Connectors/Joiners
-
Builders Mitre 10 Pryda Nailplate Knuckle 67 x 127mm
The Pryda 67 x 127mm Knuckle Nailplate is a compact, galvanised connector with toothed knuckles for rapid timber reinforcement. Hammer into place to form a secure joint without drilling. Ideal for repairs, bracing, and general framing in residential construction where a small, strong plate is needed. Enables fast, consistent results with minimal tools.
-
Builders Mitre 10 Pryda Nailplate Knuckle 76 x 127mm
This Pryda 76 x 127mm Knuckle Nailplate provides robust, galvanised reinforcement for timber joints and splices. Knuckle teeth embed under hammering, enabling fast installation without pre‑drilling. Use for bracing, repairs, and strengthening tasks in residential framing. A versatile connector that supports consistent, durable results on site.
-
Builders Mitre 10 Pryda Nailplate Knuckle 76 x 190mm
The Pryda 76 x 190mm Knuckle Nailplate is a galvanised connector for strengthening timber joints, with knuckle teeth that hammer in for quick, secure fixation. Ideal for splicing, bracing, and general reinforcement in residential carpentry and renovations. Delivers dependable, repeatable performance for on‑site repairs and structural tie‑ins.
-
Builders Mitre 10 Pryda Nailplate Knuckle 76 x 254mm
This Pryda 76 x 254mm Knuckle Nailplate is a larger galvanised connector designed for reinforcing longer timber joints and splices. The hammer‑in knuckle teeth provide fast, reliable fixing without drilling. Suitable for bracing, repairs, and strengthening where extended coverage is needed. A robust solution for residential framing and refurbishment projects.
-
Builders Mitre 10 Pryda Nailplate Knuckle 76 x 63mm
The Pryda 76 x 63mm Knuckle Nailplate is a compact, galvanised connector for quick reinforcement of small timber joints. Knuckle teeth embed into the timber under hammering, eliminating pre‑drilling. Ideal for minor repairs, bracing, and light duty framing tasks. A handy, time‑saving plate for on‑site adjustments and strengthening.
-
Builders Mitre 10 Pryda Pergola Angle Bracket 130 x 50 x 47mm
This Pryda Pergola Angle Bracket, 130 x 50 x 47mm, provides a sturdy, galvanised connection for pergola beams and posts. Pre‑punched holes allow quick fixing with screws or bolts for secure assembly. Ideal for outdoor structures where a strong, durable bracket is required. Galvanised protection helps resist corrosion and extend service life in exposed conditions.
-
Blacktown Building Supplies Pryda Pergola Angle Bracket 88 x 63 x 36 x 1.6mm
This Pryda pergola angle bracket provides robust right‑angle reinforcement for outdoor timber structures. Sized 88 x 63 x 36 x 1.6mm, it’s made from galvanised steel to resist corrosion in exterior environments. Pre‑punched fixing holes promote fast, accurate installation and reliable load transfer at beam‑to‑post and beam‑to‑rafter connections. Ideal for pergolas, verandahs and general landscaping projects, the compact profile delivers strength without bulk, improving alignment and stability while maintaining a clean, professional appearance.
-
Builders Mitre 10 Pryda Pergola Angle Bracket 88 x 63 x 36mm
The Pryda Pergola Angle Bracket, 88 x 63 x 36mm, is a compact, galvanised bracket for connecting pergola components and general framing. Pre‑punched holes make installation fast and consistent. Suitable for outdoor structures, it delivers reliable strength and corrosion resistance. Use for small connections, braces, and tie‑ins where a durable angle is required.
-
Builders Mitre 10 Pryda Post Anchor Bolt Down w Washer 90mm M10
This 90mm M10 Pryda Bolt‑Down Post Anchor with washer secures timber posts to concrete or timber substrates. The galvanised finish offers corrosion resistance for outdoor use, while the bolt‑down design simplifies installation on slabs and decks. Ideal for pergolas, balustrades, and fencing, it provides a strong, stable base connection. Pre‑formed holes suit standard anchors and bolts for quick, consistent fixing.
