Ark Building Supplies
-
Ark Building Supplies 170 x 63mm E13 H2 Treated LVL Beam – 7.8m
E13 H2 treated LVL beam engineered for reliable strength and dimensional stability. H2 termite treatment suits internal, above‑ground applications. Uniform straightness reduces twist and bow, simplifying installation for lintels, beams and joists. Low moisture content and laminated construction minimise shrinkage and splitting. Compatible with standard saws and fasteners for quick site work. Install to engineered plans and relevant Australian Standards, sealing cut ends appropriately.
$163.80
-
Ark Building Supplies 18 x 18mm H3 Primed DAR FJ Pine – 5.4m Length
Exterior H3 treated, pre‑primed, dressed all round finger‑jointed pine for durable, paint‑ready finishing. Smooth, defect‑free faces deliver consistent profiles for fascias, trims and external joinery. Suitable above ground in weather‑exposed areas when top‑coated. Easy to cut and fix with nails or screws; seal all end cuts and fastener penetrations. Store dry and paint promptly after installation for best service life and colour retention.
-
Ark Building Supplies 180 x 25mm H3 Primed DAR FJ Pine – 5.4m Length
H3 treated, pre‑primed, dressed all round finger‑jointed pine board for exterior above‑ground use. Clean, straight and stable for fascias, cladding trims and general finishing. Factory primer provides an excellent base for top coats, speeding installation. Fix with compatible nails or screws and seal all cut ends and penetrations. Maintain a robust paint system for long‑term durability in coastal or exposed sites.
-
Ark Building Supplies 180 x 45mm Standard Joist Hanger – Face-Mount Bracket
Face‑mount joist hanger sized for 180 x 45mm members to provide reliable, code‑compliant connections to ledgers or bearers. Pre‑punched nail holes enable fast installation with connector nails or structural screws. Transfers shear loads and resists rotation for quieter, stiffer floors and decks. Use with compatible fixings and anchors as specified by engineering and environmental exposure class. Ideal for decking, floor systems and roof framing.
-
Ark Building Supplies 180 x 65mm GL10 H3 Primed Laminated Timber – 3.6m
GL10 glue‑laminated, H3 treated and factory‑primed timber for straight, stable exterior members. Dressed all round for a clean, uniform appearance and rapid painting. Ideal for beams, lintels and feature framing in above‑ground outdoor settings. Kiln‑dried manufacture and high bond integrity reduce movement and checking. Use corrosion‑resistant fixings and seal all cut ends before top‑coating. Install per engineered specifications and local codes.
$191.00
-
Ark Building Supplies 180 x 65mm GL10 H3 Primed Laminated Timber – 4.8m
GL10 glue‑laminated, H3 treated, pre‑primed timber delivering structural capacity with excellent stability. Dressed all round for a paint‑ready finish and consistent sizing. Suitable for exterior, above‑ground applications such as beams, lintels and pergola members. Reduced twist and bow for faster, cleaner installs. Seal cut ends and maintain a quality top‑coat system. Use corrosion‑resistant fixings and follow engineered design.
$254.00
-
Ark Building Supplies 180 x 65mm GL10 H3 Primed Laminated Timber – 5.4m
Structural GL10 glue‑laminated H3 treated timber, factory primed and dressed all round for exterior above‑ground use. Straight, stable and consistent, ideal for beams, lintels and decorative framing. Kiln‑dried manufacture minimises movement, checking and onsite rework. Seal all cut ends; apply compatible top coats promptly after installation. Use appropriate corrosion‑resistant fixings and install per engineering.
$286.00
-
Ark Building Supplies 180 x 65mm GL10 H3 Primed Laminated Timber – 6m
High‑performance GL10 glue‑laminated timber with H3 treatment and factory primer for exterior, above‑ground applications. Dressed all round for a smooth, paint‑ready finish and consistent dimensions. Excellent straightness and stability suit beams, lintels and pergola structures. Seal all cut ends and maintain quality paint systems. Use corrosion‑resistant fixings and follow engineered specifications and local standards.
