Steel Mesh
-
Reo Build 11mm Trench Reinforcing Mesh 200mm – 3 Bar
This 200mm wide 3‑bar trench mesh with 11mm bars is designed for reinforcing footings, edge beams, and strip foundations. The compact width suits narrow trenches and perimeter beams around slabs. It helps control cracking, increases tensile capacity, and improves overall stability. Easy to handle and tie, it integrates well with starter bars and corner reinforcements. A practical, time-saving reinforcement option for residential foundations and perimeter trench applications.
-
Reo Build 11mm Trench Reinforcing Mesh 300mm – 4 Bar
This 300mm wide 4‑bar trench mesh with 11mm bars provides dependable reinforcement for wider footings, edge beams, and strip foundations. The additional bar improves strength and crack control in higher-load or wider trench sections. Quick to place and tie, it connects easily to vertical starters and slab reinforcement. Ideal for residential slabs on ground, retaining beam footings, and perimeter beams where enhanced tensile performance and consistent spacing are needed.
-
Reo Build 11mm Trench Reinforcing Mesh 400mm – 5 Bar
This 400mm wide 5‑bar trench mesh using 11mm bars is suited to wide trench footings, deep edge beams, and higher-load foundations. The five-bar configuration enhances tensile capacity and crack control across broader foundation sections. It handles easily on site and ties quickly to starters and mesh sheets. Use where wider trenches demand greater reinforcement continuity, particularly along perimeter beams and load-bearing walls in residential and light commercial builds.
-
Reo Build 12mm Trench Reinforcing Mesh 200mm – 3 Bar
This 200mm wide 3‑bar trench mesh with 12mm bars is ideal for narrow footings and perimeter beams requiring increased bar diameter. It assists with crack control and load transfer in foundation elements. The compact width is easy to place in trenches and ties readily to vertical starters and slab reinforcement. A reliable solution for residential foundations, strip footings, and edge beams where a heavier bar improves performance without increasing overall width.
-
Reo Build 12mm Trench Reinforcing Mesh 300mm – 4 Bar
This 300mm wide trench mesh features four 12mm bars for robust reinforcement of footings, edge beams, and strip foundations. The larger bar diameter boosts tensile capacity and helps resist cracking under load. Quick to install, it ties neatly to slab mesh and starter bars to maintain continuity. Suitable for residential and light commercial foundation work where a stronger bar and consistent spacing are required across mid-width trench sections.
-
Reo Build 12mm Trench Reinforcing Mesh 400mm – 5 Bar
This 400mm wide 5‑bar trench mesh with 12mm bars is designed for wide or higher-load footings and edge beams. The five-bar arrangement and larger bar diameter increase reinforcement capacity and improve crack control across broad foundation elements. Easy to cut and tie, it integrates with vertical starters and slab reinforcement to maintain structural continuity. A strong choice for perimeter beams, load-bearing walls, and wider strip foundations.
-
Reo Build 4m x 2m Reinforcing Mesh Sheet – SL72 Ute
SL72 welded reinforcing mesh in a 4m x 2m ute-size sheet is designed for easier transport and site handling while maintaining dependable slab reinforcement. Ideal for residential slabs, driveways, and pathways, the compact sheet fits common vehicles and tight access sites. The grid helps reduce shrinkage cracking and improves load distribution. Cut to suit and tie to bar chairs for correct cover. A practical format for small pours, repairs, and DIY installations.
-
Reo Build 4m x 2m Reinforcing Mesh Sheet – SL82 Ute
SL82 welded reinforcing mesh in a 4m x 2m ute-size sheet delivers added reinforcement capacity in a convenient, transport-friendly format. Well suited to residential driveways, patios, and shed slabs, it controls cracking and spreads loads effectively. The compact sheet is easier to manoeuvre in confined areas and can be cut and tied on site. Pair with bar chairs and spacers to achieve correct cover and a quality finish on smaller concrete projects.
-
Supply Connect Group 4m x 2m Sheet SL72 Reinforcing Mesh – Ute Mesh for Concrete Slabs
SL72 reinforcing mesh in a 4m x 2m sheet is a site-friendly format for slabs, paths, and driveways. The compact sheet size transports easily on a ute and is manageable by two people, improving handling and placement. Suitable for residential slabs and pavements where consistent reinforcement controls cracking and improves performance. Tie sheets together and support on bar chairs for correct cover. A reliable, widely specified mesh grade for general slab work in housing and light commercial projects.
