H3 Pine
-
Builders Mitre 10 Baltic Pine T2 MGP10 70 x 35mm per Lm
This Baltic Pine T2 MGP10 timber is graded for strength and durability, suitable for structural framing and general building use. Its consistent quality and ease of handling make it ideal for residential and light commercial construction.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 3.6m (H3)
Exterior‑grade H3 CCA treated pine designed for above‑ground structural applications. Provides resistance to fungal decay and insect attack. Ideal for decks, pergolas and general outdoor framing. Cut and fix with standard tools; seal all cut ends and use corrosion‑resistant fasteners. Comply with span tables and engineered design for performance.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 3m (H3)
H3 CCA treated pine for exterior, above‑ground structural use. Pressure treatment resists decay and insects, suiting decks, pergolas, bearers and general outdoor framing. Dress and cut with standard tools; seal cut ends with appropriate preservative and prime before painting. Use corrosion‑resistant fasteners in treated timber. Follow span tables and engineering design for compliance.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 4.2m (H3)
H3 CCA treated pine for durable exterior, above‑ground structural use. Suits bearers, joists, pergola beams and general framing. Pressure treatment protects against decay and termites. Use corrosion‑resistant fixings and seal all cut ends with approved preservative. Follow engineered design and local standards for spans and fixings.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 4.8m (H3)
Exterior H3 CCA treated pine section suitable for above‑ground structural applications including decks and pergolas. Treatment resists decay and insect attack. Easy to cut and fix; seal all cut ends, prime and paint where applicable. Use corrosion‑resistant fasteners for longevity. Install per engineering and local building codes.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 5.4m (H3)
H3 CCA treated pine for above‑ground exterior structural applications. Durable treatment helps resist rot and termites. Ideal for pergolas, decks and general framing. Cut with standard tools; seal end cuts and use corrosion‑resistant fixings. Design and install to span tables and engineering requirements.
-
Ark Building Supplies CCA Treated Pine Outdoor Structural Timber – 190 x 45mm x 6m (H3)
Long‑length H3 CCA treated pine for exterior, above‑ground structural use. Treatment protects against decay and insects, suiting decks, pergolas and general outdoor framing. Fix with corrosion‑resistant fasteners and seal all cut ends with suitable preservative. Follow engineered design and local standards for spans and fixings.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 3.0m (H3)
Structural H3 CCA treated pine, 240 x 45mm x 3.0m, designed for external above‑ground applications. Provides resistance to decay and insect attack in exposed environments. Straight, stable and easy to work for decks, pergolas, fascia and exterior framing where added durability is required. Reliable fastener holding with nails and screws. Always follow appropriate fixings and coating guidance for outdoor use.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 3.6m (H3)
H3 CCA treated pine structural timber in 240 x 45mm x 3.6m for durable exterior framing. Treated for resistance to decay and insects in above‑ground exposure. Straight and workable; ideal for decks, pergolas, fascia and outdoor trims. Provides dependable structural performance and secure fixing with appropriate fasteners. Apply suitable coatings for enhanced weathering protection.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 4.2m (H3)
Exterior-grade H3 CCA treated pine, 240 x 45mm x 4.2m, for above‑ground structures. Treatment protects against rot and insect attack, making it suitable for decks, pergolas, fascia and outdoor framing. Straight and stable for efficient installation with nails or screws. Apply recommended coatings and maintain fixings for long-term performance.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 4.8m (H3)
H3 CCA treated pine in 240 x 45mm x 4.8m for durable outdoor framing. Resistance to decay and insect attack supports long service life in above‑ground, exposed conditions. Straight, easy to work and suitable for decks, pergolas and fascia. Use corrosion-resistant fasteners and appropriate coatings for best results.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 5.4m (H3)
Long 5.4m length H3 CCA treated pine, 240 x 45mm, for exterior above‑ground structures. Treatment enhances resistance to rot and insects. Straight and stable for decks, pergolas, fascia and general outdoor framing. Use with suitable corrosion-resistant fixings and apply recommended coatings to improve durability.
