PLASTERING HARDWARE
-
Network Building Supplies 6.5mm x 40mm Nylon Mushroom Head Anchors – Pack of 100
These 6.5mm x 40mm nylon mushroom head anchors are a versatile choice for light-duty fixings into masonry substrates. The tough nylon body resists corrosion, while the mushroom head provides a neat finish and a broad bearing surface for fixtures. Suitable for mounting clips, conduit saddles, trim and light brackets. Supplied in a pack of 100 to cover medium-sized installs. Drill a correctly sized pilot hole and use appropriate screws for best holding strength.Mushroom head spreads load and reduces pull-through,Ideal for light fixings in brick, block and masonry
-
Network Building Supplies 6.5mm x 50mm Metal Pin Anchors – Zinc Plated Steel, Pack of 100
Reliable and quick to install, these 6.5mm x 50mm metal pin anchors are ideal for fixing brackets, clips, and light fixtures into concrete, brick, or block. The hammer-set design ensures fast expansion and firm hold without the need for complex tools. Zinc plated steel construction offers durable corrosion resistance for indoor and sheltered outdoor applications. Supplied in a pack of 100 to keep jobs moving on site, these anchors are a dependable choice for trades needing consistent performance.Hammer-set expansion anchor for concrete and masonry,Zinc plated steel for corrosion resistance and secure fastening
-
Network Building Supplies 6.5mm x 50mm Nylon Mushroom Head Anchors – Pack of 100
Get extra hold where depth matters with 6.5mm x 50mm nylon mushroom head anchors. The extended length provides deeper embedment in masonry and block, improving pull-out resistance on light-duty applications. Mushroom head design offers a low-profile finish and increased bearing surface for fixtures. Ideal for battens, clips and light brackets. Trade pack of 100 keeps you stocked for site work. Drill pilot holes to suit and use compatible screws for consistent performance.Longer 50mm length for deeper embedment,Non-corroding nylon for reliable light-duty anchoring
-
Network Building Supplies 6.5mm x 75mm Nylon Mushroom Head Anchors – Pack of 100
For deeper masonry fixings, choose 6.5mm x 75mm nylon mushroom head anchors. The extended length helps increase embedment and holding power in brick and block for light-duty applications. Mushroom head design provides a neat, low-profile appearance with a generous bearing surface. Ideal for battening, trims and light brackets. Supplied in a trade pack of 100 to keep projects moving. Drill correct pilot holes and pair with compatible screws for consistent performance.Extra length for improved embedment in deeper substrates,Nylon construction resists corrosion in light-duty use
-
Network Building Supplies 6g x 25mm Collated Drywall Screws – Coarse Thread PH2 – 1000 Pack
These 6g x 25mm collated drywall screws feature a coarse thread for quick engagement in timber studs and sheet materials. The bugle head seats cleanly without tearing paper, while the PH2 drive provides positive bit engagement. Black phosphate finish improves driveability and reduces cam‑out. Supplied in 1000‑screw strips for efficient use with auto‑feed screw guns, speeding installation on walls and ceilings. Ideal for plasterboard fixing and general interior fit‑out.Coarse thread for fast bite into timber studs,Collated strip for rapid screw gun installation
-
Network Building Supplies 6g x 25mm Collated Drywall Screws – D Point PH2 – 1000 Pack
Optimised for fast, clean starts, these 6g x 25mm collated drywall screws feature a sharp D point and bugle head to minimise surface damage. The PH2 drive maintains strong bit contact, while the black phosphate coating enhances driveability. Compatible with most collated screw guns for high‑productivity installation. Ideal for plasterboard to timber or light gauge steel where a sharp point is preferred. Supplied in a 1000 pack for efficient on‑site workflows.Sharp D point for quick start and reduced splitting,Bugle head for clean seating in plasterboard
-
Network Building Supplies 6g x 25mm Collated Drywall Screws – Fine Thread PH2 – 1000 Pack
Ideal for fixing plasterboard to light gauge steel studs, these 6g x 25mm collated screws feature a fine thread for controlled engagement and a clean finish. The bugle head seats neatly below the surface, and the PH2 drive offers reliable bit contact. Black phosphate coating assists with smooth driving and reduced cam‑out. Supplied in 1000‑piece collated strips compatible with most screw guns, making them perfect for fast, consistent interior fit‑out work.Fine thread for light gauge steel studs,Bugle head reduces paper tear on plasterboard
