincel
This Dincel 110mm permanent polymer formwork profile in 1500mm length balances easy handling with efficient progress on site. Panels interlock to create a stay-in-place form for steel‑reinforced concrete, producing a smooth, durable finish ready for coatings or linings. Lightweight assembly reduces labour and crane time, improving safety and programme certainty. Ideal for basements, retaining walls, lift cores, and general structural walls. Works seamlessly with Dincel corners, end caps, guides and vertical reo clips to achieve consistent cover and clean architectural detailing.
-
Swadlings Timber & Hardware 110mm Permanent Polymer Structural Wall Formwork – 1650mm Length – Dincel
The Dincel 110mm, 1650mm-long profile offers manageable handling with fewer joints per run. Interlocking polymer panels deliver a permanent form for steel‑reinforced concrete, achieving smooth, low‑maintenance walls ready for finishing. Rapid installation reduces labour, scaffolding and wet-trade time. Suitable for basements, retaining walls, cores, shafts and service walls. Compatible with Dincel corners, end caps, guides and vertical reo clips to maintain cover and alignment. A practical length for staged pours, openings, and areas with restricted access, without compromising installation speed.
-
Swadlings Timber & Hardware 110mm Permanent Polymer Structural Wall Formwork – 4500mm Length – Dincel
Maximise productivity with the Dincel 110mm profile in 4500mm length. Extended panels minimise vertical joints for faster assembly and cleaner finishes. The permanent polymer formwork interlocks to create a robust mould for steel‑reinforced concrete, providing a smooth surface ready for coatings or linings. Lightweight yet durable, it reduces crane time and accelerates program delivery. Ideal for continuous wall runs in basements, cores and retaining applications. Use with Dincel corners, end caps, guides and reo clips for precise alignment and consistent reinforcement cover.
-
Swadlings Timber & Hardware 110mm Structural Walling Profile – Dincel, 1200mm Panel
The 110mm Dincel structural walling profile is a lightweight, permanent polymer formwork panel designed for fast, efficient wall construction. Supplied as a 1200mm interlocking panel, it assembles quickly, improves site safety, and reduces curing and stripping steps. Once reinforced and filled, it creates durable, waterproof structural walls suitable for basements, retaining applications and multi‑residential projects. The smooth face requires minimal finishing and supports consistent dimensional accuracy. Use with Dincel accessories and engineering specifications for compliant, high‑quality results and accelerated construction timelines.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 1200mm Length – Dincel
This Dincel 155mm permanent polymer wall formwork profile in a compact 1200mm length is ideal for tight spaces, complex layouts and staged pours. Interlocking panels form a stay-in-place mould for steel‑reinforced concrete, delivering a smooth, durable wall ready for coating or lining. The 155mm cavity supports heavier-duty structural requirements while remaining efficient to install. Lightweight handling reduces lifting demands and speeds construction. Suited to basements, retaining walls and cores. Integrates with Dincel corners, caps, guides and reo clips for accurate cover and neat detailing.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 1350mm Length – Dincel
Choose the Dincel 155mm profile in 1350mm length for manageable handling and refined control around openings and services. Interlocking permanent polymer formwork creates a robust mould for steel‑reinforced concrete, producing smooth, low‑maintenance walls ready for finishes. The 155mm width suits medium to heavy-duty applications while maintaining installation efficiency. Lightweight components reduce labour and crane time. Ideal for basements, retaining structures and building cores. Works with Dincel corners, end caps, guides and vertical reo clips for consistent cover, alignment and clean architectural lines.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 1500mm Length – Dincel
The Dincel 155mm, 1500mm-long permanent polymer formwork profile balances easy handling with fewer joints, helping maintain momentum on site. Panels interlock to form a stay-in-place mould for steel‑reinforced concrete, delivering a smooth surface ready for coatings or linings. Lightweight yet tough, it speeds installation and reduces wet-trade requirements. Ideal for basements, retaining walls, plant rooms and cores. Compatible with Dincel corners, end caps, guides and vertical reo clips to achieve correct reinforcement cover, alignment and neat transitions at junctions and openings.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 1650mm Length – Dincel
Optimise build speed with the Dincel 155mm profile in 1650mm length, offering improved coverage per panel without sacrificing handling on site. The permanent polymer system interlocks to form a robust mould for steel‑reinforced concrete, resulting in smooth, low‑maintenance walls. Lightweight assembly reduces crane use and labour. Ideal for basements, retaining structures, cores and service shafts. Integrates with Dincel corners, end caps, guides and vertical reo clips to maintain consistent cover and deliver clean, professional detailing at corners, ends and penetrations.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 2850mm Length – Dincel