-
Ark Building Supplies CCA Treated Pine Structural Timber – 240 x 45mm x 6.0m (H3)
Exterior structural H3 CCA treated pine, 240 x 45mm x 6.0m, for long runs with fewer joints. Treated for enhanced durability against decay and insects in above‑ground exposure. Straight and workable for decks, pergolas, fascia and outdoor framing. Use corrosion-resistant fasteners and maintain surface coatings for longevity.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 3.0m (H3)
This 190 x 45mm H3 CCA Treated Pine, 3.0m length, is ideal for external bearers, joists, rafters and heavy-duty framing above ground. H3 copper chrome arsenate treatment provides reliable resistance to decay, fungal attack and termites. Straight and easy to work for precise carpentry, it performs well in pergolas, verandahs and deck substructures. Fix with galvanised or stainless steel hardware and finish with exterior-grade coatings. Seal cut ends with a timber preservative. Not suitable for in-ground, freshwater or marine contact; use higher hazard classes where exposure is greater.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 3.6m (H3)
This 190 x 45mm H3 CCA Treated Pine, 3.6m length, suits external, above-ground bearers, joists, rafters and general heavy framing. H3 copper chrome arsenate treatment resists decay, fungi and termites in exposed settings. Straight, stable and workable, it is excellent for pergolas, verandahs and deck substructures. Install with galvanised or stainless steel fixings and protect with exterior-grade coatings. Always seal cut ends and rebates with preservative. Not appropriate for in-ground or marine environments; select higher hazard classes when ground contact or water immersion may occur.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 4.2m (H3)
This 190 x 45mm H3 CCA Treated Pine, 4.2m length, is designed for external above-ground structural roles such as bearers, joists and rafters. The H3 copper chrome arsenate treatment protects against decay, fungal attack and termites. Straight and easy to cut, drill and fasten, it delivers reliable performance in pergolas, verandahs and deck subframes. Use galvanised or stainless steel fixings and exterior timber coatings. Seal all cut ends with a suitable preservative. Not for in-ground or marine use; choose higher hazard classes for soil or water contact situations.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 4.8m (H3)
This 190 x 45mm H3 CCA Treated Pine, 4.8m long, offers dependable performance for external above-ground bearers, joists and rafters. H3 copper chrome arsenate treatment resists decay, fungi and termites in exposed applications. Straight and workable for accurate construction, it is well-suited to pergolas, verandahs and deck substructures. Fix with galvanised or stainless steel hardware and finish with exterior-grade coatings. Seal all cut ends and notches with preservative. Not suitable for in-ground or marine exposure; use higher hazard classes where direct soil or water contact occurs.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 5.4m (H3)
This 190 x 45mm H3 CCA Treated Pine, 5.4m length, is engineered for external above-ground applications including bearers, joists and rafters. The H3 copper chrome arsenate treatment provides protection against decay, fungi and termites. Straight, stable and easy to machine, it is ideal for pergolas, verandahs and deck subframes. Use galvanised or stainless steel fixings with exterior timber coatings for longevity. Seal cut ends with a preservative. Not intended for in-ground or marine exposure; opt for higher hazard classes where direct soil or water contact is expected.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 190 x 45mm x 6.0m (H3)
This 190 x 45mm H3 CCA Treated Pine, 6.0m length, provides long-span capability for external, above-ground bearers, joists and rafters. H3 copper chrome arsenate treatment resists decay, fungal attack and termites in exposed environments. Straight and easy to work for precise installation, it suits pergolas, verandahs and deck substructures. Fix with galvanised or stainless steel hardware and finish with exterior-grade coatings. Seal all cut ends with preservative. Not suitable for in-ground or marine exposure; select higher hazard classes for soil contact or immersion conditions.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 240 x 45mm x 3.0m (H3)
This 240 x 45mm H3 CCA Treated Pine, 3.0m length, is suited to external beams, bearers and large-span framing above ground. The H3 treatment protects against decay, fungi and termites in exposed environments. Straight, stable and easy to work, it is ideal for pergolas, carports and deck subframes. Use galvanised or stainless steel fixings and exterior coatings for long-term durability. Seal all cut ends with preservative sealer. Not for in-ground or marine exposure; choose higher hazard classes where ground contact or immersion is required and verify spans appropriately.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 3.0m (H3)
