Steel Reo Bar
-
Reo Point N12 Z Bar 600x350x300
This N12 Z Bar with 600 x 350 x 300 mm legs suits asymmetric step transitions and complex edge detailing. Deformed ribbed steel promotes strong bond and load transfer, supporting crack control and structural continuity. Pre-bent fabrication ensures dimensional accuracy and reduces site labour compared to manual bending. Use in slabs, footings, stairs, edge beams and blockwork cores where tailored Z geometry is required. A convenient, dependable reinforcing component for efficient installation and consistent results.
-
Reo Point N16 Bar 1mtr Long
Straight N16 deformed reinforcing bar cut to 1000 mm length for convenient use in slabs, footings, beams and general concrete works. The ribbed profile delivers excellent bond to concrete, improving load transfer and crack control. Ready to use on site for dowels, starters, tie-ins and custom bends. Ideal for residential and commercial projects requiring reliable, high-strength reinforcement in a manageable size. A versatile stock length that reduces cutting waste and speeds up installation.
-
Reo Point N16 Bar 600 long
N16 deformed reinforcing bar supplied at 600 mm length for quick, versatile use in concrete construction. The ribbed surface enhances bond and anchorage, supporting structural performance in slabs, edge beams, footings and wall starters. Convenient for dowels, stitch bars, tie-ins and small custom bends. A practical short length that reduces on-site cutting, speeds installation and minimises waste. Suitable for residential and light commercial concrete applications requiring dependable reinforcement.
-
Reo Point N16 Hook 120x600
Pre-bent N16 Hook Bar with 120 x 600 mm legs delivers reliable anchorage in footings, slabs and wall starter details. The hook profile provides positive mechanical interlock, while deformed ribs maximise concrete bond. Factory bending ensures consistent dimensions and reduces site labour. Ideal for hold-downs, starter bars, tie-ins and reinforcement terminations where a hooked end is specified. A ready-to-install solution that improves accuracy, speeds setup and supports structural integrity.
-
Reo Point N16 Hook 120x700
This N16 Hook Bar features 120 x 700 mm legs for increased embedment and anchorage. The hooked configuration enhances mechanical grip within concrete, and the deformed rib pattern promotes strong bond. Supplied pre-bent for accuracy, it saves time on site and ensures repeatable results. Use for slab starters, footing anchors, hold-downs and reinforcement terminations. A robust, practical component for efficient installation and consistent performance in concrete works.
-
Reo Point N16 Hook 150x650
N16 Hook Bar with 150 x 650 mm legs provides dependable embedment and anchorage in slabs, beams and footings. The hook detail delivers positive mechanical interlock, while deformed ribs enhance bond with concrete. Factory-bent for consistency, it reduces on-site fabrication time and errors. Ideal for starter bars, hold-downs, tie-ins and reinforcement terminations specified with hooked ends. A time-saving, ready-to-use reinforcing component for residential and commercial projects.
-
Reo Point N16 Hook 150x700
This pre-bent N16 Hook Bar, sized 150 x 700 mm, offers greater embedment for enhanced anchorage. The hooked profile and deformed ribbed surface maximise mechanical and adhesive bond in concrete. Supplied ready to install, it improves dimensional accuracy and saves on-site labour. Ideal for slab and footing starters, hold-downs, tie-ins and reinforcement terminations. A reliable component that streamlines installation and supports structural performance in a wide range of concrete applications.
-
Reo Point N16 L Bar 1200x200
Pre-bent N16 L Bar with 1200 x 200 mm legs is designed for corners, starters and anchorage details in slabs, beams and walls. The L shape provides strong mechanical interlock, while deformed ribs ensure excellent bond with concrete. Factory-formed bends improve accuracy and reduce on-site fabrication time. Use for slab-to-wall starters, edge reinforcement and step transitions. A practical, ready-to-install component that enhances structural continuity and speeds installation on residential and commercial sites.
-
Reo Point N16 L Bar 1200x300
This N16 L Bar features 1200 x 300 mm legs for increased embedment at corners, starters and tie-in points. The L configuration offers secure anchorage, and the deformed ribbed profile maximises bond to concrete. Delivered pre-bent for dimensional consistency, it reduces on-site labour and improves install speed. Ideal for slab-to-wall starters, edge beams and step footing details. A dependable, ready-to-use reinforcing solution for efficient, quality construction.
