Reo Point
-
Reo Point 0.75mm Bondek
Bondek 0.75 mm composite steel formwork decking provides a high‑strength profiled base for concrete slabs, acting as permanent formwork and contributing to composite action. The precision ribbed profile speeds installation, reduces propping, and delivers a clean soffit finish ready for services. Ideal for residential and commercial floors, mezzanines and roof decks. Compatible with standard support frames, edge forms and reinforcement layouts, it improves site efficiency, safety and slab performance while maintaining consistent quality across large areas.
-
Reo Point 100mm Wire Chair Plastic Tip
Provide accurate concrete cover for reinforcing mesh and bar in slabs, beams and precast elements. The plastic‑tipped support reduces point pressure and minimises rust staining on the finished surface, while the rigid wire frame delivers stability under foot traffic and during pours. At 100 mm height, it helps achieve the specified cover across formwork and ground slabs. Quick to place and tie, it suits most bar sizes and spacing layouts, improving productivity and reinforcing integrity on site.
-
Reo Point 105/110 SOG Chairs
Dual‑height slab‑on‑ground bar chairs providing stable reinforcement support over membranes and compacted bases. The adjustable 105–110 mm setting helps achieve specified cover, while a broad footing distributes load and resists punch‑through during placement. Durable construction resists deformation and keeps mesh or bars accurately positioned to reduce rework and ensure structural performance. Ideal for residential and commercial ground slabs, driveways, shed pads and general reinforcing applications. Fast, reliable, and easy to use with standard tying wire and spacers.
-
Reo Point 10mm Stirrups 200x150 10pk
Closed reinforcing steel stirrups made from 10 mm bar for beams and columns. Sized 200 x 150 mm to restrain longitudinal bars, maintain spacing and improve shear capacity. Supplied in a convenient pack of 10 for efficient handling on site. Use in cast‑in‑place or precast work, tying to main bars to keep cages rigid during lifting and concrete placement. Suitable for construction, structural repairs and general reinforcing tasks where consistent dimensions and reliable performance are required.
-
Reo Point 10mm Stirrups 200x200 10pk
10 mm closed steel stirrups sized 200 x 200 mm for reinforcing beams and columns. They provide lateral restraint to longitudinal bars, maintain cage geometry and enhance shear performance. Packed in sets of 10 for streamlined site logistics and rapid assembly. Tie to main bars to keep reinforcement secure during handling, formwork placement and concrete pours. Ideal for structural framing, general construction and repair works where accuracy, durability and consistent spacing are essential to the design.
-
Reo Point 10mm Stirrups 200x250 10pk
Closed 10 mm reinforcing stirrups sized 200 x 250 mm for beams, columns and lintels. Designed to contain longitudinal bars, hold spacing, and improve shear resistance in structural elements. Supplied as a pack of 10 to simplify ordering and speed cage assembly. Tie securely to main bars for rigid cages that withstand lifting and concrete vibration. Suitable for new builds, renovations and precast fabrication where consistent dimensions and reliable performance are required across repeated elements.
-
Reo Point 10mm Stirrups 300x150 10pk
10 mm closed steel stirrups sized 300 x 150 mm, ideal for beams and columns requiring wider profiles. They restrain longitudinal bars, control spacing and enhance shear capacity. Packed in 10s for efficient handling, storage and site productivity. Suitable for cast‑in‑place and precast reinforcement cages. Tie to main bars to maintain geometry during transport and concrete placement. A durable, consistent solution for structural framing, repairs and general reinforcing where accuracy and reliability are essential.
-
Reo Point 10mm Stirrups 300x200 10pk
Closed 10 mm reinforcing stirrups sized 300 x 200 mm for beams, columns and transfer elements. They provide lateral restraint to longitudinal bars, preserve cage shape and contribute to shear performance. Supplied as a pack of 10 to streamline site logistics and assembly. Suitable for formwork, precast and in‑situ construction. Tie to main bars for a rigid, stable cage that withstands handling and vibration, ensuring correct cover and positioning throughout the pour.
-
Reo Point 10mm Stirrups 300x250 10pk
10 mm steel stirrups, 300 x 250 mm, designed to confine longitudinal reinforcement and maintain spacing in beams and columns. The closed tie form increases shear capacity and cage stability. Supplied in a 10‑pack for efficient site use and consistent detailing across repeated elements. Ideal for precast and cast‑in‑place construction, structural repairs and general reinforcing. Tie into cages to keep bars secure during transport, placement and vibration for dependable structural performance.