-
Builders Mitre 10 Pryda Post Anchor Full Stirrup 200 x 100mm M10
The Pryda Full Stirrup Post Anchor, 200 x 100mm M10, provides robust support and lateral restraint for timber posts fixed to concrete footings. The galvanised stirrup encapsulates the post base, improving stability and durability. Pre‑punched holes suit standard bolts and anchors, enabling fast installation. Ideal for pergolas, verandahs, and heavy posts in outdoor structures requiring strong, long‑lasting connections.
-
Blacktown Building Supplies Pryda Post Full Stirrup Post Anchor With Solid Stem 150mm Leg
This Pryda full stirrup post anchor with a 150mm solid stem leg secures timber posts in concrete footings while elevating them above ground to reduce moisture contact. The robust galvanised steel stirrup offers excellent lateral restraint and bolt‑through fastening, delivering a stable, long‑lasting base for pergolas, verandahs, carports and fencing. The solid stem provides rigid embedment and accurate height setting. Designed for outdoor use, it enables professional‑grade installation and durable performance in a wide range of landscaping and structural projects.
-
Blacktown Building Supplies Pryda Post Half Stirrup Post Anchor With Stake 150mm Leg
The Pryda half stirrup post anchor with 150mm stake leg provides a practical solution for anchoring timber posts into soil or compacted ground. The drive‑in stake offers quick installation without full concrete footings, while the galvanised steel stirrup delivers secure lateral restraint and bolt‑through fixing. Ideal for light fencing, screens and landscaping structures, it elevates the post base to help reduce moisture exposure. Use where convenience and speed are important, while still achieving a stable, durable support.
-
Blacktown Building Supplies Pryda Post Post Anchor Centre Fix 130mm Leg
This Pryda centre fix post anchor with 130mm leg is designed for mounting timber posts to a concrete footing with a centrally positioned fixing. The galvanised steel construction offers corrosion resistance, while the design provides reliable uplift and lateral restraint. Ideal for pergolas, verandahs, and deck posts, it raises the timber clear of the concrete to assist with drainage and durability. The compact leg aids accurate embedment and alignment, ensuring a clean, professional installation and long‑term stability.
-
Blacktown Building Supplies Pryda Post Support 100mm Bolt Down Anchor With Washer
The Pryda 100mm bolt down post anchor with washer secures 100mm timber posts to existing concrete slabs, pads or walls. Supplied with a washer for firm clamping, the galvanised steel base resists corrosion and elevates the post to reduce moisture contact. Ideal for decks, balustrades, pergolas and carports, the bolt‑down design allows rapid, accurate installation with minimal site work. Achieve tidy, professional finishes while maintaining strong lateral restraint and dependable long‑term performance in exterior applications.
-
Blacktown Building Supplies Pryda Post Support 100mm Full Stirrup 130mm Leg
This Pryda 100mm full stirrup post support with 130mm leg provides a robust, embedded base for timber posts in concrete footings. The galvanised stirrup clamps both sides of the post for excellent restraint, while the leg enables accurate setting and uplift resistance. Suitable for pergolas, verandahs, decks and general landscaping, it lifts the post clear of ground contact to enhance durability. A reliable choice where long‑term stability, corrosion resistance and a neat, professional installation are essential.
-
Blacktown Building Supplies Pryda Post Support 100mm Full Stirrup 200mm Leg
The Pryda 100mm full stirrup with 200mm leg offers increased embedment depth for added stability in concrete footings. Galvanised for corrosion resistance, the full stirrup design restrains the post on both sides and elevates it above ground to promote longevity. Ideal for pergolas, verandahs, carports and deck posts, it provides dependable lateral and uplift performance. Choose the 200mm leg when site conditions or engineering require deeper set‑down and precise alignment during installation.