The Dincel 155mm, 2850mm-long profile provides a practical balance between handling and coverage. Interlocking permanent polymer panels form a stay-in-place mould for steel‑reinforced concrete, producing smooth, durable walls ready for coating or lining. Lightweight components reduce lifting requirements and speed installation. Ideal for basements, retaining structures, stair/lift cores and general structural walls. Works seamlessly with Dincel corners, end caps, guides and vertical reo clips to maintain reinforcement cover, alignment and neat architectural detailing at ends, openings and interfaces with other building elements.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 3000mm Length – Dincel
Select the Dincel 155mm permanent polymer formwork in a 3000mm length for efficient coverage and fewer joints. Interlocking panels assemble quickly to form a robust mould for steel‑reinforced concrete, yielding a smooth, low‑maintenance wall finish. Lightweight handling reduces labour and crane time, accelerating programs. Suited to basements, retaining walls, plant rooms and cores. Integrates with Dincel corners, clip-on end caps, guides and vertical reo clips to ensure consistent reinforcement cover, accurate alignment and clean, professional detailing at corners, edges and penetrations.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 3300mm Length – Dincel
This Dincel 155mm profile in 3300mm length reduces vertical joints while remaining manageable to install. Interlocking polymer panels provide permanent formwork for steel‑reinforced concrete, producing smooth, durable walls ready for finishing. Lightweight components and rapid assembly cut labour and wet-trade time. Ideal for basements, retaining structures, cores and long wall runs. Compatible with Dincel corners, clip-on end caps, guides and vertical reo clips for consistent cover, reliable alignment and tidy detailing at junctions, openings and terminations across complex building layouts.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 3600mm Length – Dincel
Achieve faster coverage with the Dincel 155mm, 3600mm-long permanent polymer formwork. Fewer joints mean cleaner lines and improved productivity during installation. Interlocking panels create a stay-in-place form for steel‑reinforced concrete, delivering smooth, low‑maintenance walls ready for coating or lining. Lightweight and efficient, it reduces crane dependence and labour. Ideal for basements, retaining walls and building cores. Use alongside Dincel corners, end caps, guides and vertical reo clips to maintain reinforcement cover and ensure precise, professional detailing at intersections and openings.
-
Swadlings Timber & Hardware 155mm Permanent Polymer Structural Wall Formwork – 4000mm Length – Dincel
Cover more, joint less with the Dincel 155mm permanent polymer formwork in 4000mm length. Longer panels reduce joints and speed vertical progress, creating a clean, consistent wall surface once filled with reinforced concrete. Lightweight handling and rapid interlocking assembly minimise labour and wet trades. Perfect for basements, retaining walls and high walls requiring efficient installation. Use with Dincel corners, end caps, guides and reo clips for accurate alignment, consistent reinforcement cover and streamlined detailing at junctions, edges and openings across the project.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 1200mm Length – Dincel
This Dincel 200mm profile in a compact 1200mm length is perfect for tight access, detailed areas and staged pours. Interlocking permanent polymer panels provide a robust mould for steel‑reinforced concrete, producing a smooth wall ready for finishes. The 200mm cavity accommodates heavier-duty reinforcement layouts, while lightweight handling speeds installation and reduces lifting demands. Ideal for basements, retaining walls and cores with higher load requirements. Works with Dincel corners, end caps, guides and vertical reo clips to maintain cover and achieve tidy, consistent detailing.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 1350mm Length – Dincel
Choose the Dincel 200mm permanent polymer formwork in 1350mm length for precise work around openings and services while retaining structural capacity. Interlocking panels create a permanent mould for steel‑reinforced concrete, delivering a smooth, durable wall finish. Lightweight components facilitate rapid installation and reduced crane time. Ideal for basements, retaining walls, cores and water‑exposed areas. Integrates with Dincel corners, clip-on end caps, guides and vertical reo clips for consistent reinforcement cover, accurate alignment and clean detailing at junctions and terminations.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 1500mm Length – Dincel