-
Reo Point 10mm Stirrups 300x300 10pk
Closed 10 mm reinforcing stirrups sized 300 x 300 mm for larger beams, columns and deep members. They restrain longitudinal bars, maintain correct spacing and enhance shear resistance. Supplied in packs of 10 to simplify ordering and speed cage assembly. Suitable for cast‑in‑place and precast fabrication where dimensional consistency is critical. Tie to main bars to ensure a rigid cage that holds position and cover during lifting, formwork installation and concrete placement.
-
Reo Point 10mm Stirrups 350x200 10pk
10 mm closed steel stirrups, 350 x 200 mm, for beams and columns requiring extended widths and reliable shear confinement. They maintain spacing of longitudinal bars and stabilise cages under handling and vibration. Pack of 10 for practical site management and consistent detailing. Suitable for in‑situ pours and precast work across residential, commercial and civil projects. Tie securely to main bars to ensure accurate cover and geometry through all stages of construction.
-
Reo Point 10mm Stirrups 400x200 10pk
Closed 10 mm reinforcing stirrups sized 400 x 200 mm for wide beams, columns and transfer members. Provide lateral restraint to longitudinal bars, preserve spacing and enhance shear performance. Supplied in a 10‑pack for efficient material handling and repeatable detailing on site. Ideal for cast‑in‑place and precast applications, structural repairs and general reinforcing where consistent dimensions matter. Tie to primary bars for rigid, stable cages that withstand transport and concrete vibration.
-
Reo Point 10mm Stirrups 400x300 10pk
10 mm closed steel stirrups sized 400 x 300 mm, suited to larger beams and columns requiring robust shear confinement. They maintain longitudinal bar spacing and help keep cages square and stable during placement. Sold in packs of 10 to streamline procurement and assembly. Suitable for precast and in‑situ construction across residential, commercial and civil projects. Tie to main bars to ensure accurate cover and geometry under handling and concrete vibration for consistent structural outcomes.
-
Reo Point 10mm Stirrups 450x200 10pk
Closed 10 mm reinforcing stirrups sized 450 x 200 mm for deep beams and columns. They provide lateral restraint to longitudinal bars, maintain spacing and enhance shear capacity. Packed in 10s for efficient site use and consistent detailing. Ideal for cast‑in‑place and precast cages where dimensional accuracy is essential. Tie securely to primary bars to keep the cage rigid during lifting, formwork assembly and concrete placement, ensuring correct cover and long‑term performance.
-
Reo Point 10mm Stirrups 450x300 10pk
10 mm closed steel stirrups, 450 x 300 mm, designed for substantial beams and columns. They confine longitudinal bars, maintain spacing and improve resistance to shear. Supplied in a pack of 10 to support efficient cage fabrication and repeatable quality. Suitable for precast and in‑situ applications across building and civil works. Tie to main bars to ensure cage rigidity and accurate cover during handling, vibration and concrete placement.
-
Reo Point 10mm Stirrups 450x400 10pk
Closed 10 mm stirrups sized 450 x 400 mm for large beams, columns and transfer elements requiring significant shear confinement. Maintain longitudinal bar spacing and cage geometry through handling and vibration. Supplied as a 10‑pack for streamlined logistics and consistent fabrication. Suitable for cast‑in‑place and precast construction where reliable, repeatable dimensions are essential. Tie firmly to main bars to achieve correct cover and dependable structural performance in demanding applications.
-
Reo Point 10mm Stirrups 500x200 10pk
10 mm closed steel stirrups sized 500 x 200 mm for deep, wide beams and columns. They restrain longitudinal bars, control spacing and bolster shear capacity. Packed in sets of 10 for efficient site management and repeatable detailing. Ideal for precast and cast‑in‑place reinforcement cages across residential, commercial and infrastructure projects. Tie to primary bars to keep cages true during lifting, formwork assembly and concrete placement, ensuring compliant cover and positioning.
-
Reo Point 10mm Stirrups 500x300 10pk
Closed 10 mm reinforcing stirrups sized 500 x 300 mm for substantial beams and columns needing robust shear confinement. Maintain bar spacing and cage geometry to support structural performance. Supplied in a 10‑pack for ease of handling and consistent fabrication. Suitable for precast and in‑situ construction, tied securely to main bars to keep cages stable during transport and vibration. Reliable, accurate and ready for demanding construction environments.
