Drain & Grate Accessories
-
Vincent Buda & Company 100 mm Waste Saver Floor Waste Trap – Odour Seal – Drop-In Retrofit
Floor waste accessory that helps block sewer odours and pests while allowing normal drainage. The drop-in design suits 100 mm outlets for fast installation with minimal tools. Useful in bathrooms, showers and amenities with intermittent water use where water seals may dry out. A practical option for facilities maintenance and residential upgrades. Confirm compatibility with existing grates and outlet dimensions before installing.
-
Vincent Buda & Company 100mm x 28mm Plastic Corner Grate & Drain Kit – 90° for Strip Channels
Corner grate and drain kit to suit 100mm x 28mm strip channel systems. Forms a neat 90° turn while maintaining flow and a continuous grate line. Durable plastic construction for exterior use with compatible grates. Ideal for patios, pool areas and pathways. Simple to install with sealant and fixings for a tidy, watertight corner connection.
-
Vincent Buda & Company 110mm W x 60mm D End Cap – Stainless Steel
110mm W x 60mm D stainless steel end cap to finish linear grate and channel installations. Provides a clean, sealed termination while matching the grate finish. Corrosion resistant for bathrooms, balconies and outdoor areas. Sized to suit 110mm x 60mm channels for a neat, professional result and quick installation with reliable long-term durability.
-
Vincent Buda & Company 110mm x 60mm Stainless Steel Drain Channel Joiner – Size to Suit
Precision-made joiner for linear drain channels sized 110mm x 60mm. Fabricated in stainless steel for corrosion resistance and long service life. Aligns and secures adjoining channel sections for straight, rigid runs. Ideal for bathrooms, courtyards and patios. Designed as a size-to-suit component for compatible strip drain profiles. Simple to fit on-site with standard fixings and sealant for a tidy, leak-resistant connection.
-
Vincent Buda & Company 115mm x 80mm Aluminium Drain Channel Joiners – Size to Suit
Aluminium joiners to suit strip drain channels sized 115mm x 80mm. Accurately aligns and fastens adjoining channel sections for straight, rigid runs with consistent flow. Manufactured from corrosion-resistant alloy for long service life. Suitable for patios, driveways and landscaping projects. Quick to install using standard fixings and sealants to produce a tidy, watertight join between sections.
-
Vincent Buda & Company 115mm x 80mm Aluminium Drain End Caps – Size to Suit
Aluminium end caps to suit strip drain channels sized 115mm x 80mm. Close off channel ends neatly to prevent debris ingress and guide water to designated outlets. Lightweight, corrosion-resistant alloy with a clean, architectural finish. Ideal for residential and commercial landscaping, patios and garages. Simple to fit with sealant and screws to create a secure, watertight end termination.
-
Vincent Buda & Company 115mm x 80mm Aluminium Drain Outlet – 76mm Outlet, Size to Suit
Aluminium outlet fitting to suit strip drain channels sized 115mm x 80mm, with 76mm outlet connection. Provides a compact discharge point to stormwater or waste piping while maintaining low profile depth. Corrosion-resistant alloy construction for exterior durability. Ideal for patios, pathways and paved areas. Install with sealant and mechanical fastening for a reliable, watertight connection.
-
Vincent Buda & Company 125mm W x 80mm D Box Grate End Cap – Galvanised Steel
125mm W x 80mm D galvanised steel box grate end cap to neatly close off channel runs and contain concrete pours. Durable, corrosion-resistant steel suits external pavements and hardstand areas. Sized to suit 125mm x 80mm systems, it delivers a clean termination point while preventing debris ingress at the end of the run. Simple, secure fit for fast installation.
-
Vincent Buda & Company 125mm W x 80mm D Box Grate Joiner – Galvanised Steel
125mm W x 80mm D galvanised steel box grate joiner for aligning and joining modular box grate sections. Provides strong, accurate connections that maintain channel width and depth across straight runs. Corrosion resistant for outdoor use in pavements and hardstands. Sized to suit 125mm x 80mm systems for seamless integration and quick installation by contractors.
