FRP Accessories
-
Reo Point Expansion Joint 75mmx2.4mtr
This 2.4m x 75mm expansion joint filler strip offers versatile compressible separation for a broad range of slab and pavement applications. It accommodates thermal and drying shrinkage movement to reduce cracking and spalling, while delivering a consistent, neat joint line. Clean to cut and easy to place, it supports site productivity and effective sealant installation where specified. Ideal for residential and commercial slabs, footpaths and kerbs, enhancing durability and appearance of finished concrete works.
-
Sydney Hardware Expansion Joint Bituman - 100mm / 2.4 mts
Compressible bitumen-impregnated fibreboard filler for forming expansion joints in concrete. This 100mm x 2.4m board accommodates thermal movement, reducing slab edge spalling and cracking. Weather-resistant and rot-proof, it’s ideal for driveways, footpaths, pavements, structural slabs and concrete abutments. Install vertically between pours or against adjoining structures and seal the top with a compatible sealant for a neat, waterproof finish. Easy to cut onsite to height and width as required.
-
Sydney Hardware Expansion Joint Bituman - 125mm / 2.4 mts
Durable, compressible bitumen-impregnated fibreboard for expansion joints in concrete slabs. The 125mm x 2.4m size suits wider joints and interfaces to accommodate thermal movement and relieve stress. Ideal for driveways, pavements, industrial slabs and abutments. Rot-proof and weather-resistant for long-term performance. Install between pours or against structures, then seal the joint top with a suitable sealant to prevent debris and water ingress. Easy to trim onsite for a precise fit.
-
Sydney Hardware Expansion Joint Bituman - 150mm / 2.4 mts
Heavy-duty bitumen-impregnated fibreboard expansion joint filler for concrete construction. The 150mm x 2.4m board provides compressible separation to accommodate thermal and drying shrinkage movement, reducing cracking and edge damage. Suitable for pavements, industrial slabs, bridge approaches and abutments. Weather-resistant, rot-proof and easy to cut to suit site conditions. Install vertically and finish with a compatible sealant to maintain joint integrity and improve durability in service.
-
Sydney Hardware Expansion Joint Bituman - 50mm / 2.4 mts
Compact bitumen-impregnated fibreboard expansion joint filler for concrete slabs and paths. This 50mm x 2.4m strip is ideal for narrow joints and perimeter isolation against walls or upstands. Provides compressible movement capacity to reduce cracking and improve slab durability. Weather-resistant and rot-proof for long-term performance. Quick to cut and install; seal the joint top with a suitable sealant to exclude water and debris for a clean, professional finish.
-
Sydney Hardware Expansion Joint Bituman - 75mm / 2.4 mts
Reliable bitumen-impregnated fibreboard for forming expansion joints in concrete. The 75mm x 2.4m board balances ease of handling with ample movement capacity, making it suitable for driveways, footpaths, pavements and slabs-on-ground. Rot-proof, weather-resistant and simple to trim onsite for height. Install between concrete pours or at abutments and seal the joint top with a compatible sealant to protect against water ingress and debris, maintaining long-term performance.
-
Sydney Hardware Expansion Joint Foam Abel - 100mm / 25 mts
Closed-cell polyethylene expansion joint foam for forming compressible joints in concrete pavements, slabs and perimeter isolation joints. Supplied as a 100mm x 25m roll for efficient coverage and easy handling. Non-absorbent, flexible and lightweight, it allows movement while reducing stress transfer and cracking. Compatible with most sealants and simple to cut for custom widths. Ideal for driveways, footpaths, precast interfaces and control joints in general construction under Australian conditions.
-
Sydney Hardware Expansion Joint Foam Abel - 100mm / 6 mts
Compact 100mm x 6m roll of closed-cell polyethylene foam for forming expansion and isolation joints in concrete works. Provides reliable compressibility and water resistance, enabling slabs to expand and contract without edge damage. Lightweight and easy to trim, it installs quickly and pairs well with joint sealants for a clean finish. Ideal for small projects, maintenance tasks and detail work around columns, walls and penetrations in residential and commercial sites.
