Sydney Timber & Hardware
-
Sydney Timber & Hardware 10.4mm Galvanised Steel Hex Nuts – Heavy Duty – Box of 100 for Bolts & Fastening
10.4mm Galvanised Hex Nuts – Box of 100. Robust, corrosion-resistant nuts for outdoor and general building applications. The galvanised coating provides improved protection in exposed or damp conditions, supporting long-term, reliable joints. Ideal for use with compatible bolts and threaded rods in steel framing, brackets, and hardware assemblies. Supplied in a contractor-friendly pack of 100 to minimise downtime and ensure you have stock on hand for site work and maintenance tasks.
-
Sydney Timber & Hardware 100 x 100 x 200 x 8mm Galvanised Steel Angle Bracket – Heavy Duty for Framing & Bracing
Extra-heavy galvanised steel angle for demanding bracing and support duties. Dimensions: 100 x 100 x 200 x 8mm (typically leg A x leg B x length x thickness). Thick 8mm steel and galvanised coating provide strength and corrosion resistance for outdoor, structural, and coastal use. Suitable for mounting posts, heavy shelving, frames, and machinery brackets. Fix with bolts or screws into timber or steel. Use with matching galvanised fasteners to ensure a durable, rust-resistant connection.
-
Sydney Timber & Hardware 100 x 100 x 37 x 6mm Steel Wide Angle Bracket – 6mm Thick for Structural Connections
Designed for higher loads, this wide angle bracket features a 6mm thick galvanised steel body and an extended 37mm face for increased bearing area and stability. Ideal for anchoring beams, posts and ledgers, reinforcing corners, and assembling heavy‑duty frames in timber or light steelwork. The hot‑dip galvanised finish delivers excellent corrosion resistance for outdoor and coastal environments. Drill to suit bolts or screws, enabling fast, accurate installation on demanding construction projects.
-
Sydney Timber & Hardware 100 x 100 x 37 x 6mm Steel Wide Angle Bracket – for Structural Connections & Bracing
Heavy-duty galvanised wide angle bracket measuring 100 x 100 x 37 x 6mm for corrosion-resistant corner reinforcement. The wider profile and 6mm thickness provide increased bearing area and rigidity, ideal for decks, pergolas, carports, and heavy bracing. Suitable for indoor and outdoor use, it supports timber-to-timber or timber-to-masonry connections where strength, stability, and reliable alignment are critical. A robust, trade-quality connector for demanding site conditions and structural applications.
-
Sydney Timber & Hardware 100 x 100 x 40 x 5mm Galvanised Steel Angle Bracket – for Structural Connections & Bracing
Engineered for dependable 90° corner connections, this galvanised steel angle bracket combines a 5mm thick section with durable corrosion protection for a long service life. The compact profile is ideal for tying joists to beams, reinforcing frames, mounting shelves and fabricating light structural assemblies. Suitable for timber, steel or masonry with bolts, screws or anchors as required. The galvanised finish withstands outdoor and coastal conditions, delivering a robust, trade‑ready solution for residential, commercial and industrial projects.
-
Sydney Timber & Hardware 100 x 100 x 40 x 5mm Galvanised Steel Angle Bracket – for Structural Connections & Framing
Galvanised 90° angle bracket sized 100 x 100 x 40 x 5mm for corrosion-resistant, medium-heavy corner reinforcement. The 5mm steel construction ensures dependable stiffness and durability, ideal for timber framing, pergolas, shelving supports, and general bracing. Suitable for indoor and outdoor use, it facilitates timber-to-timber or timber-to-masonry connections where reliable alignment and long service life are needed. A versatile, trade-ready connector for everyday construction and maintenance tasks.