$366.00
-
Ark Building Supplies 180 x 65mm GL10 H3 Primed Laminated Timber – 7.2m
GL10 glue‑laminated, H3 treated and pre‑primed timber for robust exterior above‑ground members. Dressed all round for quick painting and a uniform appearance. Stable, straight and reliable for beams, lintels and feature framing where long lengths are required. Seal cut ends with appropriate primer/preservative and use corrosion‑resistant fixings. Install in accordance with engineered design and Australian Standards.
$382.00
-
Ark Building Supplies 180 x 65mm Heavy Duty Joist Hanger – Face-Mount Bracket
Heavy‑duty face‑mount joist hanger for 180 x 65mm members, offering increased load capacity and secure joist support. Pre‑punched hole pattern speeds installation with connector nails or structural screws. Ensures accurate alignment, reduces squeaks and resists rotation in high‑load floors and decks. Install per manufacturer guidance using fixings appropriate for the environment. Ideal for large spans and high‑demand applications.
-
Ark Building Supplies 1800 x 1200 x 17mm Formply Sheet – Formwork Plywood
High‑quality formwork plywood sheet sized 1800 x 1200 x 17mm for casting smooth, dimensionally accurate concrete. Durable faces and sealed edges enhance re‑use potential and resist moisture ingress during pour cycles. Suitable for site‑built formwork, columns, beams and soffits. Cut and fix with standard tools; support adequately and oil as required for clean release. Store flat and dry to maintain panel integrity between uses.
-
Ark Building Supplies 185 x 18mm H3 Primed DAR FJ Pine – Exterior Grade
Pre‑primed, H3 treated, dressed all round finger‑jointed pine for exterior, above‑ground applications. Smooth, consistent faces and edges provide a paint‑ready surface for fascias, trims and general finishing. Stable and straight for accurate installation with nails or screws. Seal all cut ends and fastener penetrations; apply compatible top coats promptly for long‑term durability. Store dry prior to installation.
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 3.6m
Exterior H3 treated, factory‑primed and dressed all round pine section suitable for above‑ground applications. Smooth, paint‑ready finish speeds installation for fascias, pergolas and general outdoor framing. Stable and straight to minimise onsite waste and rework. Fix with compatible nails or screws; seal all cut ends and maintain a robust paint system. Follow design and span requirements for structural use.
$115.20
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 4.2m
H3 treated, pre‑primed and dressed all round pine board engineered for exterior above‑ground use. Provides a smooth, consistent surface for efficient top‑coating and a clean finish. Ideal for fascias, trims, pergola members and general outdoor framing. Use corrosion‑resistant fixings and seal all cut ends. Install in accordance with project design and local standards for best performance.
$134.40
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 4.8m
Pre‑primed, H3 treated, dressed all round timber for durable exterior above‑ground applications. Straight and stable for neat, accurate installation in fascias, trims and light structural members. Ready for paint to accelerate site progress. Fix with compatible fasteners and seal cut ends and penetrations. Maintain top coats for long‑term weathering performance.
$153.60
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 5.4m
Exterior‑grade H3 treated, factory‑primed and dressed all round pine section. Provides a smooth, paint‑ready finish and consistent dimensions for clean lines. Suitable for fascias, trims, pergola components and general outdoor framing. Use corrosion‑resistant fixings; seal all cut ends and maintain a high‑quality paint system after installation. Follow span and design requirements for structural applications.
$140.00
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 6m
H3 treated, pre‑primed, dressed all round pine designed for exterior, above‑ground use. Straight and stable for efficient installation in fascias, trims and light framing. Ready to paint, reducing onsite preparation time. Fasten with compatible nails or screws; seal all cut ends and penetrations. Maintain a durable top‑coat system for long service life.