-
Sydney Hardware Expansion Joint Foam Abel - 100mm adhesive / 25 mts
Closed-cell polyethylene expansion joint foam with a convenient self-adhesive edge for rapid placement. The 100mm x 25m roll adheres directly to formwork or substrates, reducing fixings and speeding installation. Provides compressibility and water resistance to accommodate slab movement and prevent cracking. Ideal for pavements, driveways, perimeter isolation and precast interfaces. Clean, easy cutting and compatibility with most joint sealants make it a versatile choice for fast, tidy concrete works.
-
Sydney Hardware Expansion Joint Foam Abel - 125mm / 25 mts
Closed-cell polyethylene foam jointing material for concrete expansion and isolation joints. The 125mm x 25m roll offers increased width for wider joints or variable depths. Flexible, non-absorbent and easy to cut, it accommodates slab movement while maintaining joint integrity. Suitable for pavements, industrial slabs, walls and precast interfaces. Compatible with commonly used sealants and adhesives for clean detailing. Designed for quick installation and reliable performance in Australian site conditions.
-
Sydney Hardware Expansion Joint Foam Abel - 125mm / 6 mts
Handy 125mm x 6m roll of closed-cell polyethylene expansion joint foam for smaller projects or repairs. Provides compressibility and resilience to control slab movement and reduce cracking. Non-absorbent and easy to trim, it installs neatly at construction joints, abutments and perimeters. Suitable for use with most joint sealants for a professional, durable finish. Ideal for driveways, paths, and detail work where wider joints or isolation are required.
-
Sydney Hardware Expansion Joint Foam Abel - 150mm / 25 mts
High-coverage 150mm x 25m roll of closed-cell polyethylene foam for concrete expansion and isolation joints. Wide format suits larger joints, deep forms and variable depths. Lightweight, flexible and non-absorbent, it allows controlled movement while maintaining joint shape. Easy to cut and fit, with compatibility across common sealant systems. Ideal for industrial slabs, pavements, edge isolation and precast construction where reliable compressibility and clean detailing are essential.
-
Sydney Hardware Expansion Joint Foam Abel - 150mm / 6 mts
Wide-format closed-cell polyethylene foam for expansion and isolation joints in concrete. The 150mm x 6m roll provides flexibility for detail work and smaller tasks while offering generous width for deep or irregular joints. Non-absorbent and easily trimmed for custom sizing. Suitable for pavements, slabs-on-ground, perimeter isolation and precast interfaces. Works with most joint sealants to deliver a neat, durable finish across residential and commercial projects.
-
Sydney Hardware Expansion Joint Foam Abel - 200 mm / 25 mts / 25 mts
Extra-wide 200mm x 25m closed-cell polyethylene expansion joint foam for large joints, deep sections and interface isolation. Flexible, non-absorbent and easy to cut to size, it accommodates slab movement and helps prevent cracking or edge damage. Suitable for heavy-duty pavements, industrial slabs, tilt-up construction and wall joints. Compatible with most sealants for a clean, professional finish. Designed for fast installation and dependable performance on civil and building sites.
-
Sydney Hardware Expansion Joint Foam Abel - 200mm / 25 mts
Closed-cell polyethylene foam roll for forming expansion and isolation joints in concrete works. The 200mm x 25m size provides excellent coverage for wide joints or deep sections. Lightweight, compressible and water-resistant, it supports slab movement and maintains joint integrity. Easily cut to custom widths and compatible with commonly specified sealants. Ideal for industrial slabs, pavements, precast interfaces and perimeter isolation in Australian construction environments.
-
Sydney Hardware Expansion Joint Foam Abel - 250mm / 25 mts
Ultra-wide 250mm x 25m closed-cell polyethylene expansion joint foam for deep or oversized joints and isolation details. Provides reliable compressibility, resilience and water resistance, supporting slab movement to minimise cracking. Quick to cut and install with clean, straight edges. Suitable for civil works, industrial slabs, pavements and wall interfaces. Pairs effectively with joint sealants to deliver a durable, professional finish on large-scale projects and complex details.