-
Reo Point 10mm Stirrups 550x200 10pk
10 mm closed steel stirrups sized 550 x 200 mm for deep beams and columns requiring wide profiles. Provide lateral restraint to longitudinal bars, maintain spacing and enhance shear capacity. Packaged in 10s for efficient procurement and cage assembly. Suitable for precast and cast‑in‑place work, structural repairs and general reinforcing. Tie to main bars to keep cages rigid through handling and concrete placement, achieving accurate cover and dependable results.
-
Reo Point 10mm Stirrups 550x300 10pk
Closed 10 mm reinforcing stirrups sized 550 x 300 mm for large beams, columns and transfer members. They restrain longitudinal bars, preserve spacing and improve shear resistance. Supplied as a 10‑pack to streamline site logistics and maintain consistent detailing across repeated elements. Ideal for both precast and in‑situ construction. Tie securely to primary bars to ensure cage rigidity during lifting, formwork erection and concrete vibration.
-
Reo Point 10mm Stirrups 600x200 10pk
10 mm closed steel stirrups sized 600 x 200 mm for deep, wide beams and columns. Designed to confine longitudinal bars, maintain spacing and bolster shear capacity. Packed in 10s for efficient handling and repeatable fabrication. Suitable for cast‑in‑place and precast reinforcement cages across building and civil projects. Tie firmly to main bars to keep cages true during handling, formwork installation and concrete placement, ensuring correct cover and durable performance.
-
Reo Point 10mm Stirrups 600x300 10pk
Closed 10 mm reinforcing stirrups, 600 x 300 mm, for major beams and columns needing robust shear confinement and bar restraint. Maintain cage geometry and spacing for reliable structural performance. Supplied in packs of 10 to streamline site workflows and ensure consistent detailing. Suitable for precast and in‑situ applications. Tie into cages to resist deformation during lifting, placement and vibration, achieving accurate cover throughout construction.
-
Reo Point 110mm Wire Chair Plastic Tip
Accurately supports reinforcement at 110 mm cover for slabs, beams and precast work. The plastic tip reduces point loading and helps prevent rust staining on the concrete surface, while the wire frame provides dependable stability under foot traffic and during pours. Quick to position and tie, it suits common bar diameters and mesh. Use across formwork and ground slabs to maintain specified cover, improve cage integrity and reduce rework for consistent, quality finishes.
-
Reo Point 115/120 SOG Chairs
Adjustable slab‑on‑ground bar chairs set to 115–120 mm for accurate reinforcement cover over membranes or compacted bases. Wide, stable footing helps prevent punch‑through during foot traffic and placement, keeping mesh and bars in position. Tough, durable construction resists deformation and simplifies installation with standard tying wire. Ideal for house slabs, driveways, commercial pads and general reinforcing tasks where consistency and reliability are essential to long‑term performance.
-
Reo Point 120mm Wire Chair Plastic Tip
Provide 120 mm concrete cover for reinforcing in slabs, beams and precast elements. The plastic tip spreads load and minimises rust staining, while the robust wire body offers dependable stability during placement and vibration. Easy to position and tie, it suits common bar and mesh sizes and helps maintain cage geometry. Ideal for construction and general reinforcing applications requiring accurate cover, reduced rework and consistent results across large pours.
-
Reo Point 125/130 SOG Chairs
Dual‑height SOG bar chairs adjustable to 125–130 mm, providing reliable concrete cover on membranes and compacted bases. A broad footing distributes load to reduce puncture risk and maintain reinforcement position during pours. Durable construction resists deformation and supports mesh or bars for accurate placement. Ideal for residential slabs, commercial floors, paths and driveways. Quick to install with standard tying wire, improving productivity and reinforcing quality on site.
-
Reo Point 12mm Black Dowel 460mm
Precision‑cut 12 mm x 460 mm black steel dowel bar for concrete slabs and pavements. Facilitates load transfer across construction and expansion joints while permitting movement to reduce cracking. Straight, consistent dimensions allow fast installation using sleeves and caps. Ideal for driveways, industrial floors, footpaths and general slab work. Use with compatible dowel sleeves and joint formers to ensure correct alignment, cover and debonding for long‑term slab performance.
-
Reo Point 12mm Black Dowel 600mm
12 mm x 600 mm black steel dowel bar designed for efficient load transfer across slab joints while allowing longitudinal movement to control cracking. Straight and consistent for quick installation with sleeves, caps and chairs. Suitable for driveways, pavements, warehouse floors and general concrete construction. Use with compatible dowel sleeves to ensure proper alignment, cover and debonding. A durable, dependable solution for long‑lasting slab performance and reduced maintenance.