-
Reo Point 4mtr x 2mtr 7mm Ute Mesh
This 4m x 2m welded ute/trailer mesh sheet uses 7mm wire for a strong, rigid platform. Ideal for ute trays, trailer floors, ramps, cages and general fabrication. Evenly welded intersections distribute loads and endure harsh use. Supplied as a flat sheet ready to cut, weld and finish to suit your project. A versatile option for repairs, custom builds and agricultural or site work requiring robust, reliable mesh.
-
Reo Point 4mtr x 2mtr x 6mm Ute Mesh
This 4m x 2m welded ute/trailer mesh sheet features 6mm wire for a lightweight yet strong platform. Ideal for ute trays, trailer floors, cages, guards and general fabrication. Evenly welded intersections provide rigidity and durability. Supplied flat for easy cutting, welding and finishing to suit your application. A versatile solution for custom builds, maintenance and agricultural uses where dependable mesh performance is required.
-
Reo Point 4mtr x 2mtr x 7mm Ute Mesh
This 4m x 2m welded ute/trailer mesh sheet uses 7mm wire for a robust, rigid platform. Perfect for ute tray floors, trailer decks, ramps, cages and general fabrication tasks. Consistent welds provide strength and load distribution. Supplied as a flat sheet, ready to cut, weld and finish. A dependable choice for repairs, custom builds and farm or site work requiring durable, long-lasting mesh panels.
-
Reo Point 4mtr x 2mtr x 8mm Ute Mesh
This 4m x 2m welded ute/trailer mesh sheet with 8mm wire delivers extra heavy-duty performance. Ideal for high-load ute trays, trailer floors, ramps and industrial fabrications. Strong welds ensure rigidity and durability in demanding applications. Supplied as a flat sheet for straightforward cutting, welding and finishing. A robust solution for custom builds, repairs and agricultural or site work where strength and longevity are paramount.
-
Swadlings Timber & Hardware 5.8 × 2.4m Steel Reinforcement Mesh Panel – SL62 F62 – Square Grid
This 5.8 × 2.4m steel reinforcement mesh panel in SL62 F62 specification is suited to slabs, driveways, footpaths, and general concrete reinforcement. The square welded grid delivers consistent strength and reliable load distribution across the pour. Its full‑size panel reduces laps and speeds placement on site. Compatible with common spacers and tying methods, it helps achieve uniform slab performance and crack control. A practical choice for residential and light commercial projects requiring dependable, easy‑to‑handle reinforcement mesh panels.
-
Swadlings Timber & Hardware 5.8 × 2.4m Steel Reinforcement Mesh Panel – SL72 F72 – Square Grid
The 5.8 × 2.4m SL72 F72 steel reinforcement mesh panel provides robust support for slabs, pavements, and general concrete elements. Its square welded grid offers dependable strength and uniform load sharing, helping control shrinkage and temperature cracking. Full‑size panels minimise laps for faster installation and consistent coverage. Suitable for residential and light commercial applications, it integrates with standard site practices, chairs, and tying systems. Choose SL72 F72 where a higher reinforcement level is specified for durable, long‑lasting concrete performance.
-
Swadlings Timber & Hardware 5.8 × 2.4m Steel Reinforcement Mesh Panel – SL82 F82 – Square Grid
This SL82 F82 5.8 × 2.4m steel reinforcement mesh panel delivers higher strength for demanding slab and pavement applications. The square welded grid ensures even load distribution and improved crack control across larger pours. Full‑size sheets help reduce lap zones and speed installation, supporting consistent concrete performance. Ideal for residential, driveways with heavier loads, and light commercial slabs, it fits standard chairs and tying systems. Select SL82 F82 where a stronger reinforcement specification is required for durable, long‑term results.
-
Reo Build 5.8m x 2.4m Reinforcing Mesh Sheet – SL72
SL72 welded reinforcing mesh in a 5.8m x 2.4m sheet provides reliable reinforcement for residential slabs, driveways, paths, and shed bases. The uniform grid helps control shrinkage cracking and distributes loads across concrete. Easy to cut and place, it suits general slab construction and renovations. Use as a primary reinforcement layer or in combination with bars and chairs. Ideal for builders, concreters, and DIY projects seeking consistent performance and straightforward handling.
-
Reo Build 5.8m x 2.4m Reinforcing Mesh Sheet – SL82
SL82 welded reinforcing mesh in a 5.8m x 2.4m format offers extra strength for residential and light commercial slabs, driveways, and footpaths. The consistent grid geometry helps minimise cracking and improve load transfer. Straightforward to cut and place, it integrates well with bar chairs and tying wire. Use in slabs on ground, patio areas, and shed floors. A dependable choice for concreters seeking higher reinforcement capacity with efficient installation.