-
Sydney Hardware Expansion Joint Foam Abel - 300mm / 25 mts
Extra-large 300mm x 25m roll of closed-cell polyethylene foam for substantial expansion and isolation joints. Ideal for deep sections, tilt-up construction, slab-edge isolation and complex interfaces. Non-absorbent, flexible and easy to cut for custom sizing. Maintains joint integrity by accommodating thermal and shrinkage movement. Compatible with a wide range of sealants for a neat, long-lasting finish. Designed for rapid installation and dependable performance in demanding site conditions.
-
Sydney Hardware Expansion Joint Foam Abel - 50mm / 25 mts
Closed-cell polyethylene expansion joint foam supplied in a 50mm x 25m roll for efficient joint formation in concrete slabs and paths. Provides compressibility and resilience to manage slab movement and reduce cracking. Lightweight, easy to cut and install, and compatible with most joint sealants for clean detailing. Ideal for driveways, footpaths, perimeter isolation and control joints in a range of residential and commercial applications.
-
Sydney Hardware Expansion Joint Foam Abel - 50mm / 6 mts
Convenient 50mm x 6m roll of closed-cell polyethylene foam for forming expansion and isolation joints in concrete works. Flexible, compressible and non-absorbent to accommodate movement and protect slab edges. Simple to cut and position for neat joint lines. Suitable for small projects, repairs and detail work around walls, columns and penetrations. Compatible with common sealant systems to achieve a tidy, durable finish.
-
Sydney Hardware Expansion Joint Foam Abel - 75mm / 25 mts
Reliable closed-cell polyethylene foam for forming concrete expansion and isolation joints. The 75mm x 25m roll provides excellent coverage and easy handling. Compressible, non-absorbent and simple to cut, it supports slab movement while maintaining joint shape. Ideal for driveways, footpaths, slabs-on-ground and precast interfaces. Works with most joint sealants to deliver a clean, professional finish across residential and commercial projects in Australian conditions.
-
Sydney Hardware Expansion Joint Foam Abel - 75mm / 6 mts
Handy 75mm x 6m roll of closed-cell polyethylene expansion joint foam for small runs and detailed work. Provides compressibility and resilience to accommodate slab movement, reducing cracking and edge damage. Non-absorbent and easy to trim for precise fits. Suitable for driveways, paths, perimeter isolation and joints around walls or penetrations. Compatible with common sealant systems for long-lasting performance and neat joint finishing.
-
Pronto Building Supplies Foamjoint 100mm × 10 × 25m
Closed‑cell polyethylene Foamjoint sized 100mm × 10mm × 25m for expansion joints in concrete slabs, pavements, and kerbs. Lightweight, water‑resistant, and compressible, it accommodates movement without absorbing moisture. Easy to cut and fix, providing neat arrises for sealant application. Suitable for residential and commercial works. Store flat and protected from UV prior to installation. Install per joint design and seal with compatible sealant where specified for long‑lasting performance.
-
Reo Point Foamjoint 100mmx10mmx25mtr
This 25m roll of closed-cell foam expansion joint, 100mm wide and 10mm thick, provides a compressible interface for concrete slabs, pavements and isolation joints. Non-absorbent and clean to cut, it accommodates movement to reduce cracking and spalling while creating a uniform joint ready for sealing where specified. Lightweight and easy to install, it improves productivity and finish quality across residential, commercial and civil projects, supporting long-term durability and performance of concrete works.
-
Pronto Building Supplies Foamjoint 125mm × 10 × 25m
Foamjoint closed‑cell polyethylene strip 125mm × 10mm × 25m for flexible movement joints in slabs and pavements. Non‑absorbent and compressible, it maintains joint function and supports sealant installation. Simple to cut and place along joint lines. Suitable for kerbs, driveways, paths, and general slab construction. Store out of direct sunlight. Install to project specifications and use compatible sealants as required to ensure durable, watertight, and clean joint finishes.
