Vincent Buda & Company
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Budabar Lintel Angle – 3000mm Length
A 150 × 100 × 6 mm hot-dip galvanised angle bar supplied in a 3000 mm length for versatile use in construction and fabrication. Ideal for lintels, bracing, frames, edging, and site works where corrosion resistance is critical. The 6 mm thickness offers reliable load capacity and rigidity. Pre-cut 3.0 m lengths streamline handling and reduce cutting and waste. A trade-ready L-angle suitable for commercial and residential projects, gates, fencing, and general steelwork, supplied to meet Australian conditions and standards.3.0 m pre-cut length for faster, cleaner installs,Durable hot-dip galvanised finish for outdoor use
$114.08
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Budabar Lintel Angle – 3300mm Length
This 150 × 100 × 6 mm galvanised Buda Bar angle comes in a 3300 mm length for larger spans, lintels, and heavy-duty fabrication. Hot-dip galvanising provides superior corrosion resistance in coastal and exposed environments. Ideal for builders, installers, and fabricators who need a robust L-angle with consistent geometry. The 6 mm thickness supports high loads and resists deformation. Delivered pre-cut to reduce on-site processing and waste, making it a practical, trade-friendly option that performs in Australian conditions.Strong 6 mm wall thickness for structural reliability,Extended 3.3 m length to suit larger spans and fabrications
$125.49
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Budabar Lintel Angle – 3600mm Length
A 150 × 100 × 6 mm hot-dip galvanised angle bar supplied in 3600 mm length, ideal for long lintels, bracing, and robust fabrication work. The L-profile provides excellent rigidity while the 6 mm thickness supports demanding loads. Galvanised coating resists rust in outdoor and marine environments. Pre-cut 3.6 m length reduces cutting time and waste on site. Suitable for structural fabrication, fencing, and general construction, delivering reliable performance and longevity under Australian conditions.4 mm+ corrosion protection via hot-dip galvanising,3.6 m pre-cut length for extended runs and spans
$136.90
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Budabar Lintel Angle – 4000mm Length
This 150 × 100 × 6 mm galvanised angle bar in a 4000 mm length is built for heavy-duty construction and fabrication. The L-shaped profile and 6 mm wall deliver strong, stable support, while the hot-dip galvanised finish protects against corrosion for outdoor use. Ideal for long lintels, bracing, frames, and fencing. Supplied in a convenient 4.0 m cut to reduce on-site processing. A reliable option for builders and fabricators seeking durable, corrosion-resistant steel sections that meet Australian conditions.Galvanised L-angle for heavy-duty construction,4.0 m length ideal for fabrication and extended lintels
$152.11
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 1800mm Length
This 150 × 100 × 6 mm galvanised render angle in an 1800 mm length is designed for crisp render terminations and robust edge protection. The thick, stable section ensures impact resistance on external corners and interfaces. Hot-dip galvanising guards against corrosion, making it ideal for outdoor and coastal applications. Pre-cut to 1.8 m for easy handling and reduced wastage. A dependable solution for renderers, bricklayers, and builders seeking straight, durable edges and long-lasting performance.Heavy-duty 6 mm render stop and edge protection,Hot-dip galvanised for exterior durability
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 2100mm Length
A 150 × 100 × 6 mm galvanised render angle in 2100 mm length for creating straight, durable render stops and edge protection. Hot-dip galvanised finish resists corrosion in exterior applications and improves long-term performance under harsh conditions. The 6 mm thickness provides stability and impact resistance on corners and terminations. Ideal for masonry, cement render, and external cladding interfaces where robust edging is required. Supplied in a trade-friendly cut length to minimise on-site trimming and speed installation.Galvanised angle for render stops and edge protection,Pre-cut 2100 mm length for clean, straight finishes
$103.32
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 2400mm Length