$192.00
-
Ark Building Supplies 185 x 42mm H3 Treated Primed DAR Timber – 7.2m
Long‑length, H3 treated, pre‑primed and dressed all round pine for exterior above‑ground applications. Provides a clean, paint‑ready finish and consistent sizing for efficient site work. Ideal for fascias, pergola members and general outdoor framing. Seal cut ends and use corrosion‑resistant fixings. Install to design and local standards for compliance and durability.
$230.40
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 2.4m
F5 structural Oregon (Douglas Fir) timber, kiln‑dried for stability and clean machining. Reliable strength‑to‑weight ratio suits internal framing, trimmers, lintels and general construction where untreated softwood is specified. Works well with standard saws, nails and screws. Protect from weather prior to installation and treat or seal if exposure is expected. Verify spans against engineering requirements and local codes.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 3.6m
F5 grade Oregon (Douglas Fir) timber, kiln‑dried for stability and straightness. Ideal for internal framing, lintels, trimmers and general carpentry where untreated softwood is specified. Cuts and fixes easily with standard tools and fasteners. Keep dry before installation; consider sealing if temporary exposure may occur. Design and install to engineering requirements.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 3m
Structural F5 Oregon (Douglas Fir) timber, kiln‑dried for dimensional stability and ease of handling. Suitable for internal framing members, lintels, trimmers and general construction. Machines cleanly for accurate cuts and fast fixing. Store dry and protect from the weather; apply appropriate treatments if exposure is anticipated. Confirm spans and capacities per engineering design and Australian Standards.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 4.2m
Kiln‑dried F5 Oregon (Douglas Fir) structural timber providing dependable performance for internal framing, trimmers and lintels. Lightweight and easy to machine for fast, accurate installation. Use standard fixings and verify spans per project engineering. Store and handle dry to maintain dimensional stability and minimise movement.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 4.8m
Structural F5 Oregon (Douglas Fir) timber, kiln‑dried for straightness and reliable handling. Suited to internal framing, lintels and trimmers where untreated softwood is specified. Cuts cleanly and fixes with nails or screws. Protect from moisture prior to installation; seal if exposure is expected. Install to engineering design and local codes.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 5.4m
F5 grade Oregon (Douglas Fir) timber, kiln‑dried for dimensional stability and ease of installation. Appropriate for internal framing, trimmers and lintels where untreated softwood is specified. Works well with standard tools and fasteners. Keep dry during handling and storage; treat or seal if exposure is anticipated. Follow engineering requirements for span and bearing.
-
Ark Building Supplies 190 x 45mm F5 Oregon (Douglas Fir) Timber – 6m
Long‑length F5 Oregon (Douglas Fir) timber, kiln‑dried for straightness and reliable performance. Ideal for internal framing and lintels where untreated softwood is specified. Easy to cut, nail and screw with standard tools. Store dry to maintain stability and protect from weather before installation. Verify spans per engineering and local standards.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 2.4m
MGP10 structural pine with H2 termite treatment for internal, above‑ground framing. Kiln‑dried and precision‑sawn for straightness and consistent performance in studs, plates and joists. Compatible with standard fixings and connectors for fast site work. Not for in‑ground or prolonged exterior exposure. Handle and store dry; seal cut ends where required. Design to AS 1684 and project engineering.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 3.6m
MGP10 graded, H2 termite‑treated structural pine suited to internal above‑ground framing. Kiln‑dried for straightness and dimensional consistency, enabling fast, accurate installation. Accepts standard fasteners and connectors. Keep dry prior to installation; not intended for in‑ground or exterior exposed use. Follow span tables and engineering requirements.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 3m
H2 termite‑treated MGP10 structural pine for internal, above‑ground framing. Kiln‑dried for stability and accurate sizing, ideal for studs, plates and joists. Works with standard nails, screws and connectors. Not suitable for in‑ground use or long‑term exterior exposure. Store dry and seal cut ends if required. Design and install per AS 1684 and engineering.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 4.2m
H2 termite‑treated, MGP10 structural pine designed for internal, above‑ground framing applications. Kiln‑dried for stability and easy handling. Consistent sizing supports rapid installation with nails, screws and connectors. Store dry; seal cut ends as required by specification. Design to AS 1684 and project engineering for compliance.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 4.8m
MGP10 graded, H2 termite‑treated pine suitable for internal above‑ground framing of studs, plates and joists. Kiln‑dried for stability and accurate sizing. Compatible with standard fasteners and connectors. Not for in‑ground or exterior exposure; keep dry until installed. Follow engineering and Australian Standards for spans and fixings.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 5.4m
Structural MGP10 pine with H2 termite protection for internal, above‑ground framing. Kiln‑dried for straightness and consistent performance. Suitable for studs, plates and joists, fixing with nails, screws and connectors. Store and handle dry; seal cut ends where specified. Design to AS 1684 and engineer’s details for compliance.