Compact and versatile, this 70 x 35mm H3 CCA Treated Pine is ideal for light above‑ground exterior applications. H3 treatment helps protect against rot and termite attack in exposed conditions. Use for battens, light screening, fence rails, garden edging and general outdoor repairs. Consistent sizing supports neat installation with standard fixings. Easy to cut and handle on site. The 3.0m length is convenient for small projects and confined areas, reducing waste and simplifying transport.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 3.6m (H3)
70 x 35mm H3 CCA Treated Pine suits light exterior framing and finishing above ground. H3 treatment enhances resistance to decay and termites in exposed environments. Common uses include battens, screens, fence rails, trims and garden projects. Uniform dimensions allow quick installation with typical brackets and screws. Easy to cut and assemble. The 3.6m length provides efficient coverage for many layouts, reducing joints and helping achieve a clean, consistent finish outdoors.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 4.2m (H3)
This 70 x 35mm H3 CCA Treated Pine is designed for light above‑ground exterior applications. H3 treatment helps guard against rot and termite activity in exposed conditions. Ideal for battens, screening, light framing and garden structures. Accurate sizing ensures compatibility with standard fixings and connectors. Easy to cut, drill and screw for fast installation. The 4.2m length is useful for longer runs and fewer joints, improving aesthetics and build efficiency across outdoor projects.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 4.8m (H3)
70 x 35mm H3 CCA Treated Pine provides dependable performance above ground for light outdoor tasks. H3 treatment offers resistance to decay and termites in exposed environments. Use for battens, screens, trims, light framing and garden constructions. Precision dressed for consistent fit with standard fixings. Workable and easy to install. The 4.8m length reduces the number of joints across runs, improving finish and speeding installation on exterior screening and battening jobs.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 5.4m (H3)
Designed for light exterior use above ground, this 70 x 35mm H3 CCA Treated Pine resists rot and termites in exposed conditions. Ideal for battens, screening, light trims and garden structures. Uniform dimensions integrate neatly with common brackets and screws for fast installation. Straight, easy to cut and handle. The 5.4m length supports extended runs with fewer joints, improving appearance and efficiency on outdoor battening and screening applications.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 35mm x 6.0m (H3)
This 70 x 35mm H3 CCA Treated Pine is a practical solution for light, above‑ground exterior applications. H3 treatment helps protect against decay and termites in exposed environments. Suitable for battens, light framing, screening and garden projects. Consistent sizing suits common fixings for quick, tidy assembly. Easy to cut and install. The 6.0m length minimises joins across long runs, enhancing finish quality and reducing installation time on larger outdoor works.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 45mm x 3.0m (H3)
70 x 45mm H3 CCA Treated Pine is a practical option for light exterior framing above ground. H3 treatment helps resist decay and termites in exposed conditions. Suitable for fence rails, light studs, noggings, battens, pergola infill and general outdoor framing. Consistent sizing supports fast assembly with common connectors and fixings. Easy to cut, drill and screw. The 3.0m length is ideal for smaller projects and tight access sites, helping reduce handling and waste.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 45mm x 3.6m (H3)
This 70 x 45mm H3 CCA Treated Pine is designed for above‑ground exterior use where durability is required. H3 treatment helps protect against fungal decay and termites. Ideal for light framing, battens, fence rails, pergola infill and general outdoor structures. Uniform dimensions ensure compatibility with standard fixings and brackets. Workable and easy to install. The 3.6m length provides efficient coverage for common spacings, reducing joins and improving build speed on site.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 45mm x 4.2m (H3)
70 x 45mm H3 CCA Treated Pine offers reliable performance for above‑ground outdoor applications. H3 treatment enhances resistance to rot and termite attack in exposed environments. Common uses include light framing, noggings, battens, screens and pergola details. Consistent sizing integrates neatly with connectors and fixings for quick installation. Easy to cut and fasten. The 4.2m length is useful for longer runs and reduced joints, improving appearance and efficiency across outdoor projects.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 45mm x 4.8m (H3)
Built for durability above ground, this 70 x 45mm H3 CCA Treated Pine suits a wide range of exterior tasks. H3 treatment helps guard against decay and termites in exposed conditions. Ideal for light framing, battens, fence rails, garden structures and pergola infill. Precision dressed for compatibility with standard brackets and fasteners. Straight, easy to cut and assemble. The 4.8m length reduces joints and speeds installation across longer sections of outdoor framing and screening.