-
Pronto Building Supplies Foamjoint 150mm × 10 × 25m
Closed‑cell polyethylene Foamjoint measuring 150mm × 10mm × 25m for expansion joints in concrete. Provides reliable compressibility and moisture resistance, helping maintain joint integrity and sealant performance. Cuts and installs easily along joint lines. Ideal for pavements, slabs, and kerb works. Store protected from weather and UV. Follow joint design details and use compatible sealants for best results, ensuring long‑term durability and a neat, serviceable finish.
-
Reo Point Foamjoint 150mmx10mmx25mtr
This 25m roll of closed-cell foam expansion joint, 150mm wide by 10mm thick, provides a resilient separation layer for larger slabs, pavements and perimeters. The non-absorbent foam accommodates thermal and shrinkage movement to protect edges and maintain joint integrity. Easy to trim and place, it supports fast installation and neat, consistent joints ready for sealant if required. Ideal for driveways, industrial floors and commercial slabs, enhancing durability and service life.
-
Pronto Building Supplies Foamjoint 200mm × 10 × 25m
Foamjoint expansion filler 200mm × 10mm × 25m made from closed‑cell polyethylene for wide concrete joints. Compressible, non‑absorbent, and easy to cut, it accommodates movement and prepares joints for sealant. Suitable for slabs, pavements, and structural movement details. Store flat and out of sunlight prior to use. Install to required dimensions and seal with compatible products as specified. Follow construction best practice for durable, watertight joints and clean finishes.
-
Reo Point Foamjoint 200mmx10mmx25mtr
This 25m roll of closed-cell foam expansion joint, 200mm wide and 10mm thick, offers a robust compressible buffer for large slabs, pavements and isolation joints. The resilient, non-absorbent material accommodates concrete movement, reducing cracking and edge damage. Clean cutting and easy handling help deliver straight, uniform joints and efficient sealing where specified. Suitable for industrial floors, roadways and commercial projects, it improves overall performance and longevity of concrete works.
-
Pronto Building Supplies Foamjoint 300mm × 10 × 25m
Closed‑cell polyethylene Foamjoint sized 300mm × 10mm × 25m for extra‑wide expansion joints in concrete works. Provides compressible, water‑resistant joint filler that supports sealant application. Cuts easily for neat placement along joint lines. Suitable for pavements, large slabs, and structural movement joints. Store protected from UV and weather prior to installation. Install to project specifications and seal with compatible sealants for durable, serviceable, and clean joint performance.
-
Pronto Building Supplies Foamjoint 50mm × 10 × 25m
Foamjoint 50mm × 10mm × 25m closed‑cell polyethylene expansion filler for narrow concrete joints. Non‑absorbent and compressible, it accommodates movement and readies edges for sealant. Quick to cut and install. Ideal for footpaths, driveways, and kerb construction. Store flat and away from direct sunlight. Install as per joint design and seal with compatible sealants where specified. Follow good practice to ensure durable, watertight, and neatly finished movement joints.
-
Reo Point Foamjoint 50mmx10mmx25mtr
This 25m roll of closed-cell foam expansion joint, 50mm wide by 10mm thick, is ideal for narrower joints, perimeter separations and detail interfaces. It compresses to absorb movement, reducing stress and protecting edges from spalling. Lightweight and simple to trim, it speeds installation and creates a consistent joint line suitable for sealants where required. Use in footpaths, small slabs and kerb applications to enhance finish quality and long-term durability of concrete elements.
-
Pronto Building Supplies Foamjoint 75mm × 10 × 25m
Closed‑cell polyethylene Foamjoint 75mm × 10mm × 25m for expansion joints in concrete slabs and pavements. Provides compressibility, moisture resistance, and clean joint faces for sealants. Easy to cut and place. Suitable for residential and commercial projects including kerbs and footpaths. Store protected from UV until use. Install to required joint geometry and finish with compatible sealants as specified to achieve durable, weather‑resistant, and tidy joint details.