-
Ark Building Supplies 190 x 45mm H2 MGP10 Treated Pine – Structural Timber – 6m
Long‑length H2 termite‑treated MGP10 structural pine for internal above‑ground framing. Kiln‑dried and precision‑sawn for stability and easy installation. Use standard fasteners and connectors. Not suitable for in‑ground or exterior exposed use; keep dry prior to install. Follow engineering and AS 1684 span requirements.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 3.6m
Exterior‑grade H3 CCA treated pine designed for above‑ground structural applications. Provides resistance to fungal decay and insect attack. Ideal for decks, pergolas and general outdoor framing. Cut and fix with standard tools; seal all cut ends and use corrosion‑resistant fasteners. Comply with span tables and engineered design for performance.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 3m
H3 CCA treated pine for exterior, above‑ground structural use. Pressure treatment resists decay and insects, suiting decks, pergolas, bearers and general outdoor framing. Dress and cut with standard tools; seal cut ends with appropriate preservative and prime before painting. Use corrosion‑resistant fasteners in treated timber. Follow span tables and engineering design for compliance.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 4.2m
H3 CCA treated pine for durable exterior, above‑ground structural use. Suits bearers, joists, pergola beams and general framing. Pressure treatment protects against decay and termites. Use corrosion‑resistant fixings and seal all cut ends with approved preservative. Follow engineered design and local standards for spans and fixings.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 4.8m
Exterior H3 CCA treated pine section suitable for above‑ground structural applications including decks and pergolas. Treatment resists decay and insect attack. Easy to cut and fix; seal all cut ends, prime and paint where applicable. Use corrosion‑resistant fasteners for longevity. Install per engineering and local building codes.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 5.4m
H3 CCA treated pine for above‑ground exterior structural applications. Durable treatment helps resist rot and termites. Ideal for pergolas, decks and general framing. Cut with standard tools; seal end cuts and use corrosion‑resistant fixings. Design and install to span tables and engineering requirements.
-
Ark Building Supplies 190 x 45mm H3 CCA Treated Pine – Outdoor Structural Timber – 6m
Long‑length H3 CCA treated pine for exterior, above‑ground structural use. Treatment protects against decay and insects, suiting decks, pergolas and general outdoor framing. Fix with corrosion‑resistant fasteners and seal all cut ends with suitable preservative. Follow engineered design and local standards for spans and fixings.
-
Ark Building Supplies 190 x 45mm I-Joist Face-Mount Joist Hanger
Face‑mount hanger tailored for 190 x 45mm I‑joists, providing positive, engineered support at ledgers and beams. Pre‑punched hole pattern suits connector nails or structural screws for rapid installation and reliable load transfer. Helps maintain web integrity and alignment while minimising squeaks. Use as specified by design documentation and environmental exposure class.
