Network Building Supplies
-
Network Building Supplies 1.83m x 100m Reinforced Polyethylene Sheeting Roll - POLYWEAVE
Polyweave reinforced sheeting in a 1.83m x 100m roll, engineered for tough site and agricultural use. The woven HDPE core with laminated coating provides excellent tear resistance, UV stability and weather durability. Perfect for temporary walls, screening, weather covers, and protection of materials and equipment. Lightweight yet strong, it’s easy to cut, fasten and reuse. A versatile solution for builders, landscapers and horticulture installations requiring reliable, long‑lasting coverage.Woven HDPE with laminated coating,Ideal for screens, walls and covers
$108.06
-
Network Building Supplies 10g x 38mm Laminating Screws – Pack of 500
These 10g x 38mm laminating screws are engineered for secure clamping of timber laminations, joinery, and cabinetry components. The sharp tip drives quickly with minimal splitting, while the deep thread provides excellent holding power. A countersunk head seats neatly below the surface, and the zinc plated finish offers corrosion resistance for indoor and sheltered use. Supplied in a trade pack of 500 for efficient workshop and site productivity.Deep thread for strong clamping in timber laminations,Countersunk head for a flush, clean finish
-
Network Building Supplies 150mm Wide Paper Tape
This 150mm wide masking paper tape provides quick, reliable coverage for edges and surfaces during painting and spraying. The paper profile is easy to cut and apply, helping protect trims, floors and fixtures from overspray and drips. Suitable for residential and commercial works, it removes cleanly on most surfaces when used as directed. A practical, time-saving addition to any painter’s kit.Wide format for fast coverage and edge protection,Ideal for painting, spraying and surface masking
-
Network Building Supplies 15kg Base Coat Jointing Compound - HARDIES
Polymer‑modified base coat formulated for bedding tapes and reinforcing joints on fibre cement render substrates and façade systems. Supplied in a 15 kg pack with smooth trowelability and strong bond to prepared sheets. Provides a stable foundation for subsequent topping coats or texture finishes. Suitable for exterior applications when used as part of a compatible system. Follow manufacturer guidelines for mixing, application, and curing for best results.High‑build base for reinforced joints,Excellent adhesion and workability
-
Network Building Supplies 15kg Topping Coat Jointing Compound - HARDIES
Ready‑to‑use topping compound designed to provide a smooth, sandable finish over fibre cement joints and patched areas. Supplied in a 15 kg pack, it levels minor imperfections and prepares surfaces for painting or texture coatings. Low shrinkage formulation helps resist cracking and improves finish quality. Apply over cured base coats and follow system specifications for exterior performance and durability.Smooth finish coat for joints and edges,Low shrinkage, easy sanding for paint readiness
-
Network Building Supplies 20kg Masonry Adhesive – High Strength
Professional 20 kg masonry adhesive designed for bonding masonry units, AAC panels and bricks in thin‑bed applications. Polymer‑modified for excellent adhesion, workability and reduced slump, it delivers high early strength to speed progress on site. Mixes easily with water to a smooth, trowelable consistency and offers extended open time for accurate placement. Ideal for internal and external walls where a clean, consistent joint is required. Apply on clean, sound substrates following manufacturer spread rates and curing guidelines.High early strength for rapid installation,Suitable for AAC panels, blocks and bricks
-
Network Building Supplies 20kg Topping Coat Joint Compound - JOINTMASTER
Ready-mixed topping compound in a 20kg pail for final finishing of plasterboard joints and patches. Delivers a smooth, easy-to-sand surface with low shrinkage, ideal for third coats and touch-ups. Excellent workability to achieve feathered edges and consistent coverage, helping reduce sanding and speed up finishing. Suitable for residential and commercial interiors prior to priming and painting.Smooth finish coat for final plasterboard joints,Easy sanding with low shrinkage
-
Network Building Supplies 2400 x 1200 x 12mm Non-Structural Plywood Sheet