-
Blacktown Building Supplies Pryda Post Support 100mm Full Stirrup 300mm Leg
This Pryda 100mm full stirrup post support with a 300mm leg delivers a deep‑set, highly stable base for posts embedded in concrete footings. The galvanised construction resists corrosion, while the full stirrup clamps both sides for superior restraint. Use where additional depth is preferred, such as exposed sites, higher loads or softer ground conditions. Suitable for pergolas, decks and structural landscaping, it elevates the post above ground to reduce moisture contact and extend service life.
-
Blacktown Building Supplies Pryda Post Support 125mm Full Stirrup 300mm Leg
The Pryda 125mm full stirrup with 300mm leg is designed for larger section posts requiring deep embedment. The galvanised steel stirrup provides secure clamping on both faces, excellent lateral restraint and uplift resistance, while the post remains elevated to minimise moisture exposure. Ideal for pergolas, verandahs, heavy screens and feature posts, it delivers a neat, professional installation with long‑term durability. Choose this size where heavier timbers or more demanding site conditions call for greater stability.
-
Blacktown Building Supplies Pryda Post Support 90mm Bolt Down Anchor
The Pryda 90mm bolt down post anchor provides a fast, reliable way to fix 90mm timber posts to existing concrete slabs or footings. Its galvanised base resists corrosion and elevates the post off the surface to promote drainage and durability. Ideal for decks, handrails, screens and light structures, the bolt‑down design ensures quick installation with precise alignment. Achieve a clean, professional finish while delivering strong lateral restraint and dependable performance in exterior environments.
-
Blacktown Building Supplies Pryda Post Support 90mm Bolt Down Anchor With Washer
This Pryda 90mm bolt down post anchor includes a washer for secure clamping and neat finishing. Designed for fixing 90mm posts to existing concrete, it streamlines installation of decks, balustrades and pergolas. The galvanised, elevated base resists corrosion and helps protect the post from moisture. Pre‑drilled holes facilitate quick, accurate anchoring. Use where a tidy appearance, reliable restraint and long‑term durability are required in exterior applications, without the need for new concrete footings.
-
Blacktown Building Supplies Pryda Post Support 90mm Full Stirrup 130mm Leg
The Pryda 90mm full stirrup with 130mm leg provides a compact embedded base for 90mm posts set in concrete. Its galvanised stirrup securely clamps both sides of the post and elevates the timber to reduce moisture exposure. Ideal for decks, pergolas and light structures, the 130mm leg assists in accurate height and alignment during pour. Choose this model for dependable restraint, corrosion resistance and a professional finish where space or footing depth is limited.
-
Blacktown Building Supplies Pryda Post Support 90mm Full Stirrup 200mm Leg
This Pryda 90mm full stirrup with 200mm leg offers increased embedment for posts set in concrete, improving stability and uplift resistance. The galvanised steel stirrup provides two‑sided clamping and elevates the post to assist with durability. Suitable for pergolas, verandahs and deck posts, it delivers a neat, professional appearance and reliable long‑term performance. Use the 200mm leg where site conditions or loading call for deeper set‑down while maintaining accurate alignment during installation.
-
Blacktown Building Supplies Pryda Post Support 90mm Full Stirrup 300mm Leg
The Pryda 90mm full stirrup with 300mm leg provides deep embedment for maximum stability in concrete footings. Its galvanised construction resists corrosion, and the raised stirrup design protects the post base from moisture. Ideal for exposed sites, heavier loads or softer ground conditions, it delivers strong lateral restraint and uplift performance. A professional, durable solution for decks, pergolas and structural landscaping where long‑term reliability is essential.
-
Blacktown Building Supplies Pryda Post Support 90mm Full Stirrup 75mm Leg
This Pryda 90mm full stirrup with a 75mm leg offers a compact embedment option for shallow concrete footings. The galvanised steel stirrup secures both sides of the post and elevates it above the footing to assist with drainage and longevity. Ideal for low structures or where footing depth is restricted, it provides reliable restraint, quick installation and a neat, professional appearance for decks, screens and light framing projects.