-
Vincent Buda & Company 125mm W x 80mm D Box Grate Outlet – Galvanised Steel
125mm W x 80mm D galvanised steel box grate outlet for connecting modular box grates to stormwater plumbing. Tough, corrosion-resistant construction suits external pavements, driveways and commercial hardstands. Sized to suit 125mm x 80mm systems, it integrates cleanly with matching channels and grates. Provides a reliable discharge point to pipework and is installer friendly for rapid set-out and installation.
-
Vincent Buda & Company 125mm x 75mm RHS Stormwater Adaptor – Rectangular Section
RHS stormwater adaptor to suit 125mm x 75mm rectangular hollow section. Transitions from rectangular channels to compatible fittings or pipes, simplifying drainage connections. Durable construction for site use and long service life. Ideal for driveway, garden and civil drainage applications. Fast installation with sealant and fixings to achieve a secure, watertight interface.
-
Vincent Buda & Company 125mm x 80mm 90° Joiner – Suits Galvanised Box Grate
125mm x 80mm 90° joiner designed to suit galvanised box grates, enabling neat corner transitions in drainage runs. Heavy‑duty construction aligns channels securely for reliable flow. Simple to install during set‑out for patios, driveways and commercial paving. Provides a professional finish with consistent grate spacing and performance. A practical accessory for landscaping and civil drainage projects requiring durable, tidy junctions.
-
Vincent Buda & Company 140mm W x 125mm D End Cap – Stainless Steel
140mm W x 125mm D stainless steel end cap to finish linear grate and channel installations. Provides a clean, sealed termination while matching the grate finish. Corrosion resistant for bathrooms, balconies and outdoor areas. Sized to suit 140mm x 125mm channels for a neat, professional result and quick installation with reliable long-term durability.
-
Reo Build 150mm Channel Drain Connector – Joiner
This 150mm channel drain connector (joiner) links 150mm channel sections for continuous runs. It ensures alignment and watertight joining when extending drainage lines along driveways, patios, and pathways. Simple to install, it integrates with standard 150mm channels, grates, and stop ends. Use multiple joiners to create long, uninterrupted drainage runs and improve stormwater management around residential hardscapes and building thresholds.
-
Reo Build 150mm Channel Drain Stop End – End Cap
This 150mm channel drain stop end (end cap) seals the end of 150mm channel runs to prevent water bypass and ensure proper system flow. Use on new installations or maintenance upgrades to finish channels neatly. Simple to fit and compatible with standard 150mm components, it supports reliable drainage performance. Combine with matched grates, channels, and connectors to complete your system and reduce surface water pooling around driveways and pathways.
-
Reo Build 150mm Grate Outlet – Stormwater Drainage Fitting
The 150mm grate outlet provides a reliable connection between stormwater pits, channels and downstream pipework. It streamlines installation and helps maintain consistent flow, reducing blockages around pit entries. Suited to residential, commercial and civil drainage upgrades or repairs, it enables quick replacement of worn outlets during maintenance. Durable construction supports long service under traffic and weather. Use as part of an integrated stormwater system for efficient surface water capture and discharge.
-
Vincent Buda & Company 150mm W x 125mm D Box Grate End Cap – Galvanised Steel
150mm W x 125mm D galvanised steel box grate end cap to neatly close off channel runs and contain concrete pours. Durable, corrosion-resistant steel suits external pavements and hardstand areas. Sized to suit 150mm x 125mm systems, it delivers a clean termination point while preventing debris ingress at the end of the run. Simple, secure fit for fast installation.
-
Vincent Buda & Company 150mm W x 125mm D Box Grate Joiner – Galvanised Steel
150mm W x 125mm D galvanised steel box grate joiner for aligning and joining modular box grate sections. Provides strong, accurate connections that maintain channel width and depth across straight runs. Corrosion resistant for outdoor use in pavements and hardstands. Sized to suit 150mm x 125mm systems for seamless integration and quick installation by contractors.
-
Vincent Buda & Company 150mm W x 125mm D Box Grate Outlet – Galvanised Steel
150mm W x 125mm D galvanised steel box grate outlet for connecting modular box grates to stormwater plumbing. Tough, corrosion-resistant construction suits external pavements, driveways and commercial hardstands. Sized to suit 150mm x 125mm systems, it integrates cleanly with matching channels and grates. Provides a reliable discharge point to pipework and is installer friendly for rapid set-out and installation.