12mm non-structural radiata pine plywood for interior applications such as cabinetry carcasses, shelving, underlayment and general fitout. Smooth, sanded faces are easy to finish or laminate. Stable, uniform construction for consistent machining and fast fixing with screws or nails. Not suitable for structural use or prolonged wet conditions. A cost-effective, dependable panel where a neat appearance and ease of use are essential.Versatile interior panel for fitouts and joinery,Sanded faces for clean finishes and easy handling
-
Network Building Supplies 2400 x 1200 x 18mm Non-Structural Plywood Sheet
18mm non-structural radiata pine plywood designed for interior joinery, shelving, benchtop substrates and general fitout. Provides a strong, stable panel with excellent machinability for routing, drilling and edge finishing. Sanded faces accept paint, laminate or veneer. Fix with screws or nails as required. Not intended for structural applications or persistent moisture exposure. A versatile, worksite-friendly sheet for quality interior projects.Thick interior panel for shelving and benchtop substrates,Sanded finish for clean, consistent results
-
Network Building Supplies 2400 x 1200 x 9mm Non-Structural Plywood Sheet
9mm non-structural radiata pine plywood suitable for interior linings, utility panels, boxing and craft projects. Offers stable, uniform construction with sanded face veneers for clean finishing. Easy to cut, drill and fasten with standard tools. Not intended for structural or external exposure. A practical, cost-effective sheet for everyday fitout and fabrication tasks.Economical interior panel for general utility use,Sanded face for neat finishes and easy fixing
-
Network Building Supplies 2700 x 25mm MDF Stop End – Suits 64mm Stud
This 2700 x 25mm MDF stop end suits 64mm stud walls, providing a clean termination at wall ends and openings. The smooth MDF face is easy to set and paint for a professional finish. Designed for straightforward installation, it helps achieve consistent, crisp edges along corridors, nibs and reveals. Ideal for residential and commercial interiors where a neat, durable edge detail is required to complete plasterboard wall systems.Neat wall termination for 64mm stud framing,Smooth MDF face ready to set and paint
-
Network Building Supplies 2700 x 25mm MDF Stop End – Suits 76mm Stud
This 2700 x 25mm MDF stop end suits 76mm stud framing, creating a neat, durable termination for plasterboard walls. The stable MDF profile is easy to set and paint, producing a clean architectural edge at ends, reveals and openings. Simple to cut and fix, it supports consistent detailing across residential and commercial interiors, helping deliver professional finishes with minimal fuss.Crisp termination detail for 76mm stud walls,Ready-to-finish MDF for set and paint systems
-
Network Building Supplies 2700 x 25mm MDF Stop End – Suits 92mm Stud
This 2700 x 25mm MDF stop end suits 92mm stud walls, delivering a clean edge detail where partitions terminate. The smooth MDF surface is ready for setting and painting, ensuring a crisp, professional finish at reveals and wall ends. Quick to cut and fix, it supports consistent, tidy detailing on residential and commercial projects, improving build efficiency and finish quality.Neat finishing edge for 92mm stud partitions,Smooth, paint-ready MDF profile
-
Network Building Supplies 28mm Furring Channel – 3000mm Length - RONDO
A 28mm galvanised steel furring channel in a 3000mm length for wall and ceiling lining systems. Designed for straightness and stability, it supports plasterboard and other linings while maintaining consistent spacing and alignment. The zinc coating provides corrosion resistance in typical interior environments. Compatible with standard clips, hangers and fasteners, it enables fast, professional installation in residential and commercial applications where a reliable batten system is required.28mm profile for lining support,3.0m length for efficient spans,Galvanised for corrosion resistance,Straight, stable and easy to fix,Compatible with clips and hangers
-
Network Building Supplies 28mm Furring Channel – 3600mm Length - RONDO