-
Sydney Timber & Hardware 100 x 100 x 50 x 5mm Galvanised Steel Angle Bracket – for Structural Connections & Bracing
Built for robust 90° corner reinforcement, this galvanised steel angle bracket features a 5mm thick section for high rigidity and dependable load transfer. The corrosion‑resistant coating suits outdoor, damp or coastal conditions. Use it to connect joists, brace frames, mount ledgers and assemble light structural fabrications in timber or steel. Drill to accommodate bolts, screws or anchors as needed. A durable, trade‑ready bracket for decks, pergolas, stairs and general construction applications.
-
Sydney Timber & Hardware 100 x 100 x 50 x 5mm Galvanised Steel Angle Bracket – for Structural Connections & Framing
Galvanised 90° angle bracket measuring 100 x 100 x 50 x 5mm for corrosion-resistant reinforcement of corners and joints. The 5mm thickness provides reliable rigidity, ideal for timber framing, pergolas, decks, and general construction. Suitable for indoor and outdoor applications, it supports timber-to-timber or timber-to-masonry connections, ensuring stable alignment and long-term durability. A versatile, trade-ready bracket for everyday site work and maintenance tasks requiring robust performance.
-
Sydney Timber & Hardware 100 x 100 x 50 x 8mm Galvanised Steel Angle Bracket – Heavy Duty for Framing & Bracing
Compact but thick galvanised steel angle for heavy-duty 90° reinforcement. Dimensions: 100 x 100 x 50 x 8mm (typically leg A x leg B x length x thickness). The 8mm section and galvanised coating deliver strength and corrosion resistance for outdoor and industrial use. Ideal for anchoring posts, machinery brackets, frames, and high-load shelving. Suitable for bolt or screw fixing into timber or steel. Use with galvanised fasteners for a durable, rust-resistant connection.
-
Sydney Timber & Hardware 100 x 100 x 50 x 8mm Galvanised Steel Angle Bracket – Heavy Duty for Structural Connections
Extra heavy-duty galvanised 90° angle bracket sized 100 x 100 x 50 x 8mm, engineered for superior rigidity and corrosion resistance. The 8mm thickness delivers high load capacity, ideal for structural timber framing, pergolas, industrial racking, and heavy bracing. Suitable for indoor and outdoor use, providing long service life in exposed environments. Use for timber-to-timber or timber-to-masonry connections where maximum stability, alignment accuracy, and durability are essential on demanding projects.
-
Sydney Timber & Hardware 100 x 100 x 8mm Galvanised Steel Angle Bracket – Heavy Duty for Structural Connections
Extra heavy-duty galvanised steel angle bracket measuring 100 x 100 x 200 x 8mm for demanding bracing and support tasks. The thick 8mm section offers exceptional rigidity, while galvanising helps resist corrosion in outdoor and exposed conditions. Ideal for heavy shelves, pergolas, portals, timber posts and general structural reinforcement. Suitable for creating robust timber-to-timber or timber-to-masonry right-angle connections. Designed for trade reliability, fast installation and long service life in residential and light commercial construction applications.
-
Sydney Timber & Hardware 100 x 45mm x 3.6m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Red colour‑coded LVL 100 x 45mm, 3.6m length, structural grade E13 with H2 termite treatment for internal, above‑ground use. High stiffness and strength make it ideal for lintels, floor trimmers, and roof members. Engineered straightness ensures predictable performance and clean finishes. Excellent fastener‑holding for secure, durable connections. The distinct red finish aids quick on‑site identification and stock control. A dependable, versatile beam for residential and commercial framing where consistency and reliability matter.
-
Sydney Timber & Hardware 100 x 45mm x 5.4m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Red colour‑coded LVL section 100 x 45mm, 5.4m long, E13 structural grade with H2 termite treatment for internal, above‑ground applications. Provides strong, stable performance for lintels, joists, trimmers, and roof members. Engineered to be straight and uniform, reducing waste and speeding installation. Reliable fastener‑holding supports robust connections. The red finish enables easy identification on busy sites. A proven choice for quality framing and medium‑span structural elements in residential and light commercial builds.