-
Blacktown Building Supplies Pryda Post Support Adjustable Post Anchor Pair
This pair of Pryda adjustable post anchors allows precise levelling and alignment of timber posts on site. Ideal for decks, pergolas and verandahs, the adjustable design accommodates minor variations in footing height and timber dimensions. Galvanised steel construction resists corrosion, while elevated bases help reduce moisture contact. Pre‑drilled holes support fast, accurate fixing to concrete. A practical, professional solution where speed, adjustability and a tidy finish are important across multiple posts.
-
Blacktown Building Supplies Pryda Post Support Centre Pin Base 130mm Anchor
The Pryda 130mm centre pin base post anchor provides a simple, secure method of fixing timber posts to concrete footings. The central pin locates the base during installation, while the galvanised steel construction offers corrosion resistance for exterior use. Suitable for decks, pergolas and balustrades, it elevates the post above the footing to improve drainage and durability. Designed for quick, accurate placement and dependable restraint, it delivers a clean, professional finish in residential and light commercial projects.
-
Blacktown Building Supplies Pryda Post Support Half Stirrup 130mm
This Pryda half stirrup post support with a 130mm leg is ideal for securing timber posts in concrete where one‑sided access is required. The galvanised steel stirrup provides strong lateral restraint and bolt‑through fixing while keeping the post raised from the footing to reduce moisture contact. Suited to pergolas, screens and light structures, the compact leg assists with accurate setting and alignment. A practical, durable solution delivering a tidy, professional finish.
-
Blacktown Building Supplies Pryda Post Support Half Stirrup 200mm
The Pryda half stirrup with a 200mm leg offers increased embedment depth for enhanced stability in concrete footings. Ideal where one‑sided clamping is required, it provides strong lateral restraint and elevates the post to assist longevity. The galvanised finish resists corrosion for outdoor applications. Use with pergolas, verandahs, and feature screens where deeper set‑down and accurate alignment are needed, and a clean, professional result is expected.
-
Blacktown Building Supplies Pryda Post Support Half Stirrup 300mm
This Pryda 300mm leg half stirrup delivers deep embedment for maximum stability in concrete footings while providing one‑sided clamping. The galvanised steel construction resists corrosion and lifts the post clear of the footing to reduce moisture exposure. Ideal for demanding sites, taller structures or softer ground conditions, it ensures dependable restraint and a neat, professional finish. Suitable for pergolas, verandahs, decks and structural landscaping projects.
-
Blacktown Building Supplies Pryda Post Support Half Stirrup 65mm
The Pryda half stirrup with 65mm leg is a compact solution for shallow footings or tight installations. Designed for one‑sided clamping, it provides secure restraint and elevates the post to assist with drainage and durability. Made from galvanised steel for corrosion resistance, it’s suitable for small pergolas, screens and light structures. Use where minimal embedment is required while still achieving a tidy, professional result and reliable long‑term performance.
-
Builders Mitre 10 Pryda Strap Brace Tensioner & Bolt
The Pryda Strap Brace Tensioner with Bolt enables precise tightening and adjustment of bracing straps in timber framing. It helps remove slack and achieve correct tension for improved structural performance. Durable construction and straightforward installation make it ideal for residential builds and renovations. Use with Pryda strap bracing to simplify setup, alignment, and final tensioning on site.
-
Builders Mitre 10 Pryda Strap Brace Tensioner & Wing Nut - 30 Box
This box of 30 Pryda Strap Brace Tensioners with wing nuts provides an efficient solution for tightening bracing straps. The wing nut allows quick adjustment without tools, improving productivity and control. Ideal for residential framing, it ensures consistent bracing tension and alignment. Use with Pryda strap systems to deliver reliable structural performance and simplified installation across multiple jobs.