A 28mm galvanised steel furring channel in a 3600mm length, ideal for minimising joints and speeding up installation. It provides strong, straight support for plasterboard and other linings in walls and ceilings. The zinc coating offers corrosion resistance, while the consistent profile ensures reliable engagement with standard clips, hangers and fasteners. Suitable for residential and commercial framing where quality alignment and efficient coverage are required.28mm profile for lining support,3.6m length reduces joints,Galvanised for corrosion resistance,True, straight spans for neat finishes,Works with standard clips and hangers
-
Network Building Supplies 3000mm x 76mm Steel Wall Stud 0.55 BMT - RONDO
Durable cold-formed 76mm steel stud in 0.55 BMT for internal wall framing. The galvanised finish resists corrosion in dry internal environments and provides reliable screw holding for plasterboard linings. Straight and true sections help achieve quality finishes and consistent wall performance. Ideal for light commercial and residential partitions, door framing, and services cavities. Suits standard 76mm track systems and can be trimmed to length on site. Fast to install, light to handle, and AS/NZS compliant for peace of mind.0.55 BMT galvanised steel for rigid, corrosion-resistant framing,Compatible with 76mm track systems for internal partitions
-
Network Building Supplies 3000mm x 76mm Steel Wall Track 0.50 BMT - RONDO
Galvanised 76mm wall track in 0.50 BMT for locating studs at floor and ceiling lines. Provides a straight, corrosion-resistant base for internal partitions and bulkheads. Easy to cut, drill and fix, with a clean profile for rapid installation. Suitable for residential and commercial fitouts using plasterboard linings. Use with compatible 76mm steel studs for a complete framing system. Reliable performance, consistent dimensions, and light handling make it a site-friendly choice for speed and accuracy.0.50 BMT galvanised track for floor and ceiling runners,Pairs with 76mm studs for internal partitions
-
Network Building Supplies 3000mm x 92mm Deflection Head Track 0.70 BMT - RONDO
Engineered 92mm deflection head track in 0.70 BMT for accommodating vertical movement at the head of partitions. Designed for use under concrete slabs or roof structures to manage building deflection and reduce cracking at plasterboard joints. The heavy-gauge galvanised section delivers strength and durability while maintaining fast installation. Ideal for commercial fitouts and projects requiring movement joints. Use with 92mm studs and appropriate head detail to achieve compliant, high-quality wall systems.Allows vertical deflection between slab and partition,0.70 BMT galvanised for added rigidity and strength
-
Network Building Supplies 3000mm x 92mm Steel Wall Stud 0.55 BMT - RONDO
Heavy-duty 92mm steel stud in 0.55 BMT, designed for higher walls, service risers and acoustic partitions. The galvanised coating offers corrosion resistance and reliable screw pull-out performance for plasterboard systems. Straight, stable sections help achieve flat finishes and efficient installation. Suitable for commercial fitouts, corridors, and residential feature walls where extra cavity space is needed. Cut to length on site and pair with compatible 92mm track for a complete, fast, and dependable framing solution.0.55 BMT galvanised for stronger, taller partitions,Ideal for services walls and acoustic build-ups
-
Network Building Supplies 3000mm x 92mm Steel Wall Track 0.50 BMT - RONDO
Galvanised 92mm wall track in 0.50 BMT for floor and ceiling runners in larger partitions. Provides a stable base for 92mm studs, supporting commercial and residential framing where extra cavity or height is required. The corrosion-resistant finish and consistent dimensions simplify installation and improve finish quality. Easy to cut and fix, suitable for corridors, service walls, and acoustic systems. Use with compatible 92mm studs to complete a robust and efficient metal wall frame.0.50 BMT galvanised track for 92mm stud walls,Straight, clean profile for fast installation
-
Network Building Supplies 30mm Galvanised Clouts – 2.5kg
These 30mm galvanised clout nails come in a 2.5kg trade pack, ideal for roofing felt, sheet materials, and general fixing where a larger head is required. The hot-dipped galvanised finish provides reliable corrosion resistance in outdoor and coastal environments. With a wide flat head and sharp point, they drive cleanly and hold securely in timber substrates. A dependable choice for roofing, fencing, and general construction tasks.Hot-dipped galvanised for corrosion resistance,Wide flat head for securing roofing and sheet materials
-