-
Sydney Timber & Hardware 100 x 45mm x 6.0m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
LVL beam 100 x 45mm, 6.0m length, red colour‑coded for quick identification, E13 structural grade with H2 termite treatment for internal, above‑ground use. Delivers dependable strength and stiffness for lintels, trimmers, and roof members across longer spans. Straight, stable, and easy to work with using standard saws and fixings. Excellent holding for screws and nails ensures durable, secure connections. Ideal where uniform engineered performance and extended lengths improve build efficiency and finish quality.
-
Sydney Timber & Hardware 100 x 45mm x 7.2m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Engineered LVL 100 x 45mm, 7.2m long, red colour‑coded, E13 grade with H2 termite treatment for internal above‑ground use. Suited to medium lintels, roof members, and floor trimmers requiring extended span capability and consistent performance. Manufactured for straightness and dimensional stability to minimise movement and speed installation. Strong fastener‑holding enables reliable structural connections. A versatile solution for efficient framing and longer runs in residential and commercial construction.
-
Sydney Timber & Hardware 100 x 45mm x 8.4m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Red colour‑coded LVL beam 100 x 45mm, 8.4m length, E13 structural grade with H2 termite treatment for internal, above‑ground applications. Excellent for long lintels, continuous trimmers, and roof members where longer stock reduces joins and speeds installation. Engineered straightness and uniformity deliver predictable strength and stiffness. Accepts screws and nails securely for robust connections. A practical, high‑performance option for demanding spans in residential and light commercial builds.
-
Sydney Timber & Hardware 100 x 63mm x 3.6m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
LVL section 100 x 63mm, 3.6m, red colour‑coded for identification, E13 grade with H2 termite treatment for internal, above‑ground use. The thicker profile boosts stiffness and load capacity for heavier lintels, trimmers, and beams. Engineered for straightness and stability to ensure clean lines and predictable behaviour. Strong fastener‑holding provides durable connections. Ideal where compact sections with higher performance are required in residential and commercial structures.
-
Sydney Timber & Hardware 100 x 63mm x 5.4m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Structural LVL 100 x 63mm, 5.4m length, red colour‑coded, E13 grade with H2 termite treatment for internal above‑ground applications. Offers enhanced stiffness and load‑carrying for heavy lintels, floor trimmers, and roof beams. Engineered uniformity ensures straight, stable members that install quickly and reliably. Excellent screw and nail holding supports strong, long‑lasting connections. A versatile, high‑performance option where compact depth and robust strength are both required.
-
Sydney Timber & Hardware 100 x 63mm x 6.0m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
High‑performance LVL beam 100 x 63mm, 6.0m long, red colour‑coded for easy site recognition. E13 structural grade with H2 termite treatment for internal, above‑ground use. The thicker section provides excellent stiffness for heavy lintels, trimmers, and medium beams. Straight, stable, and consistent, it speeds installation and reduces waste. Strong fastener‑holding ensures dependable structural connections. Ideal for quality residential and commercial projects demanding reliable engineered performance.
-
Sydney Timber & Hardware 100 x 63mm x 7.2m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
Engineered LVL 100 x 63mm, 7.2m length, red colour‑coded, E13 grade with H2 termite treatment for internal above‑ground applications. Combines higher stiffness with extended length for demanding lintels, trimmers, and roof members. Manufactured for straightness and dimensional stability, delivering predictable performance and clean finishes. Excellent screw and nail holding supports robust, durable connections. A dependable choice where longer spans and compact depth are both required.
$100.08
-
Sydney Timber & Hardware 100 x 63mm x 8.4m LVL Structural Beam – RED H2 Termite Treated, E13 for Framing
LVL beam 100 x 63mm, 8.4m long, red colour‑coded for quick identification, E13 structural grade with H2 termite treatment for internal, above‑ground use. Offers strong stiffness and load capacity across long spans for major lintels and roof members. Engineered straightness provides reliable performance and simplified installation. Excellent fastener‑holding for secure, long‑lasting connections. Ideal for projects seeking long stock lengths to reduce joins and improve efficiency.