-
Builders Mitre 10 Pryda Timber Connector Nail Gal 35x3.15mm 500g Carton 5
Pryda 35 x 3.15mm galvanised Timber Connector Nails are purpose‑made for Pryda metal connectors. Supplied as 500g packs in a carton of 5, they provide consistent shank and head sizing for reliable engagement in pre‑punched holes. Galvanised protection supports indoor and sheltered outdoor applications. A practical trade carton for framing, decking, and general carpentry requiring approved connector nails.
-
Builders Mitre 10 Pryda Timber Connector Screw 12G x 35mm Hex Head Pack 50
Pryda 12G x 35mm hex head timber connector screws are engineered for secure fixing of brackets, straps and timber connectors. The hex head design provides positive drive and high installation torque, while the coarse thread delivers strong pull-out resistance in softwood and hardwood. Supplied in a convenient pack of 50 for site efficiency. Ideal for framing, truss installation and general timber construction where reliable, consistent performance is essential.
-
Builders Mitre 10 Pryda Triple Grip A-Pf/L SS
The Pryda stainless steel Left Hand Triple Grip provides robust tie-down and bracing for timber framing in coastal and corrosive environments. Its durable stainless construction resists rust and ensures long service life outdoors. Precision-formed for accurate, repeatable installation, it enhances racking resistance and joint integrity. Suitable for rafters, joists and studs where a left-hand orientation is required. Use with compatible Pryda nails or screws for optimal performance and compliance.
-
Builders Mitre 10 Pryda Triple Grip A-Pf/R SS
The Pryda stainless steel Right Hand Triple Grip delivers strong mechanical fixing for timber connections, ideal for coastal, marine or high-moisture locations. Its corrosion-resistant stainless construction ensures long-term durability and reliability. Designed for quick, accurate installation, it improves uplift and racking resistance in framing. Use on rafters, trusses and studs where right-hand orientation is specified. Install with Pryda-approved fasteners for best results and lasting structural performance.
-
Builders Mitre 10 Pryda Triple Grip Left Hand
The Pryda Left Hand Triple Grip is a high-strength timber connector for securing rafters, joists and studs in residential and light commercial framing. Its formed-steel design provides excellent bracing and uplift resistance, improving overall frame rigidity. Quick to install with nails or screws, it ensures accurate, repeatable positioning on left-hand connections. Ideal for general construction, renovations and additions where dependable timber joint reinforcement is required and corrosion conditions are moderate.
-
Builders Mitre 10 Pryda Triple Grip Right Hand
The Pryda Right Hand Triple Grip offers robust reinforcement for timber-to-timber connections, improving racking resistance and tie-down performance in framing. Its precision-formed steel profile enables quick, consistent installation on right-hand joints. Suitable for rafters, trusses and wall studs in residential and light commercial builds. Use with appropriate Pryda nails or screws for reliable structural performance. An ideal choice for general construction where durable, easy-to-install timber connectors are required.
-
Builders Mitre 10 Pryda Unitie 170 x 32mm Left Hand
The Pryda 170 x 32mm Left Hand Unitie bracket provides compact, high-strength reinforcement for timber connections where space is limited. Its formed steel design delivers strong tie-down and bracing performance with fast, accurate installation. Ideal for joists, rafters and studs requiring left-hand orientation. Compatible with Pryda nails or screws, it ensures reliable holding power in general residential and light commercial construction. Suitable for internal and sheltered applications where durable steel connectors are needed.
-
Builders Mitre 10 Pryda Unitie 170 x 32mm Right Hand
The Pryda 170 x 32mm Right Hand Unitie bracket is a compact, high-strength timber connector for reinforcing joints in framing. Designed for quick, precise right-hand installations, it enhances tie-down and bracing performance in tight spaces. Ideal for joists, rafters and studs in residential builds. Install with compatible Pryda nails or screws for dependable load transfer. Best suited to internal or sheltered locations where a robust, easy-to-use connector is required.
-
Blacktown Building Supplies Pryda Unitie Left Hand 170 x 32mm
The Pryda Unitie (Left Hand) 170 x 32mm is a galvanised steel framing tie for securing timber members at critical joints. Ideal for joists, trimmers and light framing connections, it helps resist movement and improves load transfer. The left‑hand orientation suits mirrored installations when paired with the right‑hand version. Pre‑punched holes enable quick, accurate fixing. Use in floors, decks and general carpentry where a compact, reliable tie is needed for a neat, professional finish.