-
Network Building Supplies 6g x 32mm Collated Drywall Screws – Coarse Thread PH2 – 1000 Pack
These 6g x 32mm collated drywall screws provide extra reach for thicker boards and layered linings. Coarse thread design offers rapid bite in timber studs, while the bugle head seats flush without tearing the board face. PH2 drive and black phosphate finish deliver smooth, controlled driving with reduced cam‑out. Supplied in collated strips to suit auto‑feed screw guns, enabling faster wall and ceiling installation in high‑volume fit‑outs.Extended 32mm length for thicker linings,Coarse thread bites quickly into timber studs
-
Network Building Supplies 6g x 32mm Collated Drywall Screws – D Point PH2 – 1000 Pack
These 6g x 32mm collated drywall screws feature a sharp D point to penetrate quickly and start cleanly in board and timber or light gauge steel. The bugle head forms a neat recess, while the PH2 drive ensures positive engagement. Black phosphate finish assists smooth driving. Collated strips fit most auto‑feed screw guns for high productivity on larger projects. Ideal for thicker plasterboard, double layers, and ceiling work where extra length is required.Sharp D point for fast starts through board,Collated for speed with auto‑feed screw guns
-
Network Building Supplies 6g x 32mm Collated Drywall Screws – Fine Thread PH2 – 1000 Pack
These 6g x 32mm collated drywall screws are purpose made for fixing to light gauge steel studs where a fine thread is preferred. The bugle head delivers a smooth countersink in plasterboard, and the PH2 drive aids positive, controlled driving. Black phosphate finish supports reliable feed and reduced cam‑out. Packed in collated strips to suit auto‑feed screw guns, they boost installation speed on walls and ceilings in commercial and residential fit‑outs.Fine thread for steel stud fixing,32mm length suits thicker board and double layers
-
Network Building Supplies 6mm x 120mm Through Bolt Anchors – Zinc Plated Masonry Fixings, Box of 100
These 6mm x 120mm through bolt anchors provide dependable fixing into cracked or uncracked concrete and solid masonry. Zinc plated for corrosion resistance in interior environments, they feature a torque-controlled expansion design for consistent load performance. Supplied with hex nuts and washers for fast, straightforward installation. Ideal for brackets, channels and light structural connections in commercial and residential projects.Torque-controlled anchors for concrete and masonry,Hex nut and washer included for rapid install
-
Network Building Supplies 6mm x 150mm Through Bolt Anchors – Zinc Plated Masonry Fixings, Box of 100
A box of 100 through bolt anchors sized 6mm x 150mm for secure mounting in concrete and solid masonry. The torque-controlled expansion design delivers consistent holding power for fixtures, brackets and light structural supports. Zinc plated components resist corrosion in dry interior conditions. Supplied complete with nuts and washers for efficient installation on site.Reliable expansion anchors for solid substrates,Zinc plated finish for indoor applications
-
Network Building Supplies 6mm x 180mm Through Bolt Anchors – Zinc Plated Masonry Fixings, Box of 100
These 6mm x 180mm through bolt anchors are suited to deeper embedments and fixings where packers or thicker fixtures are used. The zinc plated finish supports corrosion resistance in interior environments, while the expansion sleeve delivers reliable holding strength in concrete and solid masonry. Packed 100 per box with nuts and washers for quick installation and consistent results.Longer length for deeper embedment or packers,Complete with hex nuts and washers
-
Network Building Supplies 6mm x 60mm Suspension Tie Wire Anchors – Zinc Plated, 6mm Hole, Box of 100
These 6mm x 60mm suspension tie wire anchors provide a secure point for hanging services such as cable trays, lights and ductwork. Featuring a 6mm hole and zinc plated finish, they are suited to interior environments and general building services. Supplied in a box of 100 for efficient site deployment, they streamline installation of suspended systems in commercial and residential projects.Creates secure suspension points for services,Zinc plated steel for indoor applications
-
Network Building Supplies 6mm x 85mm Through Bolt Anchors – Zinc Plated Masonry Fixings, Box of 100