A 150 × 100 × 6 mm galvanised render angle supplied in a 2400 mm cut for straightforward installation on typical wall heights. The robust section helps maintain straight, impact-resistant render stops and edges, while the hot-dip galvanised finish provides reliable corrosion protection. Ideal for render terminations, openings, and corner reinforcement in external applications. Pre-cut to reduce on-site cutting, enhance productivity, and achieve consistent, professional results.Stable 6 mm section for clean, straight render edges,2400 mm length suits common wall heights
$118.08
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 2700mm Length
This 150 × 100 × 6 mm galvanised render angle in 2700 mm length provides strong, straight render stops and durable edge protection for external finishes. The heavy 6 mm section resists damage and maintains line over longer runs. Its hot-dip galvanised coating helps prevent corrosion, particularly in exposed or coastal sites. Ideal for renderers and builders targeting high-quality, consistent edges. Delivered pre-cut to improve efficiency and minimise cutting on site.Hot-dip galvanised to withstand harsh environments,Pre-cut 2700 mm length reduces on-site waste
$132.84
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 3000mm Length
A 150 × 100 × 6 mm galvanised render angle supplied in 3000 mm length for extended runs and clean, straight edges. The substantial 6 mm profile ensures stability and impact resistance around openings and terminations. Hot-dip galvanising protects the steel against rust for outdoor applications. Pre-cut for speed and consistency on site, making it an efficient option for rendering and external cladding projects where long, durable edges are required.3.0 m length for long, straight render runs,Corrosion-resistant hot-dip galvanised finish
$147.60
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 3300mm Length
This 150 × 100 × 6 mm galvanised render angle in a 3300 mm length is ideal for extended wall runs and robust edge protection. The hot-dip galvanised coating provides long-term resistance to corrosion in exterior and coastal environments. Its 6 mm profile maintains straight lines while absorbing site impacts. Pre-cut for convenience, it helps reduce on-site cutting and ensures consistent outcomes for render terminations, corners, and openings.Heavy-duty 6 mm thickness for long-term durability,Extended 3.3 m length for larger walls and facades
$162.36
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 3600mm Length
A 150 × 100 × 6 mm galvanised render angle in 3600 mm length designed for continuous edges and larger format work. The 6 mm profile ensures straight, impact-resistant render stops and terminations. Galvanised for protection in exterior applications, it suits harsh Australian conditions. Pre-cut to reduce waste and accelerate installation, this angle is a reliable choice for rendering, cladding interfaces, and boundary edges requiring durable, clean lines.Long 3.6 m cut for continuous render edges,Corrosion-resistant hot-dip galvanised steel
$177.12
-
Vincent Buda & Company 150 x 100 x 6mm Galvanised Render Lintel Angle – 4000mm Length
This 150 × 100 × 6 mm galvanised render angle in 4000 mm length is ideal for long, straight runs with fewer joins. The robust 6 mm profile provides durable edge protection and clean terminations in rendering and cladding work. Hot-dip galvanising offers long-lasting corrosion resistance for external and coastal environments. Pre-cut 4.0 m length improves efficiency and reduces site waste, making it a practical solution for professional renderers and builders.Heavy-duty 6 mm render stop for exposed edges,4.0 m length for long runs and fewer joins
$196.80
-
Vincent Buda & Company 200mm Box Grate End Cap – Galvanised
200 mm end cap for box grate drainage channels, fabricated from hot‑dip galvanised steel for long‑term durability in outdoor and trafficable environments. Provides a clean termination point, helping contain debris and direct flow within the system. Simple to install and secure to compatible 200 mm channel sections. Ideal for residential and commercial drainage runs along driveways, patios and pathways.Fits 200 mm nominal box grate channels,Hot‑dip galvanised for corrosion resistance,Provides clean termination and debris control
-
Vincent Buda & Company 200mm Box Grate Joiner – Galvanised