Network Building Supplies 30mm Ring Shank Nails – 2.5kg Pack
These 30 mm ring shank nails offer exceptional holding power in timber thanks to their annular rings, making them ideal for cladding, fencing, subfloors and general construction. The galvanised finish provides corrosion resistance for outdoor and damp environments. Supplied in a 2.5 kg trade pack for efficient site use and reduced downtime. AS/NZS compliant for consistent quality and dependable performance across a range of fixing tasks.Ringed shank for superior pull-out resistance,Galvanised for exterior applications
$137.50
-
Network Building Supplies 355mm Cut-Off Wheel – Metal Cutting (Each) – MAKITA
This 355mm metal cut-off wheel is a reinforced abrasive disc designed for fast, clean cutting of steel and other ferrous metals. The durable bond and reinforcement provide stability and long service life in demanding workshop conditions. Ideal for fabrication, site cutting and general metalwork on stationary cut-off saws. Delivers consistent performance, helping achieve accurate, burr-minimised cuts for efficient downstream processing and assembly.Reinforced abrasive disc for fast, clean metal cuts,Suitable for stationary 355mm cut-off saws
-
Network Building Supplies 40mm Galvanised Clouts – 2.5kg
These 40mm galvanised clout nails are supplied in a 2.5kg trade pack for efficient site use. The hot-dipped galvanised coating offers strong corrosion resistance, making them suitable for exterior applications. A broad flat head delivers excellent holding power on roofing membranes and sheet goods, while a sharp point ensures consistent penetration into timber. Ideal for roofing, fencing, and general light construction work.Hot-dipped galvanised for corrosion resistance,Wide flat head for securing roofing and sheet materials
-
Network Building Supplies 50 mm Acoustic Partition Batts – 14 kg Density, R1.3, 1200 x 600 mm, 22 Pack, 15.84 m² - ECOWOOL
Acoustic glasswool batts, 50 mm thick with R1.3 thermal rating, sized 1200 x 600 mm. The 22 pack covers 15.84 m², suitable for partition walls where reduced thickness is required. The 14 kg/m³ density aids sound control between rooms while improving thermal comfort. Easy to cut and friction‑fit into timber or steel studs. Non‑combustible and stable for long‑term performance. Install snugly without gaps for best results.22 pieces cover 15.84 m² of wall area,14 kg/m³ density for acoustic improvement
-
Network Building Supplies 50mm Galvanised Clouts – 2.5kg
These 50mm galvanised clout nails provide extra length for thicker sheet materials and timber overlays. Packaged in a 2.5kg trade pack, they feature a hot-dipped galvanised finish for reliable corrosion protection in outdoor applications. The wide flat head improves holding strength on roofing and sheeting, and the sharp point ensures clean, consistent penetration. Suitable for roofing, cladding, fencing, and general construction.Hot-dipped galvanised for corrosion resistance,Wide flat head for securing roofing and sheet materials
-
Network Building Supplies 6.5 x 25mm Nylon Mushroom Head Anchor – Pack of 100
These 6.5mm x 25mm nylon mushroom head anchors provide reliable light-duty fixing in brick, block and masonry. The mushroom head offers a neat, low-profile finish that spreads load and helps prevent pull-through on thin materials. Ideal for securing clips, brackets, battens and light fixtures. Supplied in a trade pack of 100 for efficient site use. Use with a correctly sized pre-drilled hole and compatible screws for best performance. Non-corroding nylon suits indoor and sheltered outdoor applications.Low-profile mushroom head for a neat, flush finish,Durable nylon for light-duty masonry and brick fixings
-
Network Building Supplies 6.5 x 32mm Metal Pin Anchors – Pack of 100
These 6.5 x 32mm metal pin anchors provide a quick hammer-in fixing for light-duty anchoring into concrete, brick and block. Zinc plating offers corrosion resistance for longer service life. Ideal for fixing clips, brackets and trims where fast installation matters. Supplied in a pack of 100 for efficient site use. Suitable for use with appropriately sized drill bits and setting tools.Fast, hammer-in fixing for masonry substrates,Zinc plated for corrosion resistance
-
Network Building Supplies 6.5 x 40mm Metal Pin Anchors – Pack of 100