A compact 6mm x 85mm through bolt option for lighter fixtures and tighter spaces. Designed for installation in concrete and solid masonry, each anchor uses a torque-controlled expansion to deliver reliable performance. Zinc plated for interior corrosion resistance and supplied with nuts and washers, these anchors are ideal for brackets, services and general hardware mounting.Compact length for lighter duty fixings,Torque-controlled expansion for consistent hold
-
M I Linings 75m Plasterboard Paper Joint Tape – Reinforced Roll for Taping Joints
A 75m roll of reinforced plasterboard paper tape designed for embedding and finishing gypsum board joints. It provides strong adhesion with setting and drying compounds, improving crack resistance and joint stability. The smooth paper surface helps achieve a flat, professional finish ready for sanding and painting. Ideal for repairs, small to medium jobs and general drywall finishing.Reinforced paper delivers strong, stable joints,Suitable for hand and automatic taping tools
-
Network Building Supplies 75mm Wide Masking Paper Tape – Painter’s Surface Protection Roll
This 75mm masking paper tape is ideal for protecting trims, frames and edges during painting and spraying. It offers reliable coverage and clean lines while helping reduce overspray on delicate surfaces. Simple to apply and remove, it supports efficient workflows across residential repaints, fit-outs and maintenance projects. A practical size for everyday masking tasks.Versatile width for trims, frames and edges,Clean removal when used as directed
-
Tradelink 7g x 51mm Bugle Head Drywall Screws – Fine Thread 18 TPI, Yellow Zinc, Pack of 100
These 7g x 51mm bugle head drywall screws feature an 18 TPI fine thread for fast, secure fixing of plasterboard to light-gauge metal studs. The bugle head reduces paper tearing and sits flush for a smooth finish ready for setting and sanding. Yellow zinc plating provides enhanced corrosion resistance during installation and service life. Supplied in a convenient 100 hang pack, they’re a reliable choice for domestic and commercial fit-outs where consistent bite and clean seating are essential.Fine 18 TPI thread for fixing plasterboard to metal studs,Yellow zinc plated for added corrosion protection
-
Network Building Supplies 85 x 305mm Sandpaper Sheets – 120 Grit Aluminium Oxide, Pack of 20
These 85 x 305mm 120 grit sandpaper sheets are ideal for general surface prep on timber, plaster and painted substrates. The aluminium oxide grain delivers consistent cutting performance and long life. Sized for hand sanding blocks or direct use, they’re perfect for smoothing filler, removing minor defects and keying surfaces before painting. Packed in 20s for convenience, ensuring you have enough on hand for continuous work without frequent resupply.120 grit for effective surface preparation,Pack of 20 sheets for site and workshop use
-
Network Building Supplies 85 x 305mm Sandpaper Sheets – 150 Grit Aluminium Oxide, Pack of 20
Refine surfaces with these 85 x 305mm 150 grit sandpaper sheets. The aluminium oxide abrasive provides reliable, even cutting for intermediate sanding on timber, fillers and primers. Ideal for use with hand blocks or direct hand sanding to remove scratches from coarser grits and prepare for finer finishing. Supplied in packs of 20 to keep projects moving with fewer interruptions for restocking.150 grit for intermediate smoothing,Pack of 20 sheets for efficient workflow
-
Network Building Supplies 85 x 305mm Sandpaper Sheets – 180 Grit Aluminium Oxide, Pack of 20
Achieve a finer finish with these 85 x 305mm 180 grit sandpaper sheets. Designed for final prep on timber, fillers and coatings, the aluminium oxide grain ensures smooth, uniform results ahead of sealing or painting. Suitable for hand blocks or hand use, they help reduce visible scratches and improve coating adhesion. Pack of 20 provides ample supply for ongoing site work and workshop tasks.180 grit for fine surface preparation,Aluminium oxide for consistent cutting performance
-
Network Building Supplies 8kg/m² Acoustic Barrier 1350mm x 5m Roll – Mass Loaded Vinyl for High Performance Noise Control
A 1350mm x 5m roll of 8kg/m² mass loaded vinyl acoustic barrier providing high levels of airborne noise reduction. The heavy-duty density adds substantial mass to partitions, ceilings and enclosures, improving acoustic separation in residential and commercial settings. Flexible and cuttable for on-site detailing, it integrates behind linings or within layered systems. Suited to high-performance applications including intertenancy walls, mechanical plant enclosures and media rooms.Extra heavy 8kg/m² mass for superior attenuation,Ideal for intertenancy walls and plant rooms