-
Blacktown Building Supplies Pryda Unitie Right Hand 170 x 32mm
The Pryda Unitie (Right Hand) 170 x 32mm is a durable, galvanised framing tie designed to reinforce timber junctions and restrain movement. Perfect for joists, trimmers and light framing, it delivers consistent performance with pre‑punched holes for fast installation. Pair with the left‑hand version for mirrored connections. Suitable for decks, floors and general carpentry, it provides a compact, professional solution where dependable strength and corrosion resistance are important.
-
Builders Mitre 10 Pryda Universal H/D Ang SS 40 x 40 x 230mm
Pryda’s 40 x 40 x 230mm stainless steel Universal Heavy Duty Angle provides strong, versatile bracing and fixing for timber and light steel framing in harsh environments. The stainless construction resists corrosion, making it ideal for coastal and outdoor applications. Pre-punched holes allow fast, accurate installation with nails, screws or bolts. Use for shelves, frames, posts and brackets where a durable, high-capacity angle connection is required in construction and maintenance projects.
-
Ark Building Supplies Right-Hand Triple Grip Timber Connector – Pre-Punched for Framing
Right-hand triple grip timber connector for fixing joists, trusses, and studs to plates or beams where a handed bracket is required. Pre-punched nail holes ensure accurate positioning and efficient installation, providing reliable uplift and lateral load transfer in timber framing. Ideal for housing, decks, pergolas, and general carpentry. Install with specified nails or screws and comply with local codes and engineering requirements for spacing and capacity.
-
Builders Mitre 10 Screw Joist Hanging RW20 Zinc 5x35mm Box 250
Zinc plated 5 x 35 mm RW20 joist hanger screws provide a strong, secure fixing for timber connectors and metal hardware. The specialised head profile improves bit engagement and reduces cam-out, speeding installation. Suitable for interior or sheltered environments where corrosion risks are low. Supplied in a bulk box of 250 for efficient framing and decking work with minimal downtime.
-
Builders Mitre 10 Simpson Strong-Tie Concealed Post Base Suits 90mm to 100mm Square Posts
This Simpson Strong-Tie concealed post base securely anchors 90–100mm square posts while maintaining a clean, hidden look above deck. Engineered for heavy-duty performance, it offers excellent uplift and lateral load resistance with high-corrosion protection from its galvanised finish. Ideal for decks, pergolas, verandas, and architectural timber features where appearance matters. Compatible with common fixings and installation methods, it simplifies alignment and enhances durability. Use with treated timber and follow Simpson Strong-Tie installation guidelines for code-compliant, professional results in outdoor structures.
-
Swadlings Timber & Hardware Split Joist Hanger – Pair – Pryda Framing Brackets for Timber Joists
This pair of Pryda split joist hangers allows easy installation where access is limited or joists are already in place. Each side fixes independently to the supporting member, then to the joist, delivering strong load transfer without heavy end bearing. Manufactured from galvanised steel for corrosion resistance, the split design is ideal for renovations, repairs and tight locations. Pre‑punched holes speed up fixing and ensure consistent positioning. Suitable for decks, floors and general timber framing where a neat, dependable connection is required.
-
Builders Mitre 10 Stud Tie Single Sided LH Gal Vuetrade 240x60x32
Vuetrade single-sided LH stud tie for securing studs to plates or lintels, enhancing tie-down and bracing in timber framing. Galvanised steel resists corrosion for long service life. The 240 x 60 x 32mm profile is pre-punched for quick installation with nails or screws. Left-hand orientation simplifies correct placement in mirrored assemblies. Ideal for improving uplift and lateral resistance in residential wall frames. A robust, easy-to-fit connector for compliant framing practice.
You have seen 432 out of 487 products