The Dincel 200mm, 1500mm-long permanent polymer formwork profile delivers robust performance with manageable handling and fewer joints. Interlocking panels form a stay-in-place mould for steel‑reinforced concrete, achieving smooth, low‑maintenance walls ready for coating or lining. Lightweight assembly reduces labour and wet-trade time, accelerating program delivery. Suitable for basements, retaining walls, plant rooms and cores. Compatible with Dincel corners, end caps, guides and vertical reo clips to maintain consistent cover, reliable alignment and tidy architectural detailing at corners and openings.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 1650mm Length – Dincel
Optimise productivity with the Dincel 200mm profile in 1650mm length, offering improved coverage without compromising handling. The permanent polymer system interlocks to provide formwork for steel‑reinforced concrete, delivering a smooth finish ready for coatings or linings. Lightweight components reduce lifting and crane time. Ideal for basements, retaining structures, cores and long wall runs that demand higher capacity. Use with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover and deliver clean, consistent detailing throughout the build.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 2850mm Length – Dincel
The Dincel 200mm profile in 2850mm length offers a practical balance of handling and reduced jointing. Interlocking permanent polymer panels provide a stay-in-place form for steel‑reinforced concrete, yielding smooth, durable walls ready for finishing. Lightweight assembly improves site productivity and reduces crane time. Ideal for basements, retaining structures and building cores with higher reinforcement demands. Pair with Dincel corner profiles, clip-on end caps, guides and vertical reo clips to maintain cover, alignment and professional detailing at edges, terminations and openings.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 3000mm Length – Dincel
This Dincel 200mm permanent polymer formwork in 3000mm length decreases joints while remaining easy to install. Interlocking panels form a robust mould for steel‑reinforced concrete, delivering a smooth, low‑maintenance surface ready for coating or lining. Lightweight components reduce labour and wet-trade time. Ideal for basements, retaining walls, plant rooms and cores. Works with Dincel corners, end caps, guides and vertical reo clips for consistent reinforcement cover, precise alignment and clean, repeatable detailing at corners, edges and penetrations across the project.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 3150mm Length – Dincel
Increase coverage per panel with the Dincel 200mm profile in 3150mm length. Interlocking permanent polymer sections provide a stay-in-place form for steel‑reinforced concrete, resulting in smooth, durable walls ready for finishing. Lightweight handling accelerates installation and reduces reliance on wet trades. Suited to basements, retaining structures and long wall runs requiring capacity and speed. Combine with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover, ensure reliable alignment and achieve professional detailing at all junctions and openings.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 3300mm Length – Dincel
The Dincel 200mm, 3300mm-long profile reduces joints and streamlines vertical progress. Interlocking polymer formwork creates a permanent mould for steel‑reinforced concrete, delivering smooth, low‑maintenance walls. Lightweight assembly cuts labour and crane time, improving program certainty. Ideal for basements, retaining walls and building cores. Use with Dincel corner profiles, clip-on end caps, guides and vertical reo clips for consistent cover, accurate alignment and crisp detailing at corners, terminations and penetrations, ensuring a clean, repeatable outcome across demanding structural applications.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 3450mm Length – Dincel
Achieve efficient coverage with the Dincel 200mm profile in 3450mm length. Interlocking permanent polymer formwork panels assemble quickly to create a robust mould for steel‑reinforced concrete, producing smooth, durable walls ready for coating or lining. Lightweight handling reduces labour and wet-trade requirements. Ideal for basements, retaining structures, cores and extended wall runs. Works seamlessly with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover, deliver reliable alignment and provide clean, professional detailing at edges and openings.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 3600mm Length – Dincel
Reduce joint frequency and speed installation with the Dincel 200mm, 3600mm-long permanent polymer formwork. Interlocking panels form a stay-in-place mould for steel‑reinforced concrete, yielding a smooth wall ready for coating or lining. Lightweight components improve handling, reduce crane time and shorten programs. Ideal for basements, retaining walls and building cores demanding efficient, reliable outcomes. Pair with Dincel corner profiles, clip-on end caps, guides and vertical reo clips to ensure consistent reinforcement cover, precise alignment and tidy detailing across complex wall geometries.