Galvanised steel joiner for 200 mm box grate channels, designed to securely connect adjoining sections in long drainage runs. Hot‑dip galvanised finish provides robust corrosion resistance in outdoor and wet environments. Helps maintain alignment and system integrity for reliable flow and simplified installation. Suitable for patios, driveways, pathways and light commercial drainage layouts.Connects 200 mm box grate channel sections,Galvanised steel resists corrosion,Ensures alignment and leak‑resistant joints
-
Vincent Buda & Company 200mm Box Grate Outlet – 90mm Dia, Galvanised
Bottom outlet for 200 mm box grate channels with a 90 mm diameter connection to standard drainage pipework. Constructed from hot‑dip galvanised steel to withstand corrosive environments and frequent wetting. Provides a secure discharge point within the channel run, simplifying system layout and installation. Suitable for residential and commercial surface drainage applications.Suits 200 mm nominal box grate channels,90 mm diameter outlet for pipe connection,Hot‑dip galvanised for extended service life
-
Vincent Buda & Company 200mm x 10mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 5100mm
Heavy-duty galvanised steel T-bar with 200mm flange x 10mm thick and 200mm web x 10mm thick, supplied in a 5100mm length. The hot-dip galvanised finish provides long-term protection in outdoor and coastal environments. Suited to lintels, edge forms, mezzanine platforms and general structural fabrication where high rigidity and durability are required. Easy to cut, drill and weld with standard equipment. A reliable section for builders, fabricators and maintenance applications, compliant with AS/NZS requirements.Hot-dip galvanised for superior corrosion resistance,Ideal for lintels, platforms and structural fabrication
$1,127.08
-
Vincent Buda & Company 200mm x 10mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 5400mm
Galvanised steel T-bar featuring a 200mm flange x 10mm thick and a 200mm web x 10mm thick in a 5400mm length. The hot-dip galvanised coating delivers excellent durability and weather resistance for structural and fabrication work. Suitable for use as lintels, edge supports and general frameworks. Straightforward to cut, drill and weld with standard tools and processes. A dependable choice for construction and maintenance projects, meeting AS/NZS expectations for quality.Robust 10mm flange and web thickness,Corrosion resistant hot-dip galvanised finish
$1,193.39
-
Vincent Buda & Company 200mm x 10mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 5700mm
This galvanised T-bar provides a 200mm flange x 10mm thick and a 200mm web x 10mm thick in a 5700mm length. The hot-dip galvanised coating resists rust and abrasion, making it ideal for external or high-moisture environments. Commonly used for lintels, partitions, platform edges and custom structural fabrication. It cuts, drills and welds easily with appropriate techniques. Built for reliability on site and workshop projects, compliant with AS/NZS standards.10mm thick flange and web for strength,Hot-dip galvanised for outdoor durability
$1,259.69
-
Vincent Buda & Company 200mm x 10mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 6000mm
A 6000mm galvanised steel T-bar with a 200mm flange x 10mm thick and a 200mm web x 10mm thick. Designed for structural applications including lintels, bracing, platforms and general fabrication. The hot-dip galvanised finish enhances resistance to corrosion and wear, suited to outdoor and coastal conditions. Processes well with standard cutting, drilling and welding methods. A dependable, low-maintenance section for builders and fabricators, aligned with AS/NZS requirements.High strength section for structural work,Durable hot-dip galvanised protection
$1,239.24
-
Vincent Buda & Company 200mm x 10mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 6300mm
A long-length galvanised steel T-bar with 200mm flange x 10mm thick and 200mm web x 10mm thick in a 6300mm length. The hot-dip galvanised finish delivers excellent corrosion resistance, ideal for external, coastal and industrial applications. Suitable for lintels, edge beams, platforms and general steel fabrication where strength and durability are paramount. Processes easily with standard cutting, drilling and welding practices. Trade-ready and compliant with AS/NZS expectations.Heavy-duty 10mm flange and web,Long 6.3m length for extended spans
$1,301.20
-
Vincent Buda & Company 200mm x 170mm Heelguard Box Grate & Channel - Galvanised Steel - 3m Length