-
Reo Point N16 L Bar 600x600
N16 L Bar with equal 600 x 600 mm legs provides balanced anchorage for corners, starters and tie-ins. The L profile delivers positive interlock, while deformed ribs enhance concrete bond. Supplied pre-bent to precise dimensions, it saves site time and improves consistency compared with manual bending. Suitable for slab edges, footings, walls and retaining structures. A versatile reinforcing component that supports structural continuity and efficient installation across a range of concrete applications.
-
Reo Point N16 L Bar 900x300
This pre-bent N16 L Bar with 900 x 300 mm legs is ideal for slab-to-wall starters, edge reinforcement and step transitions. The L-shaped geometry offers secure anchorage, and the deformed rib pattern ensures excellent bond to concrete. Factory bending ensures consistent accuracy, reducing on-site labour and errors. A practical, ready-to-install reinforcement piece suitable for residential and light commercial concrete construction requiring reliable tie-ins and corner reinforcement.
-
Reo Point N16 V Bar 800x600
N16 V Bar with 800 x 600 mm legs provides a versatile solution for reinforcing transitions, step details and angled connections. The V profile assists with anchorage and load transfer through changes in direction or level. Deformed ribs maximise bond to concrete. Factory-formed bends ensure dimensional accuracy and save site time. Suitable for slabs, footings, stairs and retaining structures. A ready-to-use reinforcing component designed to improve consistency and installation efficiency.
-
Reo Point N16 Z Bar 600x185x600
This N16 Z Bar features 600 x 185 x 600 mm legs to deliver secure anchorage across slab transitions and step footings. The Z-shaped geometry enhances mechanical interlock, while deformed ribs promote excellent concrete bond. Supplied pre-bent for dimensional consistency, it reduces on-site fabrication and speeds installation. Ideal for footings, edge beams, slab-to-slab tie-ins and wall starters. A robust, ready-to-install reinforcement detail for efficient, reliable concrete construction.
-
Reo Point N16L Bar 1000x200
Pre-bent N16 L Bar with 1000 x 200 mm legs provides dependable anchorage at corners, starters and tie-ins. The L configuration ensures strong mechanical interlock, and the deformed ribs maximise concrete bond. Factory-formed bends deliver consistent accuracy and reduce site labour. Suitable for slab-to-wall starters, edge beams, footing steps and retaining wall connections. A practical, ready-to-use reinforcing component that enhances workmanship and speeds installation on site.
-
Reo Point N16L Bar 1400x200
N16 L Bar with 1400 x 200 mm legs offers extended embedment for starters, corners and tie-in details. The L shape provides positive anchorage, while the deformed ribbed surface improves bond and load transfer. Delivered pre-bent for precision, it saves time and improves consistency compared with on-site bending. Ideal for slab edges, walls, footings and retaining structures. A reliable reinforcing piece for efficient installation and structural continuity in concrete works.
-
Reo Point N16L Bar 800x200
This N16 L Bar with 800 x 200 mm legs is a compact solution for corner reinforcement, starters and tie-ins. The L profile delivers reliable anchorage, and deformed ribs enhance concrete bond. Supplied pre-bent for dimensional accuracy, it reduces on-site fabrication efforts and errors. Suitable for slabs, edge beams, footing steps and wall connections. A versatile, ready-to-install reinforcing component that supports efficient construction and consistent quality.
-
Builders Mitre 10 N20 Deformed Bar 20mm x 6M
20mm x 6m N20 deformed reinforcing bar with a ribbed profile for superior concrete bond. Suitable for footings, slabs, beams and general reinforcing in residential and commercial construction. High strength and dimensional accuracy support reliable placement, tying and lap splicing. Cut and bend with appropriate equipment and handle safely on site. Use as specified by engineering design and local requirements.