-
Swadlings Timber & Hardware 200mm Permanent Polymer Structural Wall Formwork – 4000mm Length – Dincel
Cover more area with fewer joints using the Dincel 200mm permanent polymer formwork in 4000mm length. Extended panels speed installation and deliver cleaner lines. Interlocking sections create a robust, stay-in-place form for steel‑reinforced concrete, producing smooth, low‑maintenance walls. Lightweight yet tough, they reduce labour and wet-trade time. Ideal for basements, retaining walls and cores requiring efficiency and capacity. Integrates with Dincel corners, clip-on end caps, guides and vertical reo clips to ensure consistent reinforcement cover, alignment and crisp architectural detailing.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 1200mm Length – Dincel
This Dincel 275mm profile in a compact 1200mm length is well suited to restricted access, intricate layouts and staged pours requiring higher wall capacities. Permanent polymer panels interlock to create a robust mould for steel‑reinforced concrete, producing smooth, low‑maintenance walls ready for finishes. Despite the larger cavity, components remain lightweight for rapid installation. Ideal for substantial retaining walls, tanks, basements and cores. Use with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain correct cover and achieve neat, consistent detailing.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 1350mm Length – Dincel
Select the Dincel 275mm permanent polymer formwork in 1350mm length when heavier-duty walls meet tight-site constraints. Interlocking panels provide a permanent mould for steel‑reinforced concrete, yielding smooth, durable walls ready for coating or lining. Lightweight handling supports fast installation despite the larger cavity. Ideal for major retaining structures, basements and cores. Integrates with Dincel corner profiles, clip-on end caps, guides and vertical reo clips for consistent reinforcement cover, precise alignment and clean detailing at corners, edges and service penetrations.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 1500mm Length – Dincel
The Dincel 275mm, 1500mm-long profile offers enhanced structural capacity with manageable handling and reduced joints. Interlocking permanent polymer formwork creates a robust mould for steel‑reinforced concrete, delivering smooth, low‑maintenance walls. Lightweight components improve productivity and reduce reliance on wet trades. Ideal for substantial retaining walls, tanks, basements and cores. Works with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover, ensure alignment and provide tidy, repeatable detailing at junctions, openings and terminations.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 1650mm Length – Dincel
Boost efficiency on heavy-duty walls with the Dincel 275mm profile in 1650mm length. Interlocking polymer sections deliver permanent formwork for steel‑reinforced concrete, producing smooth, durable surfaces ready for finishing. Lightweight handling and rapid assembly reduce labour and crane time. Ideal for large retaining walls, deep basements and building cores. Combine with Dincel corner profiles, clip-on end caps, guides and vertical reo clips to maintain consistent reinforcement cover, achieve reliable alignment and produce clean, professional detailing across complex wall geometries.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 2850mm Length – Dincel
This Dincel 275mm, 2850mm-long profile balances handling and reduced joint frequency for heavy-duty walls. Interlocking permanent polymer panels create a robust mould for steel‑reinforced concrete, delivering smooth, durable surfaces ready for finishing. Lightweight assembly streamlines installation and mitigates crane needs. Ideal for substantial retaining structures, basements and cores. Works seamlessly with Dincel corner profiles, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover, ensure reliable alignment and provide neat, repeatable detailing at corners, edges and penetrations.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 3000mm Length – Dincel
Choose the Dincel 275mm permanent polymer formwork in 3000mm length to reduce joints while retaining manageable handling for heavy-duty walls. Interlocking panels create a stay-in-place mould for steel‑reinforced concrete, yielding a smooth, low‑maintenance finish. Lightweight components accelerate installation and reduce wet-trade work. Ideal for large retaining walls, tanks, deep basements and structural cores. Integrates with Dincel corners, clip-on end caps, guides and vertical reo clips to ensure consistent reinforcement cover, accurate alignment and clean detailing throughout complex wall runs.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 3600mm Length – Dincel
Reduce joints and speed installation on heavy-duty walls with the Dincel 275mm profile in 3600mm length. Permanent polymer panels interlock to create a robust mould for steel‑reinforced concrete, delivering smooth, durable walls ready for coating or lining. Lightweight handling improves productivity and reduces crane requirements. Ideal for major retaining structures, tanks, basements and cores. Use alongside Dincel corners, clip-on end caps, guides and vertical reo clips to maintain reinforcement cover, achieve precise alignment and produce crisp, consistent architectural detailing.
-
Swadlings Timber & Hardware 275mm Permanent Polymer Structural Wall Formwork – 4000mm Length – Dincel
Speed large-scale wall construction with the Dincel 275mm permanent polymer formwork in 4000mm length. Extended panels minimise joints and improve productivity while forming a robust stay-in-place mould for steel‑reinforced concrete. The result is a smooth, low‑maintenance wall ready for coating or lining. Despite the larger cavity, lightweight components simplify handling. Ideal for substantial retaining walls, tanks, deep basements and cores. Use with Dincel corners, clip-on end caps, guides and vertical reo clips to maintain cover, control alignment and achieve crisp detailing.
-
Swadlings Timber & Hardware 275mm Window Sill / Wall Splicer – 3600mm Length – Dincel Permanent Formwork
Create clean, accurate transitions with the Dincel 275mm Window Sill / Wall Splicer in 3600mm length. Designed for the Dincel permanent polymer wall system, this accessory forms neat window sills and splices wall runs, ensuring alignment and continuity across openings. Lightweight and easy to handle, it speeds installation and improves finish quality. Ideal for architectural facades and structural walls where consistent detailing is essential. Works with Dincel wall profiles, corner profiles and clip-on end caps to deliver a professional, integrated result.