-
Reo Point Foamjoint 75mmx10mmx25mtr
This 25m roll of closed-cell foam expansion joint, 75mm wide and 10mm thick, provides a versatile compressible layer for concrete slabs, pavements and isolation joints. Non-absorbent and easy to cut, it accommodates thermal and shrinkage movement, reducing cracking and joint deterioration. The product installs quickly to form neat, uniform joints ready for sealant application where specified. Suitable for residential and commercial works, it supports improved durability and appearance of finished concrete surfaces.
-
Reo Point Foamjoint Adh 100mmx10mmx25mtr
This adhesive-backed closed-cell foam expansion joint roll, 25m long by 100mm wide and 10mm thick, simplifies placement on formwork and substrates by holding position during pours. The compressible, non-absorbent foam accommodates slab movement to reduce cracking and edge damage. Quick to trim and apply, it produces straight joints and supports sealant application where required. Ideal for pavements, slabs-on-ground and perimeter isolation joints in residential and commercial construction.
-
Reo Point Foamjoint Adh 150mmx10mmx25mtr
This 25m adhesive-backed closed-cell foam expansion joint, 150mm wide by 10mm thick, adheres to formwork and surfaces for faster, more accurate installation. The resilient, non-absorbent foam absorbs thermal and shrinkage movement, protecting concrete edges and maintaining joint integrity. Clean to cut and place, it forms uniform joints and supports sealant application. Use on industrial floors, driveways and commercial slabs to improve durability and finish quality while saving installation time.
-
Reo Point Foamjoint Adh 200mx10mx25m
This adhesive-backed closed-cell foam expansion joint roll, 25m long and 200mm wide by 10mm thick, provides a secure, fast-install compressible interface for larger slabs and pavements. The self-adhesive backing holds the jointing in place during pours, reducing fixings and rework. Non-absorbent foam accommodates movement to minimise cracking and spalling. Easy to trim for neat joints, it supports sealant application where specified and improves overall performance of concrete works on demanding projects.
-
Reo Point Foamjoint Adh 50mmx10mmx25mtr
This 25m adhesive-backed closed-cell foam expansion joint, 50mm wide by 10mm thick, is perfect for narrow joints and perimeter separations where precise placement is essential. The self-adhesive strip speeds installation by holding the joint in position on formwork or substrates. Its compressible, non-absorbent foam accommodates movement to reduce cracking and edge damage. Clean to cut and apply, it creates neat joints ready for sealing, enhancing durability and finish quality.
-
Reo Point Foamjoint Adh 75mmx10mmx25mtr
This 25m roll of adhesive-backed closed-cell foam expansion joint, 75mm wide by 10mm thick, provides a quick, secure jointing solution for slabs and pavements. The self-adhesive backing allows rapid placement and alignment, minimising fixings. The compressible foam accommodates concrete movement to protect edges and maintain joint integrity. Easy to trim and suitable for sealant application, it enhances productivity and long-term performance across residential and commercial concrete works.
-
Pronto Building Supplies Foamjoint Dasco Sticky 100mm
Dasco Sticky Foamjoint in 100mm width features a self‑adhesive backing for rapid installation to formwork or substrates. Closed‑cell polyethylene provides compressibility, water resistance, and neat joint edges for sealant application. Ideal for slabs, driveways, and kerbs. Simply cut to length, peel, and place. Store clean, flat, and out of sunlight. Install to project specifications and seal as required with compatible sealants for long‑lasting movement accommodation.
-
Pronto Building Supplies Foamjoint Dasco Sticky 200mm
Dasco Sticky Foamjoint in 200mm width provides a self‑adhesive, closed‑cell polyethylene expansion joint solution for wide concrete joints. Fast to position, compressible, and resistant to water absorption, it supports reliable sealant performance. Ideal for pavements and large slabs. Cut to size, peel backing, and apply to clean surfaces. Store flat and protected from UV. Install to required dimensions and finish with compatible sealants for durable, neat joints.