These 6.5 x 40mm metal pin anchors are designed for quick, reliable fixing into concrete, brick and block. The hammer-in design speeds installation for brackets, clips and light hardware. Zinc plating helps resist corrosion, supporting longer-term performance. Supplied in packs of 100 for productivity on site. Use with the correct drill size and follow substrate preparation guidelines for best results.Rapid hammer-in installation to masonry,Corrosion-resistant zinc plating
-
Network Building Supplies 6.5 x 40mm Nylon Mushroom Head Anchor – Pack of 100
These 6.5mm x 40mm nylon mushroom head anchors are a versatile choice for light-duty fixings into masonry substrates. The tough nylon body resists corrosion, while the mushroom head provides a neat finish and a broad bearing surface for fixtures. Suitable for mounting clips, conduit saddles, trim and light brackets. Supplied in a pack of 100 to cover medium-sized installs. Drill a correctly sized pilot hole and use appropriate screws for best holding strength.Mushroom head spreads load and reduces pull-through,Ideal for light fixings in brick, block and masonry
-
Network Building Supplies 6.5 x 50mm Green Nylon Wall Plugs – Pack of 50
Green nylon wall plugs sized 6.5 x 50 mm, supplied in a pack of 50 for efficient site use. The ribbed body and split expansion design provide secure anchoring in masonry, brick and concrete when used with appropriate screws. Ideal for light to medium duty fixings including battens, brackets and conduits. Durable nylon construction resists cracking and creep. Use with the recommended drill size and clean holes for best results.Ribbed expansion design for strong hold,Suitable for masonry, brick and block
-
Network Building Supplies 6.5 x 50mm Nylon Mushroom Head Anchor – Pack of 100
Get extra hold where depth matters with 6.5mm x 50mm nylon mushroom head anchors. The extended length provides deeper embedment in masonry and block, improving pull-out resistance on light-duty applications. Mushroom head design offers a low-profile finish and increased bearing surface for fixtures. Ideal for battens, clips and light brackets. Trade pack of 100 keeps you stocked for site work. Drill pilot holes to suit and use compatible screws for consistent performance.Longer 50mm length for deeper embedment,Non-corroding nylon for reliable light-duty anchoring
-
Network Building Supplies 6.5 x 75mm Nylon Mushroom Head Anchor – Pack of 100
For deeper masonry fixings, choose 6.5mm x 75mm nylon mushroom head anchors. The extended length helps increase embedment and holding power in brick and block for light-duty applications. Mushroom head design provides a neat, low-profile appearance with a generous bearing surface. Ideal for battening, trims and light brackets. Supplied in a trade pack of 100 to keep projects moving. Drill correct pilot holes and pair with compatible screws for consistent performance.Extra length for improved embedment in deeper substrates,Nylon construction resists corrosion in light-duty use
-
Network Building Supplies 6.5mm x 50mm Metal Pin Anchors – Pack of 100
Reliable and quick to install, these 6.5mm x 50mm metal pin anchors are ideal for fixing brackets, clips, and light fixtures into concrete, brick, or block. The hammer-set design ensures fast expansion and firm hold without the need for complex tools. Zinc plated steel construction offers durable corrosion resistance for indoor and sheltered outdoor applications. Supplied in a pack of 100 to keep jobs moving on site, these anchors are a dependable choice for trades needing consistent performance.Hammer-set expansion anchor for concrete and masonry,Zinc plated steel for corrosion resistance and secure fastening
-
Network Building Supplies 64mm Deflection Head Track – 0.70 BMT, 3000mm Length - RONDO
A 64mm galvanised steel deflection head track in 3000mm length, manufactured in 0.70 BMT for increased rigidity. Designed to accommodate vertical movement at the slab while maintaining wall alignment, it is ideal for commercial partitions and high-performance wall systems. The zinc coating resists corrosion in internal environments, and the precise profile ensures compatibility with matching studs. A reliable solution for projects demanding movement joints and durable framing performance.64mm wide deflection head track,0.70 BMT for added rigidity,Allows vertical slab movement,Galvanised for corrosion resistance,Ideal for commercial partitions
-
Network Building Supplies 64mm Steel Stud – 0.55 BMT, 3000mm Length - RONDO