-
Reo Point Dincel 110P - Screw on Top 3mtr
3000mm screw-on top accessory for the Dincel 110P permanent formwork system. Provides a neat, secure top finish to panels and assists alignment during construction. Designed for straightforward installation, improving speed and quality on site. Suitable for residential, commercial, and civil wall applications where Dincel’s polymer formwork is specified.
-
Reo Point Dincel 110P Corner 3000
3000mm Dincel 110P corner section for creating clean, robust external or internal corners in permanent polymer formwork walls. Engineered to integrate with 110P panels, ensuring alignment and continuity. Reduces labour and finishing time with a consistent, professional corner detail. Suitable for residential, commercial, and civil projects using Dincel wall systems.
-
Reo Point Dincel 110P Screw on Cap 3mtr
3000mm screw-on cap for Dincel 110P panels, delivering a secure termination or protective edge to panel runs. Enhances finish quality and simplifies installation while maintaining system integrity. Ideal for wall tops or transitions where a durable, neat edge is required.
-
Reo Point Dincel 110P- Guide 3000
3000mm guide track for Dincel 110P panels, used as a starter and alignment member to speed accurate installation. Ensures straight, true walls and reduces rework. Compatible with Dincel’s permanent formwork system for residential and commercial applications where dimensional accuracy and finish quality are critical.
-
Reo Point Dincel 110P-End Cap 3000 Clip
Clip-on end cap, 3000mm, for Dincel 110P panels to neatly terminate wall ends and protect edges. Quick to install, improving aesthetics and reducing site finishing time. A durable accessory designed to complement the Dincel permanent formwork system in a variety of wall configurations.
-
Reo Point Dincel 110P-WS Wall Splicer
Wall splicer accessory for Dincel 110P-WS, used to join panels and maintain alignment across wall sections. Enhances structural continuity and speeds assembly, reducing labour. A robust, reliable accessory for forming continuous permanent formwork walls in residential and commercial projects.
-
Reo Point Dincel 110P-WS Wind/Wall Splicer
Wind/Wall splicer accessory for Dincel 110P-WS panels, assisting in joining and stiffening panel runs against lateral loads during construction. Supports alignment and reduces deflection before and during concrete placement. Designed for efficient installation in permanent formwork wall systems.
-
Reo Point Dincel 155P- Screw on Cap
Screw-on cap for Dincel 155P panels to provide a tidy, secure termination or protective edge. Improves finish quality and simplifies installation with a durable, system-compatible accessory. Suitable for use on wall tops and transitions in permanent formwork construction.
-
Reo Point Dincel 155P-EC End Cap
End cap accessory for Dincel 155P panels to neatly finish wall ends and protect edges. Quick to install and engineered to integrate with the Dincel system. Enhances aesthetics and reduces site finishing time across residential and commercial wall applications.
-
Reo Point Dincel 155P-WS Wind/Wall Spicer 3mtr
3000mm wind/wall splicer for Dincel 155P-WS panels, designed to join and stiffen walls during construction. Aids alignment, reduces deflection, and speeds installation prior to concrete placement. Durable and system-compatible for reliable performance on permanent formwork projects.
-
Reo Point Dincel 200P-Screw on Cap 3600
3600mm screw-on cap for Dincel 200P panels, providing a secure and neat termination or protective top. Improves wall finish and simplifies installation. Designed for use in permanent formwork systems on residential, commercial, and civil projects requiring consistent, quality detailing.
-
Reo Point Dincel 200P-Stop End 3600
3600mm stop end for Dincel 200P panels to neatly terminate wall runs and protect edges. Speeds installation and helps achieve a professional finish. A robust component designed to integrate with Dincel’s permanent formwork walls in varied configurations.
-
Reo Point Dincel 275P-End Clip 3600
3600mm end clip for Dincel 275P panels, enabling fast, tidy terminations and improved edge protection. A system-compatible accessory aiding alignment and reducing finishing time. Suitable for high-wall applications in residential and commercial projects using permanent formwork.
-
Royal Formwork Solutions Dincel 275P-J Joiner 3600mm
Joiner for Dincel 275P panels, 3600mm length, providing secure panel connections and straight alignment. The durable, accurately formed profile minimises grout loss and accelerates installation for cleaner finishes. Suitable for basements, cores and retaining walls. Integrates with Dincel edge guides, end caps and top caps for a complete permanent formwork solution. Code: 275P-J.
You have seen 48 out of 183 products