$116.76
-
Sydney Timber & Hardware 100mm Galvanised Multi-Grip Timber Connector – Pre-Punched Strap for Framing
Compact 100 mm multi grip angle bracket for versatile timber-to-timber and timber-to-masonry connections. Multiple fixing holes allow flexible anchor patterns and easy alignment. Ideal for studs, joists, plates, ledgers and general framing fix-outs where a small but strong connector is needed. Use with appropriate nails, screws or anchors to suit the substrate. A reliable, easy-to-install bracket for builders and carpenters working across new construction and renovation projects.
-
Sydney Timber & Hardware 100mm Multi-Grip Timber Connector – Steel Strap for Framing & Bracing
Robust galvanised multi‑grip connector for quick nail‑on joining of timber members. The 100mm size suits joists, studs and truss connections where compact, high‑strength bracing is required. Multiple nailing points provide excellent load transfer, while the galvanised finish withstands outdoor exposure and coastal conditions. Use for framing, decks, pergolas and general repairs to achieve neat, repeatable connections with standard nails or screws. A reliable, trade‑ready connector for fast site installation.
-
Sydney Timber & Hardware 100mm x 10mm x 25m Foam Expansion Joint Roll – for Concrete & Masonry Control Joints
100mm x 10mm x 25m Foam Expansion Joint Filler – Closed Cell. A versatile, non-adhesive jointing foam for accommodating movement in concrete slabs, pavements, and kerb work. Closed-cell construction limits water ingress, maintains compressibility, and protects slab edges from spalling. Supplied in long rolls for efficient layout across large pours. Simple to cut and position to specified joint widths, providing reliable separation between adjoining pours and enhancing overall concrete durability and finish quality.
-
Sydney Timber & Hardware 100mm x 10mm x 25m Foam Expansion Joint – Compressible Filler for Concrete Control Joints
Closed-cell foam expansion joint filler designed to accommodate movement and relieve stress in concrete slabs, paths, and pavements. The 100mm width offers versatile coverage across common slab depths, while the 10mm thickness delivers consistent compression performance. Supplied in a 25m roll to reduce cutting and waste on site. Easy to cut, place, and secure, and suitable for use in residential and light commercial projects. Improves joint durability and appearance by helping control cracking and edge spalling.
-
Sydney Timber & Hardware 10G x 100mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 100mm zinc-plated chipboard screws designed for strong fixing into particleboard, MDF and softwood. The coarse thread provides fast bite and excellent holding power, while the countersunk head delivers a flush finish that’s easy to fill or conceal. Zinc plating offers clean appearance and light corrosion protection for interior applications. Ideal for cabinetry, shelving, subflooring and general carpentry. Supplied in a box of 100 to keep projects moving. Compatible with common driver bits for efficient, reliable installation.
-
Sydney Timber & Hardware 10G x 65mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 65mm zinc-plated chipboard screws engineered for strong, reliable fixing in particleboard, MDF and softwood. Coarse threads drive quickly and grip firmly, while countersunk heads provide a neat, flush finish. Zinc plating offers light corrosion protection for interior environments. Ideal for cabinet carcasses, benchtop supports, shelving and general joinery. Supplied in a box of 100 for continuous productivity on site or in the workshop. Compatible with common driver bits for smooth, repeatable installation and professional outcomes.
-
Sydney Timber & Hardware 10G x 75mm Chipboard Screws – Zinc Plated – Box of 100 for Particleboard & Timber
10G x 75mm zinc-plated chipboard screws for secure fixing into particleboard, MDF and softwood in interior projects. A coarse thread ensures fast driving and high pull-out strength, while the countersunk head seats flush for a clean finish ready for filling or painting. Zinc plating provides light corrosion resistance and a tidy look indoors. Ideal for cabinetry, furniture assembly, shelving and general carpentry. Box of 100 supports ongoing work with fewer interruptions. Suits standard driver bits for consistent results.