-
Reo Build 5.8m x 2.4m Reinforcing Mesh Sheet – SL92
SL92 welded reinforcing mesh in a 5.8m x 2.4m sheet provides robust reinforcement for higher load applications such as heavy-use driveways, workshop floors, and light commercial slabs. The dense grid improves crack control and load distribution. Simple to cut and fix with standard accessories. Suitable for slabs on ground and thicker sections where additional strength is required. A strong, reliable mesh option to enhance performance and durability in demanding concrete projects.
-
Supply Connect Group 6m x 2.4m Reinforcing Mesh Sheet SL72 – Welded Steel for Concrete Slabs
SL72 welded reinforcing mesh, 6.0m x 2.4m sheet, for reinforcing concrete slabs, driveways, paths and ground beams. Provides consistent strength and crack control across large pours. Easy to cut and place, with stable geometry for reliable cover. Suitable for residential and light commercial applications. Use with bar chairs or spacers to achieve specified cover. Ideal for general slab reinforcement where a balanced combination of strength and handling is required.
-
Supply Connect Group 6m x 2.4m Reinforcing Mesh Sheet SL82 – Heavy-Duty Welded Steel for Slabs
SL82 welded reinforcing mesh, 6.0m x 2.4m sheet, suited to heavier duty slab reinforcement such as driveways, garages and commercial floors. Delivers robust support and controls shrinkage cracking across larger pours. Straightforward to cut, place and tie, ensuring efficient site installation. Use with appropriate bar chairs to maintain cover. A reliable, high-performance mesh option for demanding concrete works where added strength is required.
-
Reo Point 6mm Driveway Mesh Ute 200x200
This 6mm reinforcing mesh with 200 x 200 spacing comes in a convenient ute-size sheet for easy transport and handling on residential sites. Ideal for driveways, paths and small slabs, it improves load distribution and crack control in concrete. The welded mesh delivers consistent strength and quick placement, reducing fixing time on site. Suited to domestic driveways and general paving, it’s a practical option where access is tight and a manageable sheet size is preferred.
-
Reo Point 6mtr x 2.4 x 10mm Mesh
A large-format 6.0m x 2.4m reinforcing mesh panel manufactured from 10mm wire for heavy-duty concrete applications. Ideal for industrial slabs, thick driveways and commercial floors, it provides superior strength and crack control. The welded construction ensures consistent spacing and rapid placement, reducing tying time and improving productivity. Suitable for residential and commercial projects requiring robust reinforcement, these panels help maintain slab integrity under high loads and frequent traffic, enhancing long-term performance and durability.
-
Reo Point 6mtr x 2.4 x 7mm Mesh
This 6.0m x 2.4m reinforcing mesh panel in 7mm wire suits light-duty slabs, footpaths and residential applications. The welded mesh provides consistent spacing and quick installation, improving crack control and slab performance. Large panel size reduces joints and speeds coverage on site. Suitable for general-purpose concrete work, patios and light traffic areas, it balances strength and handling ease, helping achieve reliable reinforcement with efficient placement and dependable, uniform support throughout the slab.
-
Reo Point 6mtr x 2.4 x 8mm Galvanised Mesh
Large format 6m x 2.4m mesh panel made with 8mm galvanised wire for corrosion resistance and long service life. Designed for concrete reinforcement, cages, and general construction applications. The galvanised finish helps protect against rust in harsh environments, while the panel size reduces lap joints and installation time. Suits residential slabs, driveways, precast support, and light civil works.
-
Reo Point 6mtr x 2.4 x 8mm Mesh
A 6.0m x 2.4m reinforcing mesh panel made from 8mm wire, ideal for medium-duty slabs, driveways and commercial areas. The welded sheet offers consistent geometry and quick placement, reducing site labour for tying. Suitable for residential and light commercial applications, it delivers reliable crack control and improved load distribution. Use in slabs, shed floors, paths and general concrete work where balanced strength, ease of handling and efficient coverage are important for long-term performance.
-
Reo Point 6mtr x 2.4mtr x 10mm Mesh
Built for demanding applications, this 6.0m x 2.4m reinforcing mesh panel uses 10mm wire to deliver high strength and durability. Ideal for industrial slabs, commercial floors and heavy-use driveways, it enhances crack control and load distribution. The welded design provides consistent spacing for dependable performance and faster installation. With large coverage per sheet, it minimises joints and improves productivity on site, helping you achieve robust, long-lasting slab reinforcement across a wide range of projects.
