WAFFLE POD
-
Reo Point 150mm Solid Waffle Pod Void Former
150mm-thick solid EPS waffle pod for use in raft slab systems where additional bearing or localised support is required, such as edge beams or load points. Provides consistent dimensions for accurate layout and reinforcement placement. Lightweight for rapid handling, clean cutting and fast setup. Integrates with typical pod chairs, spacers and trench formers to create uniform, efficient slab geometry.Solid EPS pod for enhanced bearing or edge zones,Modular 1090 x 1090 size suits standard spacers
-
Reo Point 150mm Stock Waffle Pod Void Former
150mm EPS waffle pod used in ribbed raft slab construction to create voids, reduce concrete volume and improve thermal performance. The 1090 x 1090 plan size integrates with common spacers and chairs for fast, repeatable layout. Easy to cut and position, enabling efficient setup and consistent slab geometry. Suitable for residential foundations and slabs on reactive soils when used in accordance with engineering design.Lightweight EPS for quick, clean site handling,Standard 1090 x 1090 grid module for raft slabs
-
Reo Point 225mm Waffle Pod Void Former – EPS, Stock
225 mm waffle pods provide a consistent void former system for raft slab construction, reducing concrete volume while improving thermal performance. Manufactured from rigid expanded polystyrene, they are easy to handle, cut and position, helping speed up set‑out and reinforcement placement. Their stable dimensions assist in maintaining slab geometry and consistent beam sizes. Suitable for residential slabs on ground, the pods integrate with pod chairs, spacers and edge form systems. Use with plastic membrane and conventional reinforcement to achieve a strong, efficient, and clean jobsite workflow.Standard 1090 × 1090 footprint for fast grid layout,Lightweight EPS for easy handling and dimensional stability
-
Reo Point 300mm Waffle Pod Void Former – EPS, Stock
This 300 mm stock waffle pod is designed for raft slab systems where increased beam depth is required. Made from rigid expanded polystyrene, it provides excellent dimensional consistency and easy site handling. The pods interlock with pod spacers and chairs to maintain spacing and alignment before concrete placement. Using pods reduces concrete volume, supports thermal efficiency, and maintains a clean worksite with minimal waste. Ideal for residential slabs on ground, they integrate seamlessly with membranes, reinforcement, and edge formwork components.Standard 1090 × 1090 grid module for fast set‑out,Lightweight EPS simplifies handling and placement
-
Reo Point 375mm Waffle Pod Void Former – EPS, Stock
This 375 mm stock waffle pod is designed to deliver robust raft slab performance where deeper beams are specified. The EPS pod is dimensionally stable, easy to place and secure, and compatible with standard spacers and chairs for accurate grid alignment. By creating voids, it reduces concrete usage while maintaining slab stiffness and thermal benefits. Ideal for residential slab‑on‑ground applications, it pairs with membranes, reinforcement, and edge formwork to streamline installation and achieve clean, efficient, and dependable results.Standard 1090 × 1090 module for quick slab grids,Deep 375 mm void for enhanced beam performance
-
Reo Point Pod Scrap Bag – Heavy Duty, Site Cleanup
This heavy‑duty woven scrap bag is ideal for collecting polystyrene pod offcuts and general construction waste, keeping slab sites tidy and safe. The durable polypropylene fabric resists tearing and abrasion, while reinforced lifting loops facilitate secure crane or forklift movement. Its generous capacity helps reduce trips to the skip, improving productivity and housekeeping. Suitable for concrete, formwork and general building sites, the bag folds flat for storage and can be reused where appropriate to minimise waste and reduce clean‑up time.Reinforced lifting loops for safe handling,Woven PP resists tears and site abrasion
-
Reo Point Pod Spacer – 1-Way Interlocking, Heavy Duty
The 1‑way waffle pod spacer is used at slab edges and perimeters to maintain accurate spacing and straight alignment. Its tough polypropylene construction withstands site handling while the clip‑in design enables rapid placement. Combine with 2‑way and 4‑way spacers to lock grids across the slab, ensuring pods stay positioned during membrane placement and steel fixing. This improves layout accuracy, reduces rework, and supports clean, efficient raft slab construction with consistent beam geometry throughout the pour.Secures pods along slab edges and perimeters,Quick clip‑in design speeds installation
-
Reo Point Pod Spacer – 2-Way Interlocking, Heavy Duty
This 2‑way waffle pod spacer aligns pods in straight runs, maintaining consistent gaps and preventing drift during reinforcement placement. The moulded polypropylene body is tough, lightweight and quick to install, improving accuracy and speed on slab set‑outs. Use in combination with 1‑way and 4‑way spacers to control pod movement at edges, internal runs and intersections. Designed for repeated handling and site conditions, it helps deliver clean, efficient grids prior to membrane, steel fixing and concrete placement.Locks pods in straight runs for consistent spacing,Durable polypropylene resists site impact
-
Reo Point Pod Spacer – 4-Way Interlocking, Heavy Duty
This 4‑way spacer fixes pod intersections to keep the waffle grid square and properly spaced during set‑out and reinforcing. Moulded from impact‑resistant polypropylene, it installs quickly and holds position reliably under foot traffic. Use with 1‑way and 2‑way spacers to control edges and runs, creating a stable layout before membranes and steel are installed. A simple, durable accessory that helps deliver faster, cleaner slab preparation and consistent beam dimensions for reliable raft slab performance.Locks pod intersections to maintain accurate modules,Impact‑resistant PP for tough site conditions
App now.