-
Sydney Timber & Hardware 10mm x 24mm x 2mm Galvanised Flat Washers – Box of 100 for Bolts & Anchors
Box of 100 galvanised flat washers featuring 10mm internal diameter, 24mm outside diameter, and 2mm thickness. Designed to spread clamping loads, minimise surface damage, and improve joint reliability with bolts and screws. The galvanised finish offers strong corrosion resistance for outdoor and coastal use. Suitable for fencing, framing, bracket assembly, equipment mounting, and general construction. Pair with galvanised fasteners to maintain a consistent protective system and enhance the long-term performance of your connections.
-
Sydney Timber & Hardware 110 x 18mm x 5.4m H3 Treated Primed DAR Finger-Jointed Pine – External, Ready to Paint
Purpose‑made for exterior, above‑ground applications, this 110 x 18mm, 5.4m H3 Primed DAR FJ Pine offers straight, smooth, paint‑ready sections. Finger‑jointed and dressed all round, it is factory primed to accelerate installation and top coating. H3 treatment provides resistance to decay and insect attack when correctly painted and maintained. Ideal for fascias, trims, battens, architraves and finishing details, it delivers consistent profiles that minimise prep time and help achieve durable, professional results outdoors.
-
Sydney Timber & Hardware 110mm x 10m Alcore Dampcourse Flashing – Moisture & Termite Barrier for Masonry
Compact 110mm x 10m Alcore dampcourse and flashing designed for tight detailing and retrofit needs. Provides a practical barrier against rising damp and assists with directing moisture to weep holes. Flexible and easy to work with for clean installation at narrow wall elements. Use in accordance with plans and good masonry practice, paying attention to laps and terminations to ensure continuous moisture protection and a professional finish.
-
Sydney Timber & Hardware 110mm x 30m Alcore Dampcourse Flashing – Moisture & Termite Barrier for Masonry
Narrow-width Alcore dampcourse and flashing for precise masonry detailing where space is limited. The 110mm x 30m roll is ideal for selective dampcourse layers and compact cavity details. Flexible and easy to cut, supporting clean corners and transitions. Designed to combat rising damp and direct moisture toward weep holes. Use according to plans and good masonry practice, ensuring correct laps and terminations to maintain continuity and long-term moisture management.
-
Sydney Timber & Hardware 110mm x 30m Poly Dampcourse (Polycourse) – Moisture Barrier for Brick & Blockwork
110mm x 30m Poly Dampcourse (Polycourse) – Moisture Barrier for Masonry. Narrow-width DPC suitable for specific wall thicknesses and detail locations. Blocks rising damp and helps prevent moisture transfer into sensitive materials and finishes. Manufactured from durable, rot-resistant polyethylene for long-term performance. Simple to cut and lay under masonry courses with proper laps and continuity. A practical, economical damp-proofing solution for residential and light commercial building projects.
-
Sydney Timber & Hardware 110mm x 30m Poly Dampcourse – Waterproof Moisture Barrier for Brickwork & Masonry
This 110mm x 30m Polycourse dampcourse roll is a compact, versatile polyethylene barrier for controlling rising damp in masonry construction. Positioned above footings and under wall frames, it safeguards interior finishes and contributes to long-term durability. The flexible sheet is simple to cut, lap and tape, making it ideal for narrow walls, cavity applications and sill details. A practical DPC solution for residential and small commercial projects where clean, efficient moisture management is required.
-
Sydney Timber & Hardware 111 x 60 x 65 x 2mm Galvanised Fence Rail Bracket – for Secure Rail-to-Post Fixing
Galvanised fence rail bracket for secure, square alignment of rails to posts. Dimensions: 111 x 60 x 65 x 2mm. The corrosion-resistant finish ensures long service life in outdoor and coastal environments. Provides rigid support and quick placement to streamline fence construction and repairs. Compatible with standard screws or bolts for timber posts and rails. Use with galvanised fasteners and washers to maintain system-wide corrosion protection and deliver reliable, clean-looking fence connections.