This 200 x 170mm heelguard box grate channel provides reliable surface drainage for driveways, footpaths and patios. The 3m length reduces joints for faster installation and a cleaner line. Hot-dip galvanised steel construction offers excellent corrosion protection and longevity in outdoor environments. The heelguard grate pattern is pedestrian-friendly, reducing trip hazards while maintaining high flow capacity. Suitable for residential and light commercial applications, it connects with standard pits and fittings for a complete drainage solution.Heelguard grate for safe pedestrian access and debris control,3m galvanised steel channel for efficient surface drainage
$948.00
-
Vincent Buda & Company 200mm x 170mm Heelguard Box Grate & Channel - Galvanised Steel 2m
Galvanised heelguard box grate and channel, 200mm wide x 170mm deep, supplied in a 2m length. The heelguard grate pattern offers slip resistance and pedestrian safety while allowing efficient water flow. Hot-dip galvanised steel construction provides excellent corrosion resistance for driveways, patios, pathways and commercial drainage. Suitable for landscaping and civil works, easy to install and maintain. A robust, trade-grade drainage solution compliant with AS/NZS expectations.Heelguard anti-slip grate pattern,Hot-dip galvanised channel for durability
$632.00
-
Vincent Buda & Company 200mm x 170mm Maxi Heelguard Box Grate & Channel - Galvanised Steel - 2m Length
Robust 200 x 170mm box grate channel with Maxi heelguard is engineered for commercial and residential drainage where durability and slip resistance matter. The 2m section delivers reliable surface water capture along driveways, courtyards and pathways. Hot-dip galvanised steel provides long-term corrosion protection in harsh Australian conditions. The heelguard grate profile offers pedestrian safety and debris control while maintaining flow. Ideal for retrofits or new builds, it integrates easily with compatible pits and outlets for a clean, professional finish.Heavy duty Maxi heelguard grate for high traffic drainage,Hot-dip galvanised steel for superior corrosion resistance
$566.00
-
Vincent Buda & Company 200mm x 170mm Maxi Heelguard Box Grate & Channel - Galvanised Steel - 3m Length
A heavy-duty 200 x 170mm box grate channel featuring Maxi heelguard for strength, safety and high flow in demanding sites. The 3m length minimises jointing, improving hydraulics and easing installation across driveways and access ways. Made from hot-dip galvanised steel for outstanding corrosion resistance and service life in exposed environments. The heelguard profile enhances pedestrian safety while capturing debris. Ideal for commercial and residential drainage where performance, durability and a clean finish are required.Maxi heelguard grate for high load and heavy traffic areas,3m hot-dip galvanised channel for long run installations
$849.00
-
Vincent Buda & Company 200mm x 170mm Traditional Box Grate & Channel - Galvanised Steel - 2m Length
This 200 x 170mm traditional box grate channel is a reliable choice for general drainage across patios, pathways and driveways. Supplied in a 2m length, it simplifies handling and installation while maintaining strong hydraulic performance. Constructed from hot-dip galvanised steel to resist corrosion and ensure long service life outdoors. The traditional grate profile delivers a balance of flow, strength and debris interception. Compatible with standard pits and fittings, it’s suitable for new builds and refurbishment projects alike.Traditional grate pattern for versatile drainage applications,2m hot-dip galvanised steel section for durability
$450.00
-
Vincent Buda & Company 200mm x 170mm Traditional Box Grate & Channel - Galvanised Steel - 3m Length
A 200 x 170mm traditional box grate channel in a convenient 3m length for continuous runs along driveways, courtyards and paths. Built from hot-dip galvanised steel to withstand corrosion and wear in outdoor conditions. The classic grate pattern provides reliable flow and debris management in residential and light commercial settings. Easy to lay and connect with compatible pits and outlets, it delivers a durable, neat and functional drainage solution across a range of projects.Traditional grate design for general purpose drainage,3m galvanised channel reduces joints and speeds install
$675.00
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 3900mm