-
Reo Point 6mtr x 2.4mtr x 7mm Mesh Galvanised
6m x 2.4m mesh sheet using 7mm galvanised wire for a balance of strength and corrosion protection. Ideal for reinforcing slabs, footpaths, and general construction. The large sheet format minimises laps and speeds installation, while the galvanised coating supports durability in coastal or wet environments. Suited to residential and commercial projects requiring dependable mesh reinforcement.
-
Reo Point 6mtr x 2.4mtr x 9mm Mesh
Heavy duty 6m x 2.4m mesh panel manufactured from 9mm wire for increased stiffness and load distribution. Well-suited to stronger slabs, industrial pavements, and structural elements where robust reinforcement is essential. Large panel size reduces installation time by minimising laps and ties. A reliable option for commercial, industrial, and infrastructure projects needing durable mesh reinforcement.
-
Reo Point 7mm Driveway Mesh Ute 200x200
This 7mm reinforcing mesh with 200 x 200 spacing is supplied in a convenient ute-size sheet for simple transport and handling. Ideal for driveways, pathways and small slabs, it offers improved crack control and load distribution in domestic concrete work. The welded mesh ensures consistent geometry and rapid placement, reducing site labour. Use wherever manageable sheet size, quick installation and reliable reinforcement are important for durable, long-lasting driveway and paving performance.
-
Reo Point Bar/Mesh Galvanising
Professional hot-dip galvanising service for reinforcing bar and mesh to improve corrosion resistance and service life in harsh environments. Ideal for coastal, marine, or chemically exposed structures where durability is critical. Provides a uniform zinc coating that protects steel surfaces and reduces maintenance. Suitable for residential, commercial, and civil projects requiring long-term performance and compliance with durability specifications.
-
Builders Mitre 10 Bricktor Galv Woven Mesh 70mm x 46m
Bricktor Galvanised Woven Mesh provides bed joint reinforcement to improve masonry performance and control cracking. Supplied in a 70mm x 46m roll, it lays easily into mortar joints to strengthen walls and distribute loads around openings and stress points. The galvanised finish resists corrosion during service, while the woven format offers flexibility and easy handling on site. Use in residential and light commercial masonry to enhance durability and structural integrity.
-
Blacktown Building Supplies Concrete Mesh Square 5.8 x 2.4m SL62 Reinforcement Steel F62
This 5.8 × 2.4m steel reinforcement mesh panel in SL62 F62 specification is suited to slabs, driveways, footpaths, and general concrete reinforcement. The square welded grid delivers consistent strength and reliable load distribution across the pour. Its full‑size panel reduces laps and speeds placement on site. Compatible with common spacers and tying methods, it helps achieve uniform slab performance and crack control. A practical choice for residential and light commercial projects requiring dependable, easy‑to‑handle reinforcement mesh panels.
-
Blacktown Building Supplies Concrete Mesh Square 5.8 x 2.4m SL72 Reinforcement Steel F72
The 5.8 × 2.4m SL72 F72 steel reinforcement mesh panel provides robust support for slabs, pavements, and general concrete elements. Its square welded grid offers dependable strength and uniform load sharing, helping control shrinkage and temperature cracking. Full‑size panels minimise laps for faster installation and consistent coverage. Suitable for residential and light commercial applications, it integrates with standard site practices, chairs, and tying systems. Choose SL72 F72 where a higher reinforcement level is specified for durable, long‑lasting concrete performance.
-
Blacktown Building Supplies Concrete Mesh Square 5.8 x 2.4m SL82 Reinforcement Steel F82
This SL82 F82 5.8 × 2.4m steel reinforcement mesh panel delivers higher strength for demanding slab and pavement applications. The square welded grid ensures even load distribution and improved crack control across larger pours. Full‑size sheets help reduce lap zones and speed installation, supporting consistent concrete performance. Ideal for residential, driveways with heavier loads, and light commercial slabs, it fits standard chairs and tying systems. Select SL82 F82 where a stronger reinforcement specification is required for durable, long‑term results.
-
Sydney Hardware EXPANDAMESH FOR RENDER Diamond Mesh Lath 2440x700MM - GALVANISED
Expanded metal diamond mesh lath providing a strong mechanical key for renders and scratch coats over masonry, concrete, EPS and framed substrates. The 2440 x 700 mm galvanised steel sheet is lightweight, easy to cut and fast to fix with screws or nails. Corrosion-resistant zinc coating supports exterior use, while the open profile promotes excellent mortar adhesion and drying. Ideal for soffits, ceilings, irregular surfaces and reinforcement at stress points to reduce cracking.