-
Sydney Timber & Hardware 111 x 60 x 65 x 2mm Galvanised Steel Fence Rail Bracket – for Rail Connections
Galvanised steel fence rail bracket measuring 111 x 60 x 65 x 2mm for durable, corrosion‑resistant rail-to-post connections. The compact 2mm thickness suits light to medium duty fixing while providing reliable support in outdoor environments. Ideal for timber fencing, rural enclosures, garden screens, and general maintenance work. Use for quick, clean rail alignment and secure fastening on site. Suitable for tradies and DIY projects, offering dependable performance where moisture exposure and weathering are concerns.
-
Sydney Timber & Hardware 119 x 30mm Meranti Door Jamb – 38 x 12mm Stop Rebate (SR) for Internal Joinery
Premium Meranti door jamb section, 119 x 30mm with a single rebate 38 x 12mm, ideal for internal door frame construction. Meranti offers stability, smooth machining and an attractive grain suitable for staining or painting. Precision dressed for consistent sizing and easy installation. Suits standard door stops and hardware preparation. Use for new frames or retrofit work in residential and light commercial projects. Seal and finish all faces and cut ends to promote durability and a professional result.
-
Sydney Timber & Hardware 12.4mm Galvanised Steel Hex Nuts – Box of 100 for Bolts & General Fastening
12.4mm Galvanised Hex Nuts – Box of 100. Heavy-duty corrosion-resistant nuts for general construction, outdoor structures, and coastal or high-moisture environments. The hot-dip galvanised finish enhances durability and service life, ensuring reliable clamping with compatible bolts and threaded rods. Suitable for fastening steelwork, framing, brackets, and fixtures. Supplied in a trade pack of 100 for efficient on-site use and replenishment. Match thread size to corresponding bolts or anchor studs for secure assemblies.
-
Sydney Timber & Hardware 120 x 35 x 35 x 1mm Galvanised Steel Angle Bracket – for Fixing & Bracing
Light-duty galvanised steel angle for neat 90° connections in light framing and trim work. Dimensions: 120 x 35 x 35 x 1mm (typically length x leg A x leg B x thickness). The galvanised finish offers corrosion resistance for exterior applications. Ideal for small shelving, fascia details, cabinet bracing, and craft projects. Suitable for screw or bolt fixing to timber or sheet metal. Combine with compatible galvanised fasteners to enhance durability and achieve a professional result.
-
Sydney Timber & Hardware 120 x 35 x 35 x 1mm Galvanised Steel Angle Bracket – for Structural Connections & Framing
A compact galvanised 90° angle bracket measuring 120 x 35 x 35 x 1mm, designed for corrosion resistance and neat corner reinforcement. Ideal for lightweight applications including cabinetry, screening, light timber framing, and general repairs. The 1mm thickness provides a low-profile fit while maintaining essential rigidity for alignment and bracing tasks. Suitable for indoor and outdoor use, this bracket assists with timber-to-timber or timber-to-metal connections where a discreet, reliable fix is required.
-
Sydney Timber & Hardware 125mm x 10mm x 25m Adhesive Foam Expansion Joint – for Concrete Control Joints
Adhesive-backed closed-cell foam expansion joint for larger control and isolation joints in concrete. The 125mm width provides broader coverage for perimeter and slab edge details, while 10mm thickness allows reliable movement accommodation. Supplied in a 25m roll for efficient handling and minimal joins. Quick to position, with strong initial tack on clean, dry surfaces. Helps reduce cracking, allows slab movement, and improves joint aesthetics in driveways, footpaths, and commercial slab applications.