-
Sydney Timber & Hardware CCA Treated Pine Timber – 70 x 45mm x 5.4m (H3)
This 70 x 45mm H3 CCA Treated Pine is suitable for above‑ground exterior use in exposed environments. H3 treatment helps resist rot and termites for longer service life outdoors. Use for light framing, battens, screens, pergola infill and general construction. Consistent dimensions fit standard fixings and connectors, enabling quick installation. Easy to cut, drill and screw. The 5.4m length is effective for extended runs, reducing the number of joints and improving finish quality.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 3.0m (H3)
140 x 45mm H3 CCA Treated Pine is a versatile choice for above‑ground exterior framing. H3 treatment helps guard against decay and termites, making it suitable for exposed outdoor use. Ideal for deck joists, ledgers, pergola rafters and general exterior framing. Consistent dimensions enable fast installation with standard connectors and fixings. Easy to cut, drill and screw. The 3.0m length is convenient for tight sites and smaller spans, reducing handling effort and onsite waste.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 3.6m (H3)
This 140 x 45mm H3 CCA Treated Pine suits a wide range of above‑ground outdoor applications. H3 treatment enhances resistance to rot and termite attack for durability in exposed conditions. Common uses include deck joists, plates, rafters and general structural framing. Accurate sizing integrates well with brackets, hangers and other timber connectors. Straight, easy to work and quick to fasten. The 3.6m length is ideal for medium spans and efficient deck joist layouts with fewer joints.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 4.2m (H3)
140 x 45mm H3 CCA Treated Pine provides reliable structural performance for above‑ground exterior projects. H3 treatment helps resist fungal decay and termites in exposed environments. Ideal for deck joists, ledgers, pergola rafters and outdoor framing. Consistent dimensions suit standard fixings and connectors for rapid installation. Easy cutting and fastening on site. The 4.2m length supports efficient joist spacing and reduces joints, improving build speed and finish on decks and pergolas.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 4.8m (H3)
Engineered for outdoor durability, this 140 x 45mm H3 CCA Treated Pine performs above ground in exposed conditions. H3 treatment helps protect against rot and termite attack. Ideal for deck joists, bearers in lighter spans, pergola rafters and general framing. Precision dressed for a consistent fit with hangers and brackets. Easy to cut and fasten with nails or screws. The 4.8m length reduces the number of joins, streamlining deck layouts and pergola construction.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 5.4m (H3)
This 140 x 45mm H3 CCA Treated Pine is suitable for above‑ground exterior use where durability counts. H3 treatment offers resistance to decay and termites in exposed environments. Commonly used for deck joists, ledgers and pergola rafters. Accurate sizing matches standard connectors and fasteners for quick installation. Clean to cut and assemble. The 5.4m length enables extended spans and fewer joints, improving strength continuity and build efficiency on larger outdoor structures and decks.
-
Sydney Timber & Hardware CCA Treated Pine – 140 x 45mm x 6.0m (H3)
140 x 45mm H3 CCA Treated Pine delivers dependable performance for above‑ground exterior framing. H3 treatment helps guard against rot and termite attack, suitable for exposed conditions. Ideal for deck joists, perimeter beams, rafters and general outdoor framing. Uniform dimensions suit hangers, brackets and other timber connectors. Easy to work and fix with standard tools. The 6.0m length minimises joints across long runs, improving structural continuity and reducing installation time on larger decks and pergolas.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 3.6m (H3)
Exterior‑grade H3 CCA treated pine designed for above‑ground structural applications. Provides resistance to fungal decay and insect attack. Ideal for decks, pergolas and general outdoor framing. Cut and fix with standard tools; seal all cut ends and use corrosion‑resistant fasteners. Comply with span tables and engineered design for performance.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 3m (H3)
H3 CCA treated pine for exterior, above‑ground structural use. Pressure treatment resists decay and insects, suiting decks, pergolas, bearers and general outdoor framing. Dress and cut with standard tools; seal cut ends with appropriate preservative and prime before painting. Use corrosion‑resistant fasteners in treated timber. Follow span tables and engineering design for compliance.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 4.2m (H3)
H3 CCA treated pine for durable exterior, above‑ground structural use. Suits bearers, joists, pergola beams and general framing. Pressure treatment protects against decay and termites. Use corrosion‑resistant fixings and seal all cut ends with approved preservative. Follow engineered design and local standards for spans and fixings.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 4.8m (H3)
Exterior H3 CCA treated pine section suitable for above‑ground structural applications including decks and pergolas. Treatment resists decay and insect attack. Easy to cut and fix; seal all cut ends, prime and paint where applicable. Use corrosion‑resistant fasteners for longevity. Install per engineering and local building codes.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 5.4m (H3)
H3 CCA treated pine for above‑ground exterior structural applications. Durable treatment helps resist rot and termites. Ideal for pergolas, decks and general framing. Cut with standard tools; seal end cuts and use corrosion‑resistant fixings. Design and install to span tables and engineering requirements.