$265.30
-
M I Linings 8mm Staples – Galvanised, Pack of 2000 for Staple Guns
Contractor pack of 8mm galvanised staples designed for reliable fastening of fabrics, insulation, plastic sheeting, and light trims. Compatible with most standard tacker and staple guns that accept 8mm legs. The zinc coating enhances corrosion resistance for interior and sheltered exterior use. Sharp chisel points provide consistent penetration and a secure hold in timber and sheet materials. Supplied in a bulk pack of 2000 to keep jobs moving with fewer changeovers. AS/NZS compliant.Galvanised finish for corrosion resistance,8mm leg for fabrics, insulation, and light trims
-
Network Building Supplies 90 m Plasterboard Joint Tape – Self‑Adhesive Fibreglass Mesh
A 90 m roll of self‑adhesive fibreglass mesh joint tape designed for plasterboard joints and patching. The open weave promotes strong compound bonding while the adhesive backing speeds application without pre‑bedding. Ideal for repairs, butt joints and minor cracks. Compatible with most all‑purpose and topping compounds. Apply to clean, dry surfaces and embed with joint compound for best results.Self‑adhesive mesh for fast application,Reduces cracking across joints and repairs
-
M I Linings 90m Roll Self‑Adhesive Fibreglass Jointing Tape – Plasterboard Mesh
Trade‑grade self‑adhesive fibreglass mesh tape for reinforcing plasterboard joints and repairing cracks. High‑tack adhesive bonds firmly to clean surfaces, keeping the mesh flat under compound. Open weave promotes excellent joint compound keying and fast drying. Suitable for walls and ceilings in new work and remedial patching. The 90m roll provides extended coverage for larger projects with minimal joins. Compatible with common plasterboard systems and finishing compounds.Self‑adhesive mesh reinforces joints and repairs,Ideal for plasterboard jointing and crack patching
-
M I Linings Aerosol Spray Adhesive – High Tack, Fast Dry for Trims and Profiles
Professional aerosol spray adhesive designed for fast, clean bonding of trims, corner beads, foam, fabrics and lightweight plastics. Delivers high initial tack with a fast-drying formulation to speed up installation. Adjustable spray pattern provides even coverage and reduced overspray. Ideal for workshop and site use on vertical or overhead applications. Forms a strong, flexible bond when properly applied. Use in well-ventilated areas and test on sensitive substrates before full application.Adjustable spray pattern for controlled coverage,Bonds trims, beads, foam, fabric and light plastics
-
M I Linings M6.5 x 25mm Mushroom Head Drive Anchors – Zinc Plated, Box of 100
100-pack of M6.5 x 25mm mushroom head drive anchors for quick, tidy fixings into concrete, brick and block. Zinc plated carbon steel offers reliable corrosion protection in interior and sheltered settings. The mushroom head provides a neat, low-profile finish ideal for trims, brackets and electrical hardware. Simple install: drill, insert and drive to expand. A dependable choice for trades requiring speed and consistent holding in masonry.Low-profile mushroom head for neat finishes,Drive-in expansion for fast masonry fixing
-
M I Linings M6.5 x 38mm Mushroom Head Drive Anchors – Zinc Plated, Box of 100
100-pack of M6.5 x 38mm mushroom head drive anchors for rapid installation in concrete, brick and block. Zinc plated steel provides corrosion resistance for interior and sheltered applications. Ideal for brackets, conduit clips, electrical fixtures and general fit-off. Simple drill-and-drive method ensures consistent expansion and holding power, delivering time savings across repetitive anchoring tasks.Neat mushroom head for flush appearance,Fast drive-in expansion for masonry substrates
-
M I Linings M6.5 x 50mm Mushroom Head Drive Anchors – Zinc Plated, Box of 100
Box of 100 M6.5 x 50mm mushroom head drive anchors for secure fixings in concrete, brick and block. The longer shank allows deeper embedment where required. Zinc plated finish provides corrosion protection for interior and sheltered installs. Ideal for brackets, frames, channels and building hardware. Quick, consistent drive-in installation saves time on repetitive anchoring tasks while delivering reliable holding power.Extended length for deeper embedment,Zinc plated steel for clean, durable fixings
You have seen 77 out of 77 products
App now.