-
Ark Building Supplies 190 x 75 x 50 x 6mm Galvanised Steel Angle Bracket
Heavy‑duty 6mm thick galvanised steel angle bracket for robust corner, ledger and bracing connections. Pre‑drilled holes support fast, accurate fixing with bolts or coach screws. Hot‑dip galvanised finish enhances corrosion resistance for outdoor and coastal applications. Suitable for timber‑to‑timber or timber‑to‑masonry connections as designed. Verify capacity to engineering requirements and select compatible fasteners.
-
Ark Building Supplies 192 x 65 x 3mm Galvanised Steel Bracket Plate
3mm thick galvanised steel bracket plate for structural joining, bracing and load distribution. Pre‑punched hole pattern enables quick, accurate fixing with nails, screws or bolts. Ideal for repairing or reinforcing timber members, truss connections and general construction joints. Galvanised finish provides corrosion resistance in exposed environments. Use correct fasteners and follow engineering specifications for capacity and spacing.
-
Ark Building Supplies 195 x 65 x 65 x 3mm Galvanised Steel Angle Bracket
Galvanised steel angle bracket, 3mm thick, for dependable corner and ledger connections. Pre‑drilled for efficient installation with bolts or screws. Provides rigid restraint and load transfer in timber or light steel construction. Corrosion‑resistant coating suits outdoor use; select appropriate fasteners for environment and loading. Verify capacity to engineering requirements.
-
Ark Building Supplies 200 x 200 x 37 x 6mm Wide Bracket – Multi-Purpose Fixing
Wide, multi‑purpose bracket with 6mm thickness for robust connections, shelf supports and structural fixings. Generous 200 x 200 x 37mm legs suit large‑section timber or masonry anchoring. Pre‑drilled holes enable quick installation with bolts or screws. Use for heavy‑duty bracing, ledger support or general fabrication as designed. Confirm load rating and fastener selection with engineering.
-
Ark Building Supplies 200 x 2mm Split Joist Hangers (Pair) – Nail-On Brackets
Split joist hangers sized 200 x 2mm supplied as a pair for supporting joists where wrap‑around fixing is required. Nail‑on design provides positive, concealed support while allowing for timber movement. Ideal for renovations, decks and floor framing. Install with specified connector nails or screws to achieve rated performance, considering environmental corrosion requirements. Follow manufacturer guidance and engineering details.
-
Ark Building Supplies 200 x 45mm E13 H2 Treated LVL Beam – 3.6m
E13 H2 treated LVL beam offering engineered strength and dimensional stability for internal, above‑ground applications. Termite‑resistant H2 treatment and uniform straightness simplify installation for lintels, beams and joists. Laminated construction minimises shrinkage and splitting. Cut and fix with standard tools and fasteners. Install to engineered plans and Australian Standards; seal cut ends appropriately.
-
Ark Building Supplies 200 x 45mm E13 H2 Treated LVL Beam – 3m
Engineered E13 H2 treated LVL beam for reliable structural performance in internal, above‑ground environments. Consistent straightness and strength simplify installation for lintels, beams and trimmers. Low moisture content reduces movement. Compatible with standard saws and fixings. Install to engineering details and relevant Australian Standards, sealing any cut ends.
-
Ark Building Supplies 200 x 45mm E13 H2 Treated LVL Beam – 4.2m
E13 H2 treated LVL beam designed for strong, stable performance in internal, above‑ground applications. Straight, uniform sections streamline installation for beams, lintels and joists. Laminated construction limits shrinkage and checking. Saw and fix with standard tools. Follow engineered designs and Australian Standards; seal all end cuts and penetrations.
-
Ark Building Supplies 200 x 45mm E13 H2 Treated LVL Beam – 4.8m
Structural E13 H2 treated LVL beam offering dependable strength and dimensional stability for internal, above‑ground use. Excellent straightness aids fast installs in lintels, beams and trimmers. Low movement reduces callbacks. Use standard fasteners and saws; seal all cut ends. Install to engineered documentation and local standards.
You have seen 192 out of 796 products