-
Vincent Buda & Company 150mm x 100mm RHS Stormwater Adaptor – Rectangular Section
RHS stormwater adaptor to suit 150mm x 100mm rectangular hollow section. Transitions from rectangular channels to compatible fittings or pipes, simplifying drainage connections. Durable construction for site use and long service life. Ideal for driveway, garden and civil drainage applications. Fast installation with sealant and fixings to achieve a secure, watertight interface.
-
Vincent Buda & Company 150mm x 100mm RHS Stormwater Kerb Outlet – 50mm Kerb Height
150mm x 100mm RHS stormwater kerb drain outlet with 50mm kerb height. Designed to couple rectangular hollow section collectors to kerb discharge points. Provides a neat, durable transition for driveway, road and car park drainage. Robust construction for site use. Fit to RHS with welding or mechanical fastening and seal for leak-resistant performance.
-
Vincent Buda & Company 150mm x 100mm RHS Stormwater Kerb Outlet – 75mm Kerb Height
150mm x 100mm RHS stormwater kerb drain outlet with 75mm kerb height. Designed to couple rectangular hollow section collectors to kerb discharge points. Provides a neat, durable transition for driveway, road and car park drainage. Robust construction for site use. Fit to RHS with welding or mechanical fastening and seal for leak-resistant performance.
-
Vincent Buda & Company 150mm x 125mm 90° Joiner – Suits Galvanised Box Grate
150mm x 125mm 90° joiner designed to suit galvanised box grates for forming robust corner connections in linear drainage. Ensures accurate alignment and secure fixing for consistent hydraulic performance. Quick to position during installation across driveways, yards and commercial hardscapes. Delivers a clean, professional appearance with reliable service life. An essential accessory for complete, well‑finished drainage layouts.
-
Vincent Buda & Company 150mm x 50mm RHS Stormwater Adaptor – Rectangular Section
RHS stormwater adaptor to suit 150mm x 50mm rectangular hollow section. Transitions from rectangular channels to compatible fittings or pipes, simplifying drainage connections. Durable construction for site use and long service life. Ideal for driveway, garden and civil drainage applications. Fast installation with sealant and fixings to achieve a secure, watertight interface.
-
Vincent Buda & Company 200mm W x 170mm D Box Grate End Cap – Galvanised Steel
200mm W x 170mm D galvanised steel box grate end cap to neatly close off channel runs and contain concrete pours. Durable, corrosion-resistant steel suits external pavements and hardstand areas. Sized to suit 200mm x 170mm systems, it delivers a clean termination point while preventing debris ingress at the end of the run. Simple, secure fit for fast installation.
-
Vincent Buda & Company 200mm W x 170mm D Box Grate Joiner – Galvanised Steel
200mm W x 170mm D galvanised steel box grate joiner for aligning and joining modular box grate sections. Provides strong, accurate connections that maintain channel width and depth across straight runs. Corrosion resistant for outdoor use in pavements and hardstands. Sized to suit 200mm x 170mm systems for seamless integration and quick installation by contractors.
-
Vincent Buda & Company 200mm W x 170mm D Box Grate Outlet – Galvanised Steel
200mm W x 170mm D galvanised steel box grate outlet for connecting modular box grates to stormwater plumbing. Tough, corrosion-resistant construction suits external pavements, driveways and commercial hardstands. Sized to suit 200mm x 170mm systems, it integrates cleanly with matching channels and grates. Provides a reliable discharge point to pipework and is installer friendly for rapid set-out and installation.
-
Vincent Buda & Company 200mm W x 170mm D End Cap – Stainless Steel
200mm W x 170mm D stainless steel end cap to finish linear grate and channel installations. Provides a clean, sealed termination while matching the grate finish. Corrosion resistant for bathrooms, balconies and outdoor areas. Sized to suit 200mm x 170mm channels for a neat, professional result and quick installation with reliable long-term durability.
-
Vincent Buda & Company 200mm x 100mm RHS Stormwater Adaptor – Rectangular Section
RHS stormwater adaptor to suit 200mm x 100mm rectangular hollow section. Transitions from rectangular channels to compatible fittings or pipes, simplifying drainage connections. Durable construction for site use and long service life. Ideal for driveway, garden and civil drainage applications. Fast installation with sealant and fixings to achieve a secure, watertight interface.