Galvanised T-bar combining a 200mm flange x 6mm thick with a 200mm web x 10mm thick, supplied in 3900mm length. This balanced section offers reduced weight without compromising stiffness where the web carries most of the load. Ideal for lintels, frames, edge beams and general fabrication in outdoor or humid environments. Hot-dip galvanised for long service life. Straightforward to cut, drill and weld. Built for trade reliability and compliant with AS/NZS standards.Lightweight flange with heavy web for rigidity,Hot-dip galvanised corrosion resistance
$671.49
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 4200mm
This galvanised T-bar features a 200mm flange x 6mm thick and a 200mm web x 10mm thick in a 4200mm length. It offers a practical balance of weight and stiffness for lintels, framing, edge supports and fabrication. The hot-dip galvanised coating ensures durable corrosion resistance for outdoor and high-moisture environments. Suitable for cutting, drilling and welding with standard tools. A reliable, trade-grade section meeting AS/NZS requirements.Optimised weight with 6mm flange, 10mm web,Hot-dip galvanised for long-term protection
$723.14
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 4500mm
Galvanised steel T-bar with a 200mm flange x 6mm thick and 200mm web x 10mm thick, supplied in a 4500mm length. Designed for lintels, platforms, edge beams and general fabrication where a lighter flange and robust web are preferred. Hot-dip galvanised for lasting protection in outdoor environments. Easy to process using standard cutting, drilling and welding techniques. Trade-ready and compliant with AS/NZS standards.6mm flange, 10mm web for structural efficiency,Corrosion resistant hot-dip galvanised finish
$774.79
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 4800mm
A 4800mm galvanised T-bar featuring a 200mm flange x 6mm thick paired with a 200mm web x 10mm thick. Provides strong support for lintels, edge framing and general steelwork with a reduced flange weight. The hot-dip galvanised finish resists corrosion for long service life in demanding environments. Straightforward to cut, drill and weld. A dependable trade section suitable for construction and fabrication, aligning with AS/NZS standards.Balanced weight and stiffness profile,Hot-dip galvanised to AS/NZS practice
$826.46
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 5100mm
This 5100mm T-bar combines a 200mm flange x 6mm thick with a 200mm web x 10mm thick. Hot-dip galvanised for corrosion resistance, it suits outdoor lintels, framing and general fabrication tasks. Provides a lighter overall section while retaining web stiffness where it’s needed most. Cuts, drills and welds using standard techniques. A reliable choice for builders and fabricators, compliant with AS/NZS expectations for structural materials.6mm flange with 10mm web for strength,Durable hot-dip galvanised coating
$878.38
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (H) Galvanised Steel T-Bar - 5400mm
Galvanised steel T-bar with 200mm flange x 6mm thick and 200mm web x 10mm thick in a 5400mm length. The hot-dip galvanised finish ensures excellent corrosion resistance for external, coastal and industrial sites. Ideal for lintels, edge beams, framing and fabricated assemblies. Easy to cut, drill and weld with standard practices. Reliable, trade-grade section meeting AS/NZS requirements for construction and maintenance applications.Optimised 6mm flange, robust 10mm web,Hot-dip galvanised for harsh environments
$929.75
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 10mm (W) Galvanised Steel T-Bar - 5700mm
This 5700mm T-bar combines a 200mm flange x 6mm thick with a 200mm web x 10mm thick to balance weight and rigidity. The hot-dip galvanised coating provides dependable corrosion resistance, ideal for external and industrial environments. Suitable for lintels, edge beams and general fabrication. Simple to cut, drill and weld using standard practices. Built for trade performance and compliant with AS/NZS standards for construction materials.6mm flange with 10mm web for strength,Hot-dip galvanised for long service life
$981.40
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 6mm (H) Galvanised Steel T-Bar - 1200mm
Compact 1200mm galvanised T-bar with a 200mm flange x 6mm thick and a 200mm web x 6mm thick. Ideal for small spans, fabrication details, repairs and edging where a lighter section is preferred. Hot-dip galvanised coating provides reliable corrosion resistance for outdoor and wet areas. Processes easily with standard cutting, drilling and welding methods. Trade-ready and compliant with AS/NZS standards for general construction and fabrication use.Light-duty 6mm flange and web,Hot-dip galvanised for corrosion protection