$115.50
-
Pronto Building Supplies Foamjoint Dasco Sticky 300mm
Dasco Sticky Foamjoint in 300mm width is a self‑adhesive closed‑cell polyethylene joint filler for extra‑wide concrete expansion joints. Provides compressibility and moisture resistance with quick, clean installation. Suitable for pavements, industrial slabs, and structural movement joints. Cut to length, peel the release liner, and apply to clean, dry surfaces. Store flat and out of sunlight. Install in accordance with joint design and complete with compatible sealants for best results.
$170.50
-
Reo Point Galvanised Tie Wire
Galvanised tie wire is a versatile, corrosion-resistant wire for tying reinforcing bars, mesh and formwork. It twists easily yet holds securely, speeding installation while maintaining alignment during pours. Suitable for construction, fencing and general fixing, it performs well in outdoor and damp environments. Compatible with standard tie wire pliers and dispensers, it supports fast, tidy work on site. Use wherever reliable, rust-resistant tying and bundling is required across residential and commercial projects.
-
Reo Point Galvanised Tie Wire Coil
This galvanised tie wire coil provides a bulk supply of corrosion-resistant wire for securing rebar, mesh and formwork. The durable galvanised finish withstands harsh site conditions, while the pliable wire allows fast twisting and strong holds. Ideal for high-volume construction tasks, it suits use with dispensers and tie wire tools to improve productivity. Also useful for fencing, bundling and general fixing where robust, weather-resistant tying is required across civil, commercial and residential works.
-
Reo Point Handy Roll Black 2x200x10m
This handy roll of black builders film measures 2m x 10m at 200 micron thickness, offering a heavy duty polyethylene barrier and protection sheet for construction sites. Use as a moisture barrier under slabs, temporary weather protection, spill containment or general surface protection during works. Tough yet flexible, it is easy to cut and tape, helping keep sites clean and compliant. Suitable for residential, commercial and renovation projects requiring reliable plastic sheeting.
-
Reo Point Key Joint 100mmx3m
This 3m galvanised steel key joint, 100mm high, forms straight, stable construction joints in slabs-on-ground while promoting controlled cracking and load transfer. The keyed profile aligns adjoining pours and supports a clean, professional joint line. Galvanised protection resists corrosion in exposed environments. Compatible with common dowel sleeves and stakes, it speeds set-out and reduces formwork time. Ideal for industrial floors, driveways and commercial slabs seeking durable, accurate joint detailing and long-term performance.
-
Reo Point Key Joint 200mmx3m
This 200mm x 3m concrete key joint provides a straight, stable edge to create clean, uniform control joints in slabs. Designed to reduce random cracking, it ensures accurate alignment across pours and simplifies set-out on site. Lightweight and easy to handle, it speeds installation and delivers a professional finish. Ideal for driveways, shed slabs, pathways and industrial floors, it supports consistent slab thickness and joint spacing. Use with standard stakes or pins to maintain line and level for reliable concrete placement and finishing.
-
Reo Point Key Jont 150mmx3m
The 150mm x 3m concrete key joint forms precise control joints for small to medium slabs, helping control shrinkage cracking and improve slab performance. Its straight, stable edge assists with accurate alignment and consistent slab thickness across multiple pours. Easy to cut and handle on site, it suits paths, patios, driveways and light commercial floors. Use with stakes or pins to maintain line and level during placement. A reliable, cost-effective solution for creating professional-looking joints and faster, cleaner finishing.
-
Reo Point Loop (bag) ties 150mm
These 150mm loop (bag) ties provide a fast, secure way to bundle and tie reinforcement, mesh, form liners and site materials. The looped ends allow use with a tie tool or by hand for quick installation, helping speed productivity on site. Durable wire construction ensures reliable hold and easy twist-off after placement. Ideal for formwork assembly, rebar cages, fencing and general bundling tasks. A versatile, cost-effective consumable for contractors seeking consistent, tidy results and reduced setup time across multiple applications.
You have seen 240 out of 313 products