-
Vincent Buda & Company 200mm x 100mm RHS Stormwater Kerb Outlet – 50mm Kerb Height
200mm x 100mm RHS stormwater kerb drain outlet with 50mm kerb height. Designed to couple rectangular hollow section collectors to kerb discharge points. Provides a neat, durable transition for driveway, road and car park drainage. Robust construction for site use. Fit to RHS with welding or mechanical fastening and seal for leak-resistant performance.
-
Vincent Buda & Company 200mm x 100mm RHS Stormwater Kerb Outlet – 75mm Kerb Height
200mm x 100mm RHS stormwater kerb drain outlet with 75mm kerb height. Designed to couple rectangular hollow section collectors to kerb discharge points. Provides a neat, durable transition for driveway, road and car park drainage. Robust construction for site use. Fit to RHS with welding or mechanical fastening and seal for leak-resistant performance.
-
Vincent Buda & Company 200mm x 170mm 90° Joiner – Suits Galvanised Box Grate
200mm x 170mm 90° joiner to suit galvanised box grates, creating strong, accurate corner transitions in high‑capacity drainage lines. Built for durability and easy alignment to maintain flow characteristics. Ideal for commercial pavements, loading areas and landscaped hardstands. Simplifies set‑out and provides a neat, consistent finish across drainage networks. A dependable component for robust installations.
-
Reo Build 230mm Channel Drain Connector – Joiner
This 230mm channel drain connector (joiner) couples 230mm channel sections to form continuous, watertight drainage runs. Ideal for extending systems across driveways and courtyards, it aligns channels accurately for dependable flow. Compatible with standard 230mm components, it installs quickly and supports straightforward maintenance. Combine with grates and stop ends to complete high-capacity residential drainage solutions that reduce surface pooling and protect paving.
-
Reo Build 230mm Channel Drain Stop End – End Cap
This 230mm channel drain stop end (end cap) neatly terminates 230mm channel runs to prevent leakage and direct water through the system. It’s easy to install and integrates with standard 230mm channel components. Use for new builds or upgrades to complete drainage lines along driveways, patios, and slab edges. Pair with matching grates and connectors to ensure consistent performance and minimise surface ponding in residential applications.
-
Reo Build 230mm Grate Outlet – Stormwater Drainage Fitting
This 230mm grate outlet connects drainage pits or channels to matching stormwater pipe, promoting efficient water transfer and reducing debris catch points. Ideal for larger areas such as car parks, industrial yards and landscaped zones, it supports high inflow rates and dependable service. Use it for new works or replacement of damaged outlets during maintenance. Robust, site-ready construction delivers quick install times and long-term performance in demanding outdoor environments.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 110mm Orifice – Without Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 110mm central orifice for reliable flow control in stormwater, drainage, and hydraulics. Corrosion-resistant construction suits outdoor installations. Supplied without Dynabolts so you can select fixings to suit the substrate and specification. Precision-cut and consistently sized to support predictable discharge rates. Suitable for mounting to pits, headwalls, or chambers in civil works and maintenance projects. Durable and low-maintenance for long-term service.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 115mm Orifice – With Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 115mm central orifice for dependable flow control in stormwater, drainage, and hydraulic applications. Corrosion-resistant construction suits harsh outdoor environments. Supplied with Dynabolts for fast mounting to pits, headwalls, or chambers, streamlining installation. Precision-cut and consistently sized to support predictable discharge rates. Ideal for councils, civil contractors, and facility maintenance where durable, low‑maintenance flow restriction is required across long service intervals.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 115mm Orifice – Without Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 115mm central orifice for reliable flow control in stormwater, drainage, and hydraulics. Corrosion-resistant construction suits outdoor installations. Supplied without Dynabolts, allowing you to choose fixings to suit the substrate and specification. Precision-cut and consistently sized to support predictable discharge rates. Suitable for mounting to pits, headwalls, or chambers in civil works and maintenance projects. Durable and low-maintenance for long-term performance in demanding environments.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 120mm Orifice – With Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 120mm central orifice for dependable flow control in stormwater, drainage, and hydraulic systems. Corrosion-resistant construction suits harsh outdoor environments. Supplied with Dynabolts for quick mounting to pits, headwalls, or chambers, saving installation time. Precision-cut and consistently sized to support predictable discharge rates. A durable, low‑maintenance solution ideal for councils, civil contractors, and facility maintenance teams overseeing flow restriction assets.