-
Reo Point N20 L Bar 1000x300
Pre-bent N20 L Bar with 1000 x 300 mm legs offers heavy-duty anchorage for starters, corners and structural tie-ins. The larger N20 diameter provides increased capacity, while deformed ribs maximise bond to concrete. Factory-formed bends ensure accuracy and reduce site labour. Ideal for slabs, footings, retaining walls and high-load connections. A robust, ready-to-use reinforcement component designed to improve installation speed, consistency and structural performance.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y12
Y12 Deformed Steel Reinforcing Bar provides reliable tensile reinforcement for concrete structures. The ribbed profile enhances bond to concrete, improving crack control and structural performance. Supplied in 6m lengths for easy handling on site, it’s ideal for slabs, footings, beams, and columns. Y12 (approx. 12mm diameter) is a versatile size for residential and commercial projects. Compatible with standard rebar accessories including chairs, ties, and couplers. Store off the ground and protect from contaminants to maintain steel integrity prior to placement.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y12 Galvanized
Galvanized Y12 Deformed Reinforcing Bar offers enhanced corrosion resistance for concrete elements exposed to moisture or marine environments. The ribbed profile ensures superior bond to concrete, aiding crack control and structural performance. Supplied in 6m lengths, it suits slabs, beams, footings, and columns in residential and commercial works. Y12 (approx. 12mm diameter) is a practical, widely specified size. Use with compatible bar chairs, ties, and accessories. Handle carefully to avoid zinc coating damage and follow best practices for placement.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y16
Y16 Deformed Steel Reinforcing Bar is designed for robust reinforcement in concrete structures. The ribbed geometry improves mechanical interlock, enhancing bond and crack control. At approximately 16mm diameter and 6m long, Y16 is suited to higher load elements such as footings, beams, and suspended slabs. Compatible with standard bar chairs, ties, and couplers for efficient fixing. Ensure proper cover and placement practices to maximise durability and performance. Store clean and dry prior to installation to prevent contamination or corrosion.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y16 Galvanized
Galvanized Y16 Deformed Reinforcing Bar provides increased durability in aggressive or coastal environments. The ribbed profile enhances bond to concrete while the zinc coating offers corrosion protection. Supplied in 6m lengths, the 16mm diameter bar suits high-load members including beams, footings, and slabs. Use with compatible rebar accessories and maintain coating integrity during handling. Follow appropriate detailing and concrete cover requirements for galvanised reinforcement to ensure long-term structural performance and reduced maintenance in exposed conditions.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y20
Y20 Deformed Steel Reinforcing Bar is a heavy-duty option for structural concrete reinforcement. The ribbed profile maximises bond, assisting load transfer and crack control. At approx. 20mm diameter and 6m length, Y20 is ideal for highly loaded beams, columns, and foundations. Works with standard bar chairs, stirrups, and ties for efficient placement. Ensure adequate concrete cover, correct lap lengths, and proper vibration for best performance. Store off the ground and protect from contamination before installation.
-
Sydney Hardware Steel Reinforcing Bar 6MT Deformed Reo - Reo Y20 Galvanized
Galvanized Y20 Deformed Reinforcing Bar offers superior corrosion resistance for long-life concrete structures in harsh or coastal environments. The ribbed profile ensures high bond with concrete, while the zinc coating protects against corrosion. Supplied in 6m lengths, Y20 (approx. 20mm diameter) is suited to heavily loaded elements such as beams, columns, and foundations. Use compatible accessories and handle with care to preserve the galvanised finish. Follow correct detailing and cover requirements for durable, reliable performance.
-
Sandhub Stock bar N12 x 6m
N12 x 6m deformed reinforcing bar for general concrete reinforcement in slabs, beams, footings, and columns. The ribbed profile enhances bond with concrete, improving structural performance and crack control. Suitable for cut-and-bend operations, starter bars, and on-site fabrication. Reliable stock length simplifies handling and transport. Ideal for residential and commercial construction, precast elements, and civil works. Use with compatible chairs, ties, and spacers to maintain cover and alignment during pours for consistent, code-compliant results.
-
Sandhub Stock bar N16 x 6m
N16 x 6m deformed reinforcing bar offering increased cross-sectional capacity for higher loads and spans. The ribbed profile promotes superior bond to concrete, supporting crack control and structural integrity. Suited to slabs, beams, footings, and columns in residential, commercial, and civil projects. Easy to cut, bend, and tie on site for custom reinforcement layouts. Use with bar chairs and spacers to maintain cover. Supplied in standard stock length for efficient handling, transport, and staging in busy construction environments.
You have seen 122 out of 122 products