-
Sydney Hardware EXPANDAMESH FOR RENDER Diamond Mesh Lath 2440x700MM - STAINLESS 304
Premium expanded metal diamond mesh lath for render reinforcement in aggressive or coastal environments. The 2440 x 700 mm 304 stainless steel sheet offers superior corrosion resistance, long service life and a robust mechanical key for renders and scratch coats on various substrates. Lightweight and easy to trim, it installs quickly and promotes excellent mortar adhesion and curing. Ideal for facades, soffits and high-exposure areas where durability and crack control are critical.
-
Reo Point Foamjoint Adh 125mmx10mmx25mtr
Adhesive-backed foam expansion joint, 125mm wide x 10mm thick x 25m roll, for forming isolation and expansion joints in concrete slabs and pavements. The self-adhesive backing speeds placement on formwork or adjacent surfaces. Compressible, closed-cell foam accommodates movement and reduces cracking. Ideal for driveways, paths, and wall/slab interfaces, providing a neat, low-maintenance joint detail.
-
Reo Point Frame 600x600 GALV Heel Proof
600 x 600mm galvanised frame and heel-proof grate assembly designed for pedestrian safety and durability. Provides a secure, slip-resistant surface over pits and access points. Corrosion-resistant finish and robust build suit outdoor and high-traffic environments. Easy to install for a neat, professional result.
-
Reo Point Frame 920x920 GALV
920 x 920mm galvanised frame with grate/cover for access pits and sumps. Heavy-duty construction and corrosion resistance ensure long service life. Suitable for commercial and residential installations requiring reliable access and drainage.
-
Reo Point Frame Clamped 920x920 flat top
920 x 920mm galvanised clamped frame with flat top grate for secure, rattle-free seating over pits. Clamping system improves safety and prevents grate movement. Durable, corrosion-resistant components for outdoor use. Ideal for service pits and drainage points in high-use areas.
-
Reo Point Frame Gal Set 1000x1000X50mm
1000 x 1000 x 50mm galvanised frame and grate set engineered for access pits and drainage points. Strong, corrosion-resistant construction for long-term durability. Provides a neat, safe surface suitable for pedestrian and light vehicle areas.
-
Reo Point Frame Galv Linear 920x920x50
920 x 920 x 50mm galvanised linear frame and grate assembly for drainage installations. Designed for robust performance and corrosion resistance in external environments. Straightforward installation delivers a professional, safe finish over pits and channels.
-
Reo Point Frame H/P 920x920x50mm
920 x 920 x 50mm galvanised frame with heel-proof grate for pedestrian safety and comfort. Prevents heel catch while maintaining drainage performance. Rugged build and corrosion resistance suit outdoor, high-traffic applications.
-
Reo Point Frame Heavy Duty Galv Linear H/P 920x920x50
Heavy duty 920 x 920 x 50mm galvanised linear frame with heel-proof grate for demanding environments. Engineered for strength, durability, and pedestrian safety. Ideal for commercial and industrial sites requiring long-lasting pit covers and drainage access solutions.
-
Reo Point Gal Mesh 100x100 3000x2400x4mm
This galvanised welded wire mesh sheet measures 3000 x 2400mm with 100 x 100mm apertures and 4mm wire diameter. The hot-dip galvanised finish offers strong corrosion resistance for indoor and outdoor use. Ideal for cages, barriers, safety guards, trellises and render backing, it cuts and fixes easily while maintaining rigidity. Suitable for construction, landscaping and fabrication tasks, it provides durable, versatile reinforcement and screening across a wide range of projects.
-
Reo Point Gal Mesh 25x25 1200x2400x3mm
This 1200 x 2400mm galvanised welded wire mesh features a 25 x 25mm aperture in 3mm wire, providing a fine, rigid grid for protection screens, cages and small-animal enclosures. The galvanised coating resists corrosion, making it suitable for exterior applications. Easy to cut, shape and fix, it supports construction, fencing, rendering and general fabrication. Use where tighter mesh spacing is required for safety, containment or support while maintaining strength and durability.
-
Reo Point Gal Mesh 25x25 3000x2400x3mm
This large-format 3000 x 2400mm galvanised welded wire mesh sheet has 25 x 25mm apertures with 3mm wire, offering a fine grid for protective barriers, screening and render support. The galvanised finish provides excellent corrosion resistance outdoors. Rigid yet workable, it cuts and fixes readily for construction, landscaping and fabrication tasks. Choose this tighter aperture when improved containment, safety or backing is needed without compromising durability and long-term performance.
You have seen 48 out of 81 products