A 64mm galvanised steel wall stud in 3000mm length, roll-formed in 0.55 BMT for strength and reliability. Ideal for internal partitions and linings, it delivers consistent straightness and fast fixing with compatible tracks and accessories. The zinc coating provides corrosion resistance for typical interior applications. Suitable for residential and commercial projects requiring accurate framing components that support high-quality plasterboard finishes and efficient installation.64mm stud in 0.55 BMT,3.0m length for standard walls,Galvanised corrosion resistance,Precise roll-formed profile,Compatible with 64mm tracks
-
Network Building Supplies 64mm Steel Track – 0.50 BMT, 3000mm Length - RONDO
A 64mm galvanised steel wall track in 3000mm length, manufactured in 0.50 BMT for dependable performance in internal framing. Used in conjunction with 64mm studs, it provides a straight and stable base and head member for partitions and linings. The zinc coating resists corrosion in typical interior conditions. With a consistent, accurate profile, it supports fast, professional installation and high-quality plasterboard finishes on residential and commercial projects.64mm track in 0.50 BMT,3.0m length for standard layouts,Galvanised for corrosion resistance,Accurate roll-formed profile,Pairs with 64mm studs
-
Network Building Supplies 75 mm Acoustic Partition Batts – 14 kg Density, R1.9, 1200 x 450 mm, 15 Pack, 8.1 m² - ECOWOOL
Acoustic glasswool batts, 75 mm thick with R1.9 thermal rating, sized 1200 x 450 mm. Pack of 15 covers 8.1 m². The higher 14 kg/m³ density enhances noise reduction between rooms and offices while boosting energy efficiency. Suitable for timber or steel stud partitions in residential and commercial projects. Batts are easy to cut and friction‑fit for a tight install. Non‑combustible and low irritant for safer handling.Higher 14 kg/m³ density improves sound control,15 pieces cover 8.1 m²
-
Network Building Supplies 75 mm Acoustic Partition Batts – 14 kg Density, R1.9, 1200 x 600 mm, 15 Pack, 10.8 m² - ECOWOOL
These 75 mm acoustic glasswool batts offer an R1.9 thermal rating and are sized 1200 x 600 mm. Supplied in a 15 pack to cover 10.8 m², they feature a 14 kg/m³ density to improve sound control across partitions and internal walls. Designed for timber and steel stud framing, batts are easy to cut and friction‑fit for a snug finish. Non‑combustible and dimensionally stable for long‑term performance.14 kg/m³ density for superior acoustic performance,15 pieces cover 10.8 m²
-
Network Building Supplies 75mm Wide Paper Tape
This 75mm masking paper tape is ideal for protecting trims, frames and edges during painting and spraying. It offers reliable coverage and clean lines while helping reduce overspray on delicate surfaces. Simple to apply and remove, it supports efficient workflows across residential repaints, fit-outs and maintenance projects. A practical size for everyday masking tasks.Versatile width for trims, frames and edges,Clean removal when used as directed
-
Network Building Supplies 76mm Deflection Head Track – 0.70 BMT, 3000mm Length - RONDO
A 76mm galvanised steel deflection head track in 3000mm length, produced in 0.70 BMT for added stiffness and durability. It permits vertical deflection at the structure while keeping walls plumb and true, making it ideal for commercial partitions and high-performance wall systems. The zinc coating offers corrosion resistance, and the accurate profile ensures seamless integration with 76mm studs and standard framing accessories for efficient installation and reliable long-term performance.76mm wide head track for movement joints,0.70 BMT for high rigidity,Allows vertical slab deflection,Galvanised for interior durability,Compatible with 76mm studs
-
Network Building Supplies 90 mm Residential Insulation Batts – R2.0, 1160 x 430 mm, 21 Pack, 10.47 m² - ECOWOOL
Residential glasswool insulation batts, 90 mm thick with R2.0 thermal rating, sized 1160 x 430 mm. A 21 pack covers 10.47 m², suitable for walls and ceilings in timber framing. Batts are easy to cut and friction‑fit, providing consistent coverage and improved energy performance. Non‑combustible, low irritant and dimensionally stable. Install snugly between studs or joists without compression to maintain the stated R‑value.21 pieces cover 10.47 m² of framing,R2.0 thermal rating for energy efficiency