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 120mm Orifice – Without Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 120mm central orifice for reliable flow control in stormwater, drainage, and hydraulics. Corrosion-resistant construction suits outdoor installations. Supplied without Dynabolts so you can select fixings to match the substrate and specification. Precision-cut and consistently sized to support predictable discharge rates. Suitable for mounting to pits, headwalls, or chambers in civil works and maintenance projects. Built for durability and low maintenance over a long service life.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 125mm Orifice – With Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 125mm central orifice for dependable flow control in stormwater, drainage, and hydraulic applications. Corrosion-resistant construction suits harsh outdoor environments. Supplied with Dynabolts for fast mounting to pits, headwalls, or chambers, reducing installation time. Precision-cut and consistently sized to support predictable discharge rates. Ideal for councils, civil contractors, and facility maintenance where durable, low‑maintenance flow restriction components are required.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 125mm Orifice – Without Dynabolts
Stainless steel orifice plate measuring 250mm x 250mm with a 125mm central orifice for reliable flow control in stormwater, drainage, and hydraulics. Corrosion-resistant construction suits outdoor installations. Supplied without Dynabolts so you can choose fixings to suit the substrate and specification. Precision-cut and consistently sized to support predictable discharge rates. Suitable for mounting to pits, headwalls, or chambers in civil works and maintenance projects. Durable and low-maintenance for long-term performance in demanding environments.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 30mm Hole – Plate Only (No Dynabolts)
Stainless steel orifice plate for regulating outflow in stormwater detention systems, pits and pipes. Measures 250mm x 250mm with a 30mm hole to achieve specified discharge rates. Plate only; dynabolts not included. Durable, corrosion-resistant construction with pre-drilled fixing points for straightforward installation. Suitable for projects requiring precise flow control to meet hydraulic design criteria and council approvals.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 30mm Hole – With Dynabolts
Stainless steel orifice plate for flow control in stormwater detention systems, pits and pipes. Size 250mm x 250mm with a 30mm hole to regulate discharge rates per hydraulic design. Supplied with dynabolts for secure mounting. Corrosion-resistant construction ensures long service life. Pre-drilled fixing points suit standard installations. Use to meet design specifications and council requirements for controlled outlet flows.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 35mm Hole – Plate Only (No Dynabolts)
Stainless steel orifice plate for controlled outflows in stormwater systems, sized 250mm x 250mm with a 35mm hole. Plate only; dynabolts not supplied. Built from corrosion-resistant stainless steel for durability in harsh conditions. Pre-drilled fixing points support straightforward installation. An essential component for meeting hydraulic design and council compliance on detention and flow-limiting applications.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 35mm Hole – With Dynabolts
A 250mm x 250mm stainless steel orifice plate designed to control outlet flow rates in detention tanks, pits and pipe systems. Features a 35mm hole to meet hydraulic design targets. Supplied with dynabolts for secure fixing. Corrosion-resistant for long life in wet environments. Pre-drilled for quick installation. Use where reliable, calibrated discharge is required to satisfy project and regulatory requirements.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 40mm Hole – Plate Only (No Dynabolts)
A corrosion-resistant stainless steel orifice plate for stormwater flow control, measuring 250mm x 250mm with a 40mm hole. Plate only; dynabolts are not included. Pre-drilled fixing points make installation straightforward. Use to regulate outlet flows in detention systems and pits in accordance with hydraulic designs and council requirements, ensuring consistent and predictable discharge performance.
-
Vincent Buda & Company 250mm x 250mm Stainless Steel Orifice Plate – 40mm Hole – With Dynabolts
This 250mm x 250mm stainless steel orifice plate features a 40mm hole for calibrated discharge control in detention pits and pipe outlets. Supplied with dynabolts for secure mounting. Stainless construction provides excellent corrosion resistance and longevity. Pre-drilled for quick installation. Suitable for civil and residential projects requiring precise outflow regulation to meet hydraulic performance and compliance criteria.
You have seen 48 out of 120 products