-
Reo Point 12mm Deformed Bar D500 6mtr
Deformed reinforcing bar, 12 mm x 6 m, grade D500 with a ribbed profile for superior bond to concrete. Suitable for beams, columns, slabs, footings and general reinforcing cages. Straight lengths are easy to cut, bend and tie on site. Use with bar chairs, spacers and ties to achieve correct cover and maintain positioning during pours. Ideal for residential, commercial and civil construction projects requiring reliable strength and consistent quality.
-
Reo Point 12mm Gal Dowel 460mm
12 mm x 460 mm galvanised dowel bar for concrete slabs and pavements where added corrosion resistance is required. Ensures efficient load transfer across construction or expansion joints while permitting movement to control cracking. Straight, consistent dimensions speed installation with sleeves and joint formers. Ideal for driveways, external slabs, industrial floors and coastal applications. Use with compatible dowel sleeves and caps to achieve correct alignment, cover and long‑term durability.
-
Reo Point 12mm Gal Dowel 600mm
Galvanised 12 mm x 600 mm dowel bar providing enhanced durability for external slabs and aggressive environments. Transfers load across construction and expansion joints while allowing movement to limit cracking. Precision cut for quick installation with sleeves and caps. Ideal for pavements, driveways, hardstands and general slab work. Use with compatible dowel sleeves to ensure proper alignment, cover and debonding for long‑term performance and reduced maintenance exposure.
-
Reo Point 12mm Soft Steel (Pool) 6m
Soft steel reinforcing bar, 12 mm x 6 m, designed for easy bending into tight radii for pools, curved walls and intricate reinforcing details. Smooth workability assists quick fabrication on site or in the yard. Compatible with standard tying wire, chairs and spacers to maintain cover and position. Use for edge bars, ligatures and custom shapes where more pliable steel is preferred. Ideal for residential and light commercial construction requiring precise, curved reinforcement.
-
Reo Point 130mm Wire Chair Plastic Tip
Support reinforcement at 130 mm concrete cover in slabs, beams and precast elements. The plastic tip spreads load and helps prevent rust staining on finished surfaces, while the wire frame ensures stability under traffic and vibration. Quick to place and tie, it suits common bar and mesh sizes for efficient installation. Use across formwork and ground slabs to maintain specified cover, protect reinforcement and deliver consistent, high‑quality results on site.
-
Reo Point 135/140 SOG Chairs
Adjustable SOG bar chairs set to 135–140 mm for accurate reinforcement cover over membranes or compacted base material. The broad footing distributes load to resist punch‑through during foot traffic and concrete placement, helping keep mesh or bars exactly where needed. Durable construction simplifies installation with standard tying wire. Ideal for house slabs, commercial pads, paths and general ground‑bearing slab applications where consistency and reliability are critical.
-
Reo Point 135/140 SOG Chairs
Adjustable SOG bar chairs set to 135–140 mm for accurate reinforcement cover over membranes or compacted base material. The broad footing distributes load to resist punch‑through during foot traffic and concrete placement, helping keep mesh or bars exactly where needed. Durable construction simplifies installation with standard tying wire. Ideal for house slabs, commercial pads, paths and general ground‑bearing slab applications where consistency and reliability are critical.
-
Reo Point 140mm Wire Chair Plastic Tip
Deliver 140 mm concrete cover for reinforcing in slabs, beams and precast elements. The plastic tip reduces point pressure and minimises rust staining, while the sturdy wire frame provides stability during placement and vibration. Easy to position and tie, it suits a wide range of bar diameters and mesh. Ideal for general construction where accurate cover, reinforcement protection and consistent results are essential across large pours and repetitive elements.
-
Reo Point 145/150 SOG Chairs
Dual‑height slab‑on‑ground bar chairs adjustable to 145–150 mm for precise reinforcement cover. A wide, stable base resists punch‑through on membranes and compacted subgrades, maintaining bar and mesh position during placement. Tough construction withstands site traffic and vibration, supporting efficient, reliable installation with standard tying wire. Ideal for residential and commercial ground slabs, driveways and hardstands where accuracy and durability matter to long‑term performance.
-
Reo Point 145/150 SOG Chairs
Dual‑height slab‑on‑ground bar chairs adjustable to 145–150 mm for precise reinforcement cover. A wide, stable base resists punch‑through on membranes and compacted subgrades, maintaining bar and mesh position during placement. Tough construction withstands site traffic and vibration, supporting efficient, reliable installation with standard tying wire. Ideal for residential and commercial ground slabs, driveways and hardstands where accuracy and durability matter to long‑term performance.