-
Sydney Timber & Hardware 125mm x 10mm x 25m Foam Expansion Joint – Self-Adhesive for Concrete & Masonry Joints
125mm x 10mm x 25m Self-Adhesive Foam Expansion Joint Filler – Closed Cell. Wide joint filler for larger slabs and pavement pours. The pressure-sensitive adhesive backing enables rapid placement, while closed-cell foam provides dependable compressibility and minimal water uptake. Reduces stress transfer, helps control cracking, and improves joint performance in concrete driveways, footpaths, and industrial slabs. Easy to trim and handle on site, supporting clean edges and consistent spacing for high-quality concrete finishes.
-
Sydney Timber & Hardware 12mm x 28mm x 2mm Galvanised Flat Washers – Box of 100 for Bolts & Anchors
Box of 100 galvanised flat washers with 12mm internal diameter, 28mm outside diameter, and 2mm thickness. Provide a broad bearing surface to distribute load, reduce pull-through, and protect timber or metal substrates. Galvanised coating delivers dependable corrosion resistance in exterior and coastal environments. Ideal for use with bolts and threaded fasteners in fencing, framing, brackets, and general construction. Consistent sizing ensures a reliable fit. Use with matching galvanised bolts and nuts to maintain system-wide corrosion protection.
-
Sydney Timber & Hardware 130 x 63mm x 6.0m LVL Structural Beam – H2 Termite Treated, E13 for Framing
Structural LVL 130 x 63mm, 6.0m length, grade E13 with H2 termite treatment for internal, above‑ground use. The deeper, thicker section delivers excellent stiffness and load capacity for heavy lintels, floor trimmers, and roof beams. Engineered for straightness and dimensional stability, providing predictable performance and reduced creep. Reliable screw and nail holding for robust connections. A versatile choice for demanding spans where strength, consistency, and ease of installation are required in quality construction.
-
Sydney Timber & Hardware 130mm Galvanised Multi-Grip Timber Connector – Pre-Punched Strap for Framing
Versatile 130 mm multi grip angle bracket designed for robust timber connections with flexible fixing options. The multi-hole pattern supports varied fastener layouts and simplifies positioning. Ideal for joists, studs, plates, ledgers and general framing. Suits nails, screws or anchors as required. A dependable connector for decks, pergolas, light framing and renovation work where quick, secure bracing and restraint are needed without bulky hardware.
-
Sydney Timber & Hardware 130mm Multi-Grip Timber Connector – Steel Strap for Framing & Bracing
A heavy‑duty galvanised multi‑grip connector designed for fast nail‑on joining of timber members. The 130mm length offers increased contact area and load transfer for joists, studs and truss connections. Corrosion‑resistant galvanising suits outdoor and coastal use, while multiple nailing points deliver strong, consistent performance. Ideal for framing, decks, pergolas and remedial works. Install with standard nails or screws to achieve neat, repeatable connections across residential and commercial projects.
-
Sydney Timber & Hardware 135 x 19mm Spotted Gum Hardwood Decking Boards – Durable for Outdoor Use
Premium 135 x 19mm Spotted Gum decking boards supplied in for efficient set-out and reduced waste. This hard, durable Australian hardwood provides rich colour variation and excellent wear resistance in outdoor environments. Kiln-dried for stability and dressed smooth for a clean finish, it’s ideal for residential decks, balconies and boardwalks. Install with suitable fixings and finish with exterior decking oil or coating to enhance longevity and appearance. A professional-grade choice for long-lasting external decking.
-
Sydney Timber & Hardware 135 x 19mm Spotted Gum Hardwood Decking Boards – Natural Finish for Outdoor Decks
Premium 135 x 19mm Spotted Gum decking supplied in for efficient set-out and minimal waste. A dense Australian hardwood with rich colour variation, excellent durability and abrasion resistance. Kiln-dried for stability and dressed for a smooth finish. Ideal for high-traffic decks, walkways and outdoor living areas. Allow appropriate ventilation and drainage, and fix with stainless steel screws or concealed systems. Seal cut ends and pre-finish edges to maximise performance and service life in exposed environments.
You have seen 48 out of 616 products