$160.70
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 6mm (H) Galvanised Steel T-Bar - 1500mm
Galvanised T-bar with 200mm flange x 6mm thick and 200mm web x 6mm thick in a 1500mm length. Suitable for lighter structural details, edging, repairs and custom fabrication where reduced weight is advantageous. The hot-dip galvanised coating enhances resistance to rust and wear in external or damp environments. Easy to cut, drill and weld. A practical trade section that aligns with AS/NZS requirements for general use.Lightweight 6mm flange and web,Galvanised finish for outdoor use
$200.87
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 6mm (H) Galvanised Steel T-Bar - 1800mm
A 1800mm galvanised T-bar featuring a 200mm flange x 6mm thick and 200mm web x 6mm thick. Ideal for lighter spans, trim components, brackets and general fabrication. The hot-dip galvanised finish delivers durable protection in outdoor and wet settings. Processes well using standard cutting, drilling and welding methods. A versatile, trade-grade section suitable for construction and maintenance work, compliant with AS/NZS standards.Light-duty 6mm web and flange,Hot-dip galvanised corrosion resistance
$241.04
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 6mm (H) Galvanised Steel T-Bar - 2100mm
Galvanised steel T-bar with a 200mm flange x 6mm thick and 200mm web x 6mm thick in a 2100mm length. Designed for lighter-duty framing, edging and custom fabrication. The hot-dip galvanised coating protects against corrosion in outdoor and wet areas. Easy to cut, drill and weld with standard tools. A versatile trade section for construction and maintenance projects, meeting AS/NZS requirements.Lightweight 6mm web and flange section,Galvanised finish for durability
$281.23
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 6mm (H) Galvanised Steel T-Bar - 900mm
A compact 900mm galvanised T-bar with 200mm flange x 6mm thick and 200mm web x 6mm thick. Perfect for small spans, edging, brackets and fabrication details where a lighter section is preferred. The hot-dip galvanised finish improves durability in outdoor and damp conditions. Easy to cut, drill and weld with common workshop tools. Reliable trade-grade section, compliant with AS/NZS standards for general construction use.Compact 900mm length for small works,Hot-dip galvanised corrosion protection
$120.52
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 8mm (H) Galvanised Steel T-Bar - 2400mm
Galvanised T-bar featuring a 200mm flange x 6mm thick and a 200mm web x 8mm thick, supplied in a 2400mm length. The section balances weight and stiffness for lintels, frames and general steel fabrication. Hot-dip galvanised coating provides robust corrosion resistance in external or high-moisture environments. Easily cut, drilled and welded using standard methods. Trade-grade quality aligned with AS/NZS standards.6mm flange with 8mm web for balanced strength,Hot-dip galvanised for outdoor durability
$367.30
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 8mm (H) Galvanised Steel T-Bar - 2700mm
This 2700mm galvanised T-bar incorporates a 200mm flange x 6mm thick and a 200mm web x 8mm thick for efficient performance in lintels, edge supports and general fabrication. The hot-dip galvanised finish resists rust and wear, extending service life in outdoor settings. Straightforward to cut, drill and weld with common workshop tools. A reliable trade section that meets AS/NZS expectations for construction materials.Balanced 6mm flange and 8mm web,Hot-dip galvanised corrosion resistance
$413.23
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 8mm (H) Galvanised Steel T-Bar - 3000mm
A 3000mm galvanised steel T-bar with 200mm flange x 6mm thick and 200mm web x 8mm thick. Suitable for lintels, frames, platforms and general fabrication projects. The hot-dip galvanised coating offers long-term corrosion protection in outdoor and coastal areas. Easy to process—cut, drill and weld with standard equipment. Trade-grade reliability, compliant with AS/NZS standards.6mm flange, 8mm web for versatile use,Durable hot-dip galvanised finish
$459.14
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 8mm (H) Galvanised Steel T-Bar - 3300mm