-
Reo Point 150mm Wire Chair Plastic Tip
Achieve 150 mm concrete cover for reinforcement in slabs, beams and precast work. The plastic tip helps prevent rust staining and spreads load on the formwork surface, while the wire frame provides strength and stability during placement. Quick to install and tie, it suits common mesh and bar sizes. Ideal for general construction and reinforcing tasks requiring accurate cover, improved cage integrity and consistent finishes across large pours.
-
Reo Point 160mm Wire Chair Plastic Tip
Support reinforcement at 160 mm cover in slabs, beams and precast elements. The plastic tip reduces point pressure and minimises rust staining on finished surfaces, while the robust wire body stands up to site traffic and vibration. Easy to position and tie for fast installation, it suits typical mesh and bar arrangements. Use to maintain specified cover and reinforcement position, reducing rework and helping deliver durable, consistent concrete results.
-
Reo Point 16mm Black Dowel 600mm
16 mm x 600 mm black steel dowel bar designed to transfer load across slab joints while allowing movement to minimise cracking. Straight, consistent dimensions enable fast installation with sleeves, caps and chairs. Ideal for pavements, driveways, warehouse floors and general slab construction. Pair with compatible dowel sleeves to ensure proper alignment, cover and debonding. A robust, cost‑effective solution for durable, long‑lasting slabs in a range of environments.
-
Reo Point 16mm Deformed Bar D500 6mtr
Deformed reinforcing bar, 16 mm x 6 m, grade D500 with a ribbed profile for strong bond to concrete. Suitable for beams, columns, slabs, footings and general reinforcement cages. Straight lengths cut, bend and tie easily for efficient fabrication. Use with bar chairs, spacers and ties to achieve accurate cover and maintain position during pours. Ideal for residential, commercial and civil projects requiring dependable strength and quality.
-
Reo Point 16mm Gal Dowel 450mm
16 mm x 450 mm galvanised dowel bar for concrete slabs and pavements requiring added corrosion protection. Provides effective load transfer across construction or expansion joints while allowing movement to control cracking. Precision dimensions allow quick installation with sleeves and caps. Ideal for external slabs, pavements, hardstands and coastal environments. Use with compatible dowel sleeves to ensure correct alignment, cover and long‑term durability of slab joints.
-
Reo Point 16mm Gal Dowel 600mm
Galvanised 16 mm x 600 mm dowel bar designed for efficient load transfer across slab joints in aggressive or external environments. Allows longitudinal movement to reduce cracking while maintaining alignment for performance. Straight, consistent dimensions enable quick installation with sleeves and caps. Suitable for driveways, pavements, industrial floors and exposed slab edges. Use with compatible dowel sleeves for correct positioning, cover and durable, low‑maintenance joints.
-
Reo Point 16mm x 600mm Threaded bar
Steel threaded rod, 16 mm x 600 mm, offering versatile fastening and bracing options on site. Fully threaded for easy adjustment and compatibility with nuts, washers, couplers and anchoring systems. Ideal for formwork tie‑downs, fixing brackets, suspending services and general construction fastening. Can be cut to length and used with chemical or mechanical anchors as needed. Durable and reliable for everyday use in building and civil works.
-
Reo Point 16mmx300mm Dowel Sleeve Round
Round plastic dowel sleeve, 16 mm x 300 mm, designed to house dowel bars and allow slab movement at construction or expansion joints. Ensures correct alignment, cover and debonding of the dowel while facilitating efficient load transfer between slabs. Lightweight, durable and simple to install on formwork or with chairs. Consistent dimensions provide reliable positioning across large projects. Ideal for driveways, pavements, warehouse floors and general concrete construction.
-
Reo Point 170mm Wire Chair Plastic Tip
Provide 170 mm concrete cover for reinforcement in slabs, beams and precast elements. The plastic tip spreads load and helps prevent rust staining, while the robust wire frame offers stability under traffic and vibration. Quick to place and tie, it suits common bars and mesh for efficient installation. Use to maintain specified cover, protect reinforcement and improve consistency across large pours for durable, high‑quality concrete finishes.
-
Reo Point 180mm Wire Chair Plastic Tip
Support reinforcement at 180 mm cover in slabs, beams and precast applications. The plastic tip reduces point pressure and minimises rust staining, while the sturdy wire body withstands site traffic and vibration. Fast to position and tie, it integrates easily with standard bar and mesh layouts. Ideal for maintaining specified cover, ensuring cage stability and achieving consistent, durable concrete outcomes across a range of construction projects.
You have seen 48 out of 468 products