-
Advanced Timber & Hardware CCA Treated Pine – 190 x 45mm x 6m (H3)
Long‑length H3 CCA treated pine for exterior, above‑ground structural use. Treatment protects against decay and insects, suiting decks, pergolas and general outdoor framing. Fix with corrosion‑resistant fasteners and seal all cut ends with suitable preservative. Follow engineered design and local standards for spans and fixings.
-
Swadlings Timber & Hardware FLAMEfixx Decking Boards – 90 x 22mm (H3 Treated Pine)
FLAMEfixx 90 x 22 mm H3 treated pine decking boards provide a versatile, economical solution for exterior decks and walkways above ground. H3 treatment helps resist decay and termite attack, while the stable, straight boards are easy to cut and fasten. Compatible with galvanised or stainless fixings, they install quickly and accept stains or paints for a customised finish. Use appropriate spacings and ventilation for performance and longevity. Ideal for residential decks, verandas and alfresco areas requiring a durable timber surface.
-
Swadlings Timber & Hardware FLAMEfixx R/H Structural Timber – 140 x 45mm x 3.6m (H3 MGP10 Treated Pine)
FLAMEfixx H3 MGP10 treated pine in 140 x 45 mm section provides dependable exterior, above‑ground structural performance. The MGP10 machine grade ensures consistent strength, while H3 treatment helps resist decay and termite attack. Supplied with an R/H finish, it’s straight, stable and easy to cut and fix using standard connectors. At 3.6 m, it’s suited to joists, beams and general outdoor framing in decks and pergolas. Use galvanised or stainless steel fasteners and apply appropriate coatings for long‑term durability.
-
Swadlings Timber & Hardware FLAMEfixx R/H Structural Timber – 140 x 45mm x 4.2m (H3 MGP10 Treated Pine)
This FLAMEfixx 140 x 45 mm H3 MGP10 treated pine length delivers reliable strength and durability for outdoor, above‑ground framing. MGP10 grading provides consistent structural performance, and H3 treatment helps guard against decay and termites. The R/H finish offers a straight, uniform surface that is easy to cut, drill and fasten with standard hardware. At 4.2 m long, it suits joists, beams and pergola members, reducing joins on typical spans. Use corrosion‑resistant fixings and exterior coatings for a long‑lasting result.
-
Swadlings Timber & Hardware FLAMEfixx R/H Structural Timber – 140 x 45mm x 4.8m (H3 MGP10 Treated Pine)
FLAMEfixx 140 x 45 mm H3 MGP10 treated pine is ideal for outdoor framing where consistent strength and durability are required. The MGP10 grade assures predictable performance, while H3 treatment resists decay and termite attack in above‑ground environments. Supplied R/H for a straight, stable finish, it’s simple to work with and fits standard connectors. The 4.8 m length helps cover longer spans with fewer joins, improving speed and appearance. Use galvanised or stainless fixings and apply suitable exterior coatings.
-
Swadlings Timber & Hardware Fence Paling – 100 x 15mm x 2.4m Treated Pine
Create classic, durable fencing with this 100 x 15 mm treated pine paling, 2.4 m long. Light yet robust, it’s easy to handle, cut and nail, making it ideal for new fences, repairs, gates and privacy screening. The consistent dimensions help achieve tight spacing and a neat, even finish. It readily accepts stains or paints for a custom look. Use with treated rails and posts plus galvanised fasteners to ensure long‑lasting outdoor performance. Suitable for residential boundary and garden applications.
You have seen 48 out of 423 products
Trade Materials — in Hours, Not Days
Get instant quote, book online, and have materials delivered fast.
©2026 iDlvr. All Rights Reserved.