Galvanised T-bar with a 200mm flange x 6mm thick and a 200mm web x 8mm thick, supplied in a 3300mm length. Designed for lintels, edge beams and fabricated structures where balanced weight and strength are important. The hot-dip galvanised coating protects against corrosion and abrasion in demanding environments. Processes easily—cut, drill and weld. Trade-grade section conforming to AS/NZS requirements.Weight-efficient 6mm flange, 8mm web,Hot-dip galvanised for harsh conditions
$505.05
-
Vincent Buda & Company 200mm x 6mm (W) / 200mm x 8mm (H) Galvanised Steel T-Bar - 3600mm
This 3600mm galvanised steel T-bar combines a 200mm flange x 6mm thick with a 200mm web x 8mm thick, providing a versatile section for lintels, framing and general fabrication. The hot-dip galvanised finish resists corrosion for reliable performance outdoors and in damp areas. Cuts, drills and welds with standard tools. A dependable, trade-ready section meeting AS/NZS standards for construction applications.Balanced 6mm flange and 8mm web profile,Hot-dip galvanised for extended service life
$550.97
-
Vincent Buda & Company 300mm Box Grate End Cap – Galvanised Steel
Seal the end of your 300mm box grate channel with this durable galvanised steel end cap. Designed for quick fitment on site, it helps contain water flow and prevents debris escape at terminations. The heavy‑duty galvanised finish resists corrosion in outdoor and wet areas, making it ideal for driveways, courtyards and commercial drainage runs. Compatible with standard 300mm grate channels, it simplifies installation and maintenance while delivering a neat, robust finish to your drainage system.Closes channel ends to contain flow and debris,Hot-dip galvanised for corrosion resistance
-
Vincent Buda & Company 300mm Box Grate Joiner – Galvanised Steel
This 300mm box grate joiner provides a strong, reliable connection between channel sections, ensuring alignment and continuity across longer drainage runs. Manufactured from galvanised steel, it is built to handle exposed conditions and resist corrosion in wet or external environments. The simple design speeds installation and supports consistent grade and flow through the system. Ideal for residential or commercial drainage projects where precise joins and robust performance are required.Securely connects box grate channel sections,Galvanised steel for long service life
-
Vincent Buda & Company 300mm Outlet Adaptor – 90mm Diameter, Galvanised Steel
Create a reliable discharge point in your 300mm box grate system with this 90mm diameter outlet. The robust galvanised steel construction withstands harsh weather, traffic and debris, ensuring long‑term service life. Designed to integrate neatly with standard channel sections, it simplifies plumbing connection to stormwater lines and promotes efficient water removal. Ideal for driveways, car parks and landscaped areas where dependable drainage flow is essential.Forms a 90mm discharge point from 300mm channels,Heavy-duty galvanised steel for durability
-
Vincent Buda & Company 300mm x 170mm Heelguard Box Grate & Channel – Galvanised, 2m Length
This 2m 300×170mm heelguard box grate channel combines high flow performance with pedestrian safety. The heelguard grate pattern reduces trip hazards and provides anti‑slip traction, making it ideal for paths, courtyards and commercial access ways. The heavy‑duty galvanised steel construction resists corrosion and impact, while the deep 170mm channel supports efficient runoff in heavy rain. Designed to integrate with matching end caps, joiners and outlets for a complete drainage solution.Heelguard anti-slip grate for pedestrian safety,Galvanised channel for long-term corrosion resistance
$779.00
-
Vincent Buda & Company 300mm x 170mm Heelguard Box Grate & Channel – Galvanised, 3m Length
This 3m 300×170mm heelguard box grate channel offers safe, effective drainage where pedestrian traffic is frequent. The heelguard design reduces heel catch risks and improves traction, while the 170mm channel depth handles high flow across driveways and walkways. Manufactured from galvanised steel for corrosion resistance and site toughness, it integrates with standard accessories for neat terminations and outlets. Ideal for commercial and residential projects requiring durable, compliant surface drainage.Anti-slip heelguard grate for public areas,Heavy-duty galvanised steel channel for durability
$1,168.50
You have seen 96 out of 156 products
App now.