-
Network Building Supplies 90mm R2.0 Residential Insulation Batts 1160 x 580mm (Pack 21) - 14.13m² - ECOWOOL
These 90mm R2.0 glasswool batts provide reliable thermal performance for residential walls and ceilings. Batts measure 1160 x 580mm to fit 600mm stud centres, ensuring a snug friction fit that reduces gaps and thermal bridging. Supplied unfaced for straightforward cutting and placement. The pack includes 21 batts with a total coverage of approximately 14.13 m2. Non‑combustible, low itch, and ideal for new builds and retrofits aiming to improve comfort and reduce heating and cooling costs.Energy-saving thermal insulation for walls and ceilings,Sized for 600mm centres; easy friction-fit installation
-
Network Building Supplies 90mm R2.5 HD Residential Insulation Batts 1160 x 430mm (Pack 11) - 5.49m² - ECOWOOL
High‑density 90mm R2.5 glasswool batts deliver excellent thermal and acoustic performance for walls and ceilings. Sized 1160 x 430mm to friction‑fit standard stud spacing, these unfaced batts are easy to cut, handle and install. The pack includes 11 batts, covering approximately 5.49 m2. Non‑combustible and low itch, they help reduce energy use and improve comfort in residential builds and renovations. Ideal for acoustic upgrades, with consistent thickness for a snug fit and minimal gaps.High-density thermal and acoustic performance for external walls and ceilings,Friction-fit for 430mm stud bays; non-combustible and low itch
-
Network Building Supplies 90mm R2.5 HD Residential Insulation Batts 1160 x 580mm (Pack 11) - 7.4m² - ECOWOOL
Upgrade wall and ceiling performance with 90mm R2.5 high‑density glasswool batts. Each batt is 1160 x 580mm for a snug friction fit in 600mm stud bays, reducing noise transmission and improving thermal comfort. The unfaced, low‑itch batts are simple to trim and handle. This pack contains 11 batts with total coverage of approximately 7.40 m2. Suitable for new builds and renovations where higher R‑value and acoustic performance are required without increasing wall thickness.High-density thermal and acoustic control for 600mm centres,Unfaced, non-combustible; easy to cut and install
-
Network Building Supplies Each Safety Glasses - Texas Clear Lens - MAXISAFE
Comfortable, lightweight safety glasses with clear wraparound polycarbonate lenses for unobstructed vision on site. The impact-resistant lens resists scratches and features anti-fog properties for reliable clarity in changing conditions. A contoured frame and soft nose bridge improve all-day wearability for trades and workshop use. Suitable for cutting, grinding, assembly and general eye protection tasks while maintaining visibility and fit with other PPE. Supplied individually for convenient replacement and compliance.Lightweight wraparound design with UV protection,Anti-scratch, anti-fog clear polycarbonate lens
-
Network Building Supplies Furring Channel Direct Fix Anchor to Concrete - RONDO
A compact, galvanised anchor designed to fix furring channel directly to concrete or masonry substrates. Ideal for battening walls prior to plasterboard lining, particularly where minimal build-down is required. Provides a secure, reliable fixing point that speeds up installation and reduces the need for additional brackets. Suits common furring channel profiles used in residential and commercial lining systems. Light to handle, easy to install, and engineered for consistent performance and long-term stability.Direct-to-concrete fixing for furring channels,Galvanised for corrosion resistance and durability
-
Network Building Supplies No. 139 Locking Clip – Furring Channel, Each - RONDO
A galvanised steel locking clip designed to retain 28mm furring channel securely in wall and ceiling systems. It offers quick snap-in installation, maintaining alignment and structural integrity during lining. The zinc coating resists corrosion in typical interior environments. Ideal for plasterboard framing where reliable engagement and ease of use are critical, this clip supports efficient, consistent installation across residential and commercial projects. Sold individually so you can order exactly what the job requires.Secures 28mm furring channel in place,Galvanised steel for corrosion resistance,Quick snap-in installation,Maintains alignment on walls and ceilings,Sold individually for precise quantities
You have seen 96 out of 157 products
App now.